help with wheel offset please!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rb20deterror · 03-29-2009, 09:16 PM

i have an 89 240sx. i have a set of sportmax 002 16x8 wheels. fronts are +38 offset with a 205/50/16 ecsta tire. the rear is a 16x8 +0 offset with 205/45/16 nitto neo gens. will this setup slam my fender? i went with the 205 in the rear so the tire would roll a bit and with coilovers on and the right camber i was hoping it would tuck. the car has the stock suspension now until i complete my rb swap and i was seeing what anyone would recommend. thanks,

dave

Mister.E · 03-29-2009, 10:33 PM

im pretty sure you are gonna be fine bro. people run these same exact wheels all the time. im sure the topic has been discussed a million times

you can try here: http://zilvia.net/f/chat/129865-whee...tch-flush.html

nsn240 · 03-29-2009, 11:26 PM

Fronts are gonna be sunk, rears are ok - what suspension do you have?

Best place for all your answers:
http://zilvia.net/f/chat/129865-whee...h-flush-1.html

rb20deterror · 03-30-2009, 05:45 PM

i am running the factory suspension now. once my rb swap is done, i will install the tein sideways master coilovers.

cc4usmc · 03-30-2009, 05:47 PM

http://zilvia.net/f/chat/129865-whee...h-flush-1.html

Just for good measure.

03-29-2009, 09:16 PM	#1
rb20deterror Leaky Injector Join Date: Feb 2009 Location: baltimore Age: 35 Posts: 70 Trader Rating: (0) Feedback Score: 0 reviews	help with wheel offset please!!! i have an 89 240sx. i have a set of sportmax 002 16x8 wheels. fronts are +38 offset with a 205/50/16 ecsta tire. the rear is a 16x8 +0 offset with 205/45/16 nitto neo gens. will this setup slam my fender? i went with the 205 in the rear so the tire would roll a bit and with coilovers on and the right camber i was hoping it would tuck. the car has the stock suspension now until i complete my rb swap and i was seeing what anyone would recommend. thanks, dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-29-2009, 10:33 PM	#2
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 36 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	im pretty sure you are gonna be fine bro. people run these same exact wheels all the time. im sure the topic has been discussed a million times you can try here: http://zilvia.net/f/chat/129865-whee...tch-flush.html

03-29-2009, 11:26 PM	#3
nsn240 Zilvia Addict Join Date: Aug 2005 Location: pa Posts: 641 Trader Rating: (1) Feedback Score: 1 reviews	Fronts are gonna be sunk, rears are ok - what suspension do you have? Best place for all your answers: http://zilvia.net/f/chat/129865-whee...h-flush-1.html

03-30-2009, 05:45 PM	#4
rb20deterror Leaky Injector Join Date: Feb 2009 Location: baltimore Age: 35 Posts: 70 Trader Rating: (0) Feedback Score: 0 reviews	i am running the factory suspension now. once my rb swap is done, i will install the tein sideways master coilovers.