Shifted Performance - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

delado · 04-11-2012, 12:36 PM

Quote:

Originally Posted by i need tires

researching does matter 100%, if not I could be a doctor right now just because I "said so"

Your lack of research was part of the issue, their lack of professionalism is part of the issue. Both are at fault in this situation as that f##### Drake would say #yolo and move on!

Obviously you have not done yours because if you did you would have read this rule on this forum:

Disparaging/Derogatory Remarks

To disparage ones sex, race, beliefs, lifestyles, etc will result in ONE warning, further offenses will get you banned. ANYTHING that can be construed as a disparaging comment regarding sex, race, beliefs, lifestyles, or other included; in a direct quote or not, from TV or not. Your warning will be a 1 month Pinking for Disparaging or Derogatory Remarks.

And I have reported you so don't try to modify your post. Have fun on your vacation. Your posts were useless anyways.

i need tires · 04-11-2012, 12:41 PM

Quote:

Originally Posted by delado

Obviously you have not done yours because if you did you would have read this rule on this forum:

Disparaging/Derogatory Remarks

To disparage ones sex, race, beliefs, lifestyles, etc will result in ONE warning, further offenses will get you banned. ANYTHING that can be construed as a disparaging comment regarding sex, race, beliefs, lifestyles, or other included; in a direct quote or not, from TV or not. Your warning will be a 1 month Pinking for Disparaging or Derogatory Remarks.

And I have reported you so don't try to modify your post. Have fun on your vacation. Your posts were useless anyways.

hahahahahahahahahahahahahahahahahahahahahahahahhah a (ok my hands are tired)

I wasnt even talking about the OP... read please, I was talking about the rapper Drake. Please read before you get all billy badass with the "report" button.

travismaser · 04-11-2012, 12:42 PM

Quote:

Originally Posted by delado

Obviously you have not done yours because if you did you would have read this rule on this forum:

Disparaging/Derogatory Remarks

To disparage ones sex, race, beliefs, lifestyles, etc will result in ONE warning, further offenses will get you banned. ANYTHING that can be construed as a disparaging comment regarding sex, race, beliefs, lifestyles, or other included; in a direct quote or not, from TV or not. Your warning will be a 1 month Pinking for Disparaging or Derogatory Remarks.

And I have reported you so don't try to modify your post. Have fun on your vacation. Your posts were useless anyways.

lolz, wow...this just made my whole day lol

i need tires · 04-11-2012, 12:47 PM

Quote:

Originally Posted by delado

Obviously you have not done yours because if you did you would have read this rule on this forum:

Disparaging/Derogatory Remarks

To disparage ones sex, race, beliefs, lifestyles, etc will result in ONE warning, further offenses will get you banned. ANYTHING that can be construed as a disparaging comment regarding sex, race, beliefs, lifestyles, or other included; in a direct quote or not, from TV or not. Your warning will be a 1 month Pinking for Disparaging or Derogatory Remarks.

And I have reported you so don't try to modify your post. Have fun on your vacation. Your posts were useless anyways.

I kind of figured you would jump on the OPs side regarding this but I never took blame away from the shop, just that the OP needs to also be responsible for his lack of research before jumping into a job this big.

This is why big shops are still around doing quality work and Shifted wont be around much longer.

bussitcustoms · 04-11-2012, 12:48 PM

Quote:

Originally Posted by i need tires

hahahahahahahahahahahahahahahahahahahahahahahahhah a (ok my hands are tired)

I wasnt even talking about the OP... read please, I was talking about the rapper Drake. Please read before you get all billy badass with the "report" button.

Youre still going to get Pinked for your homophobic slur.

i need tires · 04-11-2012, 12:49 PM

Quote:

Originally Posted by bussitcustoms

Youre still going to get Pinked for your homophobic slur.

Yea I figured, I saw it as being funny since Drake makes up stupid sayings but I guess not everyone see's it that way. Probably a Drake lover which is ok but all means.

delado · 04-11-2012, 12:53 PM

Quote:

Originally Posted by i need tires

hahahahahahahahahahahahahahahahahahahahahahahahhah a (ok my hands are tired)

I wasnt even talking about the OP... read please, I was talking about the rapper Drake. Please read before you get all billy badass with the "report" button.

It's pretty obvious I can read. Wish I could say the same about you.

i need tires · 04-11-2012, 12:57 PM

Quote:

Originally Posted by delado

It's pretty obvious I can read. Wish I could say the same about you.

yolo bro yolo!

Corbic · 04-11-2012, 01:01 PM

Quote:

Originally Posted by i need tires

This is why big shops are still around doing quality work and Shifted wont be around much longer.

Shifted wasn't even a Shop. It was a guy doing this crap in his spare time. He undoubtably had a full time job elsewhere ect.

$4,000 in labor is retarded cheap. DieselToyz charges $20,000 for a turnkey OEM Toyota 1KZ swap. Motor is only worth $3,000, so I'm sure that is about $15,000 in LABOR they are charging for and "OEM swap".

That's what you pay to get a shop with a staff, years of experience, quality facilities, equipment and is invested to the buiness so that they stand by their product.

This is also why you specialize. Travis should have had the motor built by an Engine shop with 2JZ experience.

FYI - Our local engine shop (domestic V8s) is 85 days out on work- they'll start it 85 days after you drop it off.

Then for the mounting - go to a fab shop , and lastly for wiring/tuning a professional wiring/tuner specialist.

I know of a few guys that do wiring out of work vans. You call up, they make an appointment, show up at your shop and by the end of the day, bamn! Full custom harness complete with $600-$2,000 bill.
.

i need tires · 04-11-2012, 01:03 PM

Quote:

Originally Posted by Corbic

Shifted wasn't even a Shop. It was a guy doing this crap in his spare time. He no doing had a full time job elsewhere ect.

$4,000 in labor is retarded cheap. DieselToyz charges $20,000 for a turnkey OEM Toyoat 1KZ swap. Motor is only worth $3,000, so in sure that is $15,000 in LABOR for and OEM swap.

That's what you pay to get a shop with a staff, years of experience, quality facilities, equipment and is invested to the buiness so that they stand by their product.

This is also why you specialize. Travis should have had the motor built by an Engine shop with 2JZ experience.

FYI - Our local engine shop (domestic V8s) is 85 days out on work- they'll start it 85 days after you drop it off.

Then for the mounting - go to a fab shop , and lastly for wiring/tuning a pfrosuonal wiring/tuner.

I know of a few guys that do wiring out of work vans. You call up, they make an appointment, show up at your shop and by the end of the day, bamn! Full custom harness complete with $600-$2,000 bill.
.

Thanks for clarifying that for me, I just read the title of the thread :/

But all your points are right on point!!!

RB180sxChris · 04-11-2012, 02:26 PM

Quote:

Originally Posted by i need tires

yolo bro yolo!

LMAO hahahahahaha......fucking drake

UNITEDMASTER · 04-11-2012, 05:56 PM

MAn soooo much bullshit chatter going on in here.. LOOK. IMHO . If you take your car to a shop & you tell them this is what I want,can you do it,& they say yes,then you pay them for said exspected work. Then if its not what you paid for & the work order say abccdefg was to be done & its not that seems like a problem to me ????? OR am I trippin?????? NOOWWW after you inspect said work & its complete chicken shit. In my book we now have a REAALLL big problem. YES or NO???

Now all this shit about the OPs DUI, that isnt nobodys business except his, no matter what your opinion may be,sure you can voice your opinion,fine,but who really gives a fuck. And as for another person to determine someone elses credibility online just blows my mind. As far as IM concerned if your not a judge,then who are you,nobody!!! On that aspect of things

So kill all that BS,& learn from his mistake,thats what the reveiws are for..... Have a great day & stay away from shifted performance.

DrIvEsldEwAyS · 04-11-2012, 06:02 PM

i know its been said but even if it was rushed and not road tested, the quality of the work is just plain SHIT. driving it down the road isnt going to fix how shitty of a job these so called mechanics did.

UNITEDMASTER · 04-11-2012, 06:14 PM

CORBIC- do you rep shifted performance,Im not sure....

Just come straight and say whatever it is your thinking,cause if you dont rep this shop,your either one nut swinging ass mofo,or you like making exscuses for other people.

If your the creator of that pile of dog shit,then just say ,Yea I built it,I took your money ,& fuck you Travis. I would personally have more respect for a mofo that came straight like that,cause then I would know exactly the kind of person Im dealing with.

To me there is no excuse for that kind of craftsmanship,or lack of!!!

KiLLeR2001 · 04-11-2012, 06:41 PM

Corbic is just playing devil's advocate, don't mind him. On some days he has good insight, but on most days he goes full derp (you never want to go full derp).

travismaser · 04-11-2012, 09:06 PM

posted by the mechanic doing the rebuild...

Well today I finished the tear down on the engine. (Please make sure your seat is in the upright and locked position)

Cyl. # 3 Rod bearing blown. beyond O.C. But thank god the crank isnt to bad off. A good polishing and it can be saved without being cut..

All rod bearing are over torqued. It took more then 110lbs to crack them loose. (Toyota specs are 22 ft lbs mark and go another 90 degrees)

While removing the cylinder head I found a EXTRA ARP 12pt nut & flat washer wedged in the oil return galley.

Also I had to remove the studs to take the head off for a couple reasons. Reason #1 3 studs would not come out of the head while unbolted. while loosing these studs they worked like screw jack and lifted the head off the block. Once off the block and on the bench I had to take a BFH (Big Frickin Hammer) and tap the studs out of the head. They must have over torqued them too and mushroomed the bolt holes in the head to pinch it to the studs. Reason # 2. Spray on gasket sealer on a M.L.S. metal gasket.

Now its time to start dropping parts in to the cleaning tanks, Machine shop time, and the dreaded waiting for parts to arrive.

Stay tuned.... More info to come..... Same Bat time...same bat channel.

travismaser · 04-11-2012, 09:14 PM

new pics too:

mess in the pan

yup...

manifod bolt (one of the only ones actually in it lol)

can you tell what bolt were missing??

my ARP flywheel bolts...that had zero lock tight on them

trans mount

bussitcustoms · 04-25-2012, 01:16 AM

any update?

travismaser · 04-25-2012, 04:35 AM

not really...everything is torn apart at the moment, waiting on parts...been painting odds and ends...getting ready for the re-build to take place....I need to start a new "My Toyota 350z RE-build" thread soon!

240sxbaltimoremd · 05-16-2012, 06:25 PM

I just read this whole thread and just needed to say that sucks so bad. I hope the new build goes good !!!

sdrmiami · 05-20-2012, 11:15 AM

this is so sad.... if that was my car id go back and shove that shifter up his ass !!! its people like that that give small shops andbig shops a bad name!!!

treken2t87 · 05-31-2012, 07:07 AM

Holy shit, this thread is like my worst nightmare. Good luck to the op getting everything fixed so he can finally enjoy what looks to be a fun car.

coreyh · 07-09-2012, 08:10 PM

honestly yea op you're not the innocent victim in this, thats been made clear, you should have done a little more research, whatever thats human error.

but this shops work is more than human error, this is just straight lazy. thats the best word i can think of honestly...i would be embarrased to have anything to do with this shop, hopefullt your re-build goes better.

travismaser · 07-09-2012, 08:34 PM

Quote:

Originally Posted by coreyh

honestly yea op you're not the innocent victim in this, thats been made clear, you should have done a little more research, whatever thats human error.

but this shops work is more than human error, this is just straight lazy. thats the best word i can think of honestly...i would be embarrased to have anything to do with this shop, hopefullt your re-build goes better.

the new build is almost complete!!! check out the video! WAY better than it was!!

Built 2jz 350z first drive - YouTube

89240sex · 07-18-2012, 06:54 AM

Glad to see it's finally coming together. That shift knob gave it away for me. Some people should just stick to swapping Honda's......

robarmour123 · 01-05-2013, 12:34 PM

Sorry to bring up an old thread. But can anyone get me Tony's number, or better yet shifted performances number. Tony burned me on 160$ + 30$ shipping on an nx cluster and has stopped replying to emails.

I paid him for an nx cluster wired for my s13. He shipped it, sent me a seat rail. I contacted him asap! And he said he must have gotten labels mixed up. So I instantly sent the seat rail to a Florida address he provided with him saying he would cover shipping charges. He said he is having the other person send me the cluster. After 2 weeks I told him I have received nothing. He told me he hasn't been able to get a reply from the guy. So I told him, I just want refunded. After about a week or more I finally received a PayPal notification about the refund. FOR 160, what happened to the shipping reimbursement? Anyways, the payment was pending for about 5 days, then I received a notification it had been declined by the senders bank. Cool! I've emailed him 1 time (the day the payment was declined by his bank) informing him the payment had been declined. Then 3 days later informing him this is rediculous, and it needs to be taken care of. Never did I become angry or offensive, just informed him I'd like my money back for the part and shipping. I even provided the tracking number and shipping receipt for the wrong part I had to send for him. 3 more days passed (that brings us to today) so I forwarded him the email that I sent earlier this week. This is completely rediculous.

