Bog/hesitation on shift - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AlligatorMan · 04-30-2005, 12:30 AM

Have a '91 240sx with no codes and pass emissions very clean. Car pulls 23 inHg vacuum at idle. Everything seems to be in check and tuned up with new parts.

Here's the scenario...when I shift (especially when the engine is cold) the car hesitates for almost a full second before it will start chugging along. This happens in all gear but not necessarily all the time.

Any ideas?

007jpang · 04-30-2005, 01:02 AM

i have the same problem... but it only happens in first gear for me...

my mechanic told me to just clean the throttle body with sea foam...but im really not sure what the problem is

john

kandyflip445 · 04-30-2005, 02:33 AM

Buy some throttle body cleaner. Remove the intake piping on the TB. Spray it down, if you have a brush (a gentle one) use that to get some of the gunk off. Spray it down some more. Adjust the cable tension. Start car and clear out the cleaner (rev it). Adjust idle. Took me like 10 min. and my car runs a lot smoother now. But the damn thing still has a little trouble because my tranny mount is torn and the engine mounts are old too.

AlligatorMan · 04-30-2005, 10:23 AM

My throttle body is clean, as well as the intake tract. I took the intake manifold off last year and cleaned the hell out of it.

Today I'm going to swap CAS, TPS, clean spark plugs, and check cam timing. I'll let you know how that goes.

04-30-2005, 12:30 AM	#1
AlligatorMan Join Date: Jan 2002 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Bog/hesitation on shift Have a '91 240sx with no codes and pass emissions very clean. Car pulls 23 inHg vacuum at idle. Everything seems to be in check and tuned up with new parts. Here's the scenario...when I shift (especially when the engine is cold) the car hesitates for almost a full second before it will start chugging along. This happens in all gear but not necessarily all the time. Any ideas? __________________ '91 Hatch

04-30-2005, 01:02 AM	#2
007jpang Zilvia Junkie Join Date: Jan 2004 Location: Daly City/ San Jose Posts: 495 Trader Rating: (0) Feedback Score: 0 reviews	i have the same problem... but it only happens in first gear for me... my mechanic told me to just clean the throttle body with sea foam...but im really not sure what the problem is john __________________ April 24th, 1915 http://www.shockdrifting.com

04-30-2005, 02:33 AM	#3
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 36 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	Buy some throttle body cleaner. Remove the intake piping on the TB. Spray it down, if you have a brush (a gentle one) use that to get some of the gunk off. Spray it down some more. Adjust the cable tension. Start car and clear out the cleaner (rev it). Adjust idle. Took me like 10 min. and my car runs a lot smoother now. But the damn thing still has a little trouble because my tranny mount is torn and the engine mounts are old too. __________________ My 240 vBgarage

04-30-2005, 10:23 AM	#4
AlligatorMan Join Date: Jan 2002 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	My throttle body is clean, as well as the intake tract. I took the intake manifold off last year and cleaned the hell out of it. Today I'm going to swap CAS, TPS, clean spark plugs, and check cam timing. I'll let you know how that goes. __________________ '91 Hatch

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode