|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
 |
|
|
Thread Tools | Display Modes |
03-07-2014, 07:30 AM
|
#1 |
|
Zilvia Addict
 
Join Date: Oct 2007
Location: Montreal , Canada
Age: 35
Posts: 817
Trader Rating: (1)
  Feedback Score: 1 reviews
|
Need info OS Giken ts2bd sr20det
I have a OS Giken twin plate for my sr20vet that i bought use but rebuilt !!!
the ex owner machined the clutch plates and flywheel to bring them back to new but i dont think i lowered the mounting surface of the casing **where friction discs and the clutch plates goes** too match what he took off from the clutch plates / flywheel and retain the same claimping force ! My question: Its there a mesurement out there or i need to installe the clutch and see if it slip !?!?!? Or maybe a visual inspection of the clutch cover / pressure plate can indicate its ok or not
__________________
AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574 Last edited by rbs14kouki; 03-07-2014 at 07:47 PM.. |
|
|
| Sponsored Links |
|
03-07-2014, 09:13 PM
|
#2 |
|
Man w/ CTSV & a Car Seat
 
|
Nothing you can really do but to put it on and see if it slips. Or you can buy a rebuild kit for it for about $800 for the peace of mind.
I have 2 of this clutch kit. One needs a rebuilt and another that I'm using now on my RB25, that was originially on my SR20. If you do get a rebuild kit, make sure you specify that it is a TS2BD, not a TS2B. The cage is thinner/shorter on the non-dampened TS2B. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