If someone can please help me with a number or something to contact the shop or him directly that would be greatly appreciated. How can people be this unprofessional and still be doing business.

04-11-2012, 05:56 PM	#72
UNITEDMASTER Nissanaholic! Join Date: Apr 2006 Location: Anaheim Posts: 1,626 Trader Rating: (10) Feedback Score: 10 reviews	MAn soooo much bullshit chatter going on in here.. LOOK. IMHO . If you take your car to a shop & you tell them this is what I want,can you do it,& they say yes,then you pay them for said exspected work. Then if its not what you paid for & the work order say abccdefg was to be done & its not that seems like a problem to me ????? OR am I trippin?????? NOOWWW after you inspect said work & its complete chicken shit. In my book we now have a REAALLL big problem. YES or NO??? Now all this shit about the OPs DUI, that isnt nobodys business except his, no matter what your opinion may be,sure you can voice your opinion,fine,but who really gives a fuck. And as for another person to determine someone elses credibility online just blows my mind. As far as IM concerned if your not a judge,then who are you,nobody!!! On that aspect of things So kill all that BS,& learn from his mistake,thats what the reveiws are for..... Have a great day & stay away from shifted performance. __________________ MR JACKSON.

04-11-2012, 06:02 PM	#73
DrIvEsldEwAyS Zilvia Junkie Join Date: Apr 2005 Location: Columbia,SC Age: 32 Posts: 351 Trader Rating: (0) Feedback Score: 0 reviews	i know its been said but even if it was rushed and not road tested, the quality of the work is just plain SHIT. driving it down the road isnt going to fix how shitty of a job these so called mechanics did. __________________ -1990 240sx hatch sr20det- gt35r, blah blah blah

04-11-2012, 06:14 PM	#74
UNITEDMASTER Nissanaholic! Join Date: Apr 2006 Location: Anaheim Posts: 1,626 Trader Rating: (10) Feedback Score: 10 reviews	CORBIC- do you rep shifted performance,Im not sure.... Just come straight and say whatever it is your thinking,cause if you dont rep this shop,your either one nut swinging ass mofo,or you like making exscuses for other people. If your the creator of that pile of dog shit,then just say ,Yea I built it,I took your money ,& fuck you Travis. I would personally have more respect for a mofo that came straight like that,cause then I would know exactly the kind of person Im dealing with. To me there is no excuse for that kind of craftsmanship,or lack of!!! __________________ MR JACKSON.

04-11-2012, 06:41 PM	#75
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	Corbic is just playing devil's advocate, don't mind him. On some days he has good insight, but on most days he goes full derp (you never want to go full derp). __________________

04-11-2012, 09:06 PM	#76
travismaser Zilvia Member Join Date: Sep 2010 Location: pittsburgh Age: 35 Posts: 156 Trader Rating: (0) Feedback Score: 0 reviews	posted by the mechanic doing the rebuild... Well today I finished the tear down on the engine. (Please make sure your seat is in the upright and locked position) Cyl. # 3 Rod bearing blown. beyond O.C. But thank god the crank isnt to bad off. A good polishing and it can be saved without being cut.. All rod bearing are over torqued. It took more then 110lbs to crack them loose. (Toyota specs are 22 ft lbs mark and go another 90 degrees) While removing the cylinder head I found a EXTRA ARP 12pt nut & flat washer wedged in the oil return galley. Also I had to remove the studs to take the head off for a couple reasons. Reason #1 3 studs would not come out of the head while unbolted. while loosing these studs they worked like screw jack and lifted the head off the block. Once off the block and on the bench I had to take a BFH (Big Frickin Hammer) and tap the studs out of the head. They must have over torqued them too and mushroomed the bolt holes in the head to pinch it to the studs. Reason # 2. Spray on gasket sealer on a M.L.S. metal gasket. Now its time to start dropping parts in to the cleaning tanks, Machine shop time, and the dreaded waiting for parts to arrive. Stay tuned.... More info to come..... Same Bat time...same bat channel. __________________ -__- 2jz 350Z -__- NSN Garage

04-11-2012, 09:14 PM	#77
travismaser Zilvia Member Join Date: Sep 2010 Location: pittsburgh Age: 35 Posts: 156 Trader Rating: (0) Feedback Score: 0 reviews	new pics too: mess in the pan yup... manifod bolt (one of the only ones actually in it lol) can you tell what bolt were missing?? my ARP flywheel bolts...that had zero lock tight on them trans mount __________________ -__- 2jz 350Z -__- NSN Garage

04-25-2012, 01:16 AM	#78
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	any update?

04-25-2012, 04:35 AM	#79
travismaser Zilvia Member Join Date: Sep 2010 Location: pittsburgh Age: 35 Posts: 156 Trader Rating: (0) Feedback Score: 0 reviews	not really...everything is torn apart at the moment, waiting on parts...been painting odds and ends...getting ready for the re-build to take place....I need to start a new "My Toyota 350z RE-build" thread soon! __________________ -__- 2jz 350Z -__- NSN Garage

05-16-2012, 06:25 PM	#80
240sxbaltimoremd Leaky Injector Join Date: Aug 2011 Location: baltimore, md Posts: 89 Trader Rating: (0) Feedback Score: 0 reviews	I just read this whole thread and just needed to say that sucks so bad. I hope the new build goes good !!!

05-20-2012, 11:15 AM	#81
sdrmiami Zilvia Junkie Join Date: Nov 2008 Location: Miami Fl Age: 43 Posts: 518 Trader Rating: (10) Feedback Score: 10 reviews	this is so sad.... if that was my car id go back and shove that shifter up his ass !!! its people like that that give small shops andbig shops a bad name!!! __________________ Team SDR! 305.992.1514 800hp SR20DET powered 240sx... Full street trim!

05-31-2012, 07:07 AM	#82
treken2t87 Zilvia Junkie Join Date: Apr 2008 Location: Indianapolis, IN Age: 34 Posts: 337 Trader Rating: (4) Feedback Score: 4 reviews	Holy shit, this thread is like my worst nightmare. Good luck to the op getting everything fixed so he can finally enjoy what looks to be a fun car. __________________

07-09-2012, 08:10 PM	#83
coreyh Leaky Injector Join Date: Jul 2011 Location: covina, CA Age: 27 Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	honestly yea op you're not the innocent victim in this, thats been made clear, you should have done a little more research, whatever thats human error. but this shops work is more than human error, this is just straight lazy. thats the best word i can think of honestly...i would be embarrased to have anything to do with this shop, hopefullt your re-build goes better.

07-18-2012, 06:54 AM	#85
89240sex Zilvia Member Join Date: Feb 2011 Location: maryland 301 Age: 28 Posts: 236 Trader Rating: (1) Feedback Score: 1 reviews	Glad to see it's finally coming together. That shift knob gave it away for me. Some people should just stick to swapping Honda's...... __________________ Cookie Kouki.

01-05-2013, 12:34 PM	#86
robarmour123 Leaky Injector Join Date: Dec 2011 Location: Raleigh North Carolina/ohio Age: 30 Posts: 78 Trader Rating: (1) Feedback Score: 1 reviews	Sorry to bring up an old thread. But can anyone get me Tony's number, or better yet shifted performances number. Tony burned me on 160$ + 30$ shipping on an nx cluster and has stopped replying to emails. I paid him for an nx cluster wired for my s13. He shipped it, sent me a seat rail. I contacted him asap! And he said he must have gotten labels mixed up. So I instantly sent the seat rail to a Florida address he provided with him saying he would cover shipping charges. He said he is having the other person send me the cluster. After 2 weeks I told him I have received nothing. He told me he hasn't been able to get a reply from the guy. So I told him, I just want refunded. After about a week or more I finally received a PayPal notification about the refund. FOR 160, what happened to the shipping reimbursement? Anyways, the payment was pending for about 5 days, then I received a notification it had been declined by the senders bank. Cool! I've emailed him 1 time (the day the payment was declined by his bank) informing him the payment had been declined. Then 3 days later informing him this is rediculous, and it needs to be taken care of. Never did I become angry or offensive, just informed him I'd like my money back for the part and shipping. I even provided the tracking number and shipping receipt for the wrong part I had to send for him. 3 more days passed (that brings us to today) so I forwarded him the email that I sent earlier this week. This is completely rediculous. If someone can please help me with a number or something to contact the shop or him directly that would be greatly appreciated. How can people be this unprofessional and still be doing business.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode