ghetto ebay FMIC kit has no brackets, I got 3 questions - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*handinpants* · 03-04-2008, 10:44 PM

okay, this is a 3 part question so i bought afmic kit from this shop on durfee road here in LA (i'm not advertising anything) and they provided no brackets to hang the intercooler, so now i am left to make them myself, off to home depot i go, only I know what i should use, but i don't know what to call them other than metal bracket things... 1. does anyone have any experience with this?
2. How the hell to i remove the s13 front bumper, where are all the bolts, and are there some hidden behind the fenders.
3. my intercooler is 31" x 9" x 3, do i have to remove the bumper support bar? ( i don't want to)

SDS13COUPE · 03-04-2008, 11:50 PM

For the bumper if I remember off the top of my head there are
- There are 4 or 5 nuts on the fender each side
- 2 on each headlight brackets
- The bumper reinforcement brackets under the car
- 1 bolt/1 nut for the crash bar ( you will most likely have to remove it from the bumper to fit the intercooler) I think that's all of them. As far as the IC brackets your best bet is to take it to a shop and fab it. GL.

ecuastyle84 · 03-05-2008, 08:35 AM

or you can have the bumper support cut to fit the fmic without actually removing it

***S14DB*** · 03-05-2008, 09:14 AM

You want L brackets.

sac · 03-05-2008, 10:24 PM

deffinately keep the crash bar.. you will regret it if ya get into a 10mph crash and rip out the front half of your car instead of just bending that bar..(i know from experience

)
but i agree take the i.c. to a fab shop, or a body shop. you can put your brackets where ya need to. mark it off with a marker, or use like a hot glue gun to hold shit in place for a lil bit till ya can get it welded.

03-04-2008, 10:44 PM	#1
handinpants FreshColdBeer.com Join Date: Feb 2008 Location: California Age: 38 Posts: 2,665 Trader Rating: (48) Rides Gallery: handinpants Feedback Score: 48 reviews	ghetto ebay FMIC kit has no brackets, I got 3 questions okay, this is a 3 part question so i bought afmic kit from this shop on durfee road here in LA (i'm not advertising anything) and they provided no brackets to hang the intercooler, so now i am left to make them myself, off to home depot i go, only I know what i should use, but i don't know what to call them other than metal bracket things... 1. does anyone have any experience with this? 2. How the hell to i remove the s13 front bumper, where are all the bolts, and are there some hidden behind the fenders. 3. my intercooler is 31" x 9" x 3, do i have to remove the bumper support bar? ( i don't want to)

03-05-2008, 08:35 AM	#3
ecuastyle84 Zilvia Junkie Join Date: Mar 2005 Location: New Jersey Posts: 552 Trader Rating: (1) Rides Gallery: ecuastyle84 Feedback Score: 1 reviews	or you can have the bumper support cut to fit the fmic without actually removing it __________________ *FS: S13 FULL PARTOUT...LOTS OF GOODIES!!!*

03-05-2008, 09:14 AM	#4
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	You want L brackets. __________________ Comments should be taken as Opinions not as Statements of Fact

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-04-2008, 11:50 PM	#2
SDS13COUPE Zilvia FREAK! Join Date: May 2006 Location: San Diego Age: 35 Posts: 1,402 Trader Rating: (19) Feedback Score: 19 reviews	For the bumper if I remember off the top of my head there are - There are 4 or 5 nuts on the fender each side - 2 on each headlight brackets - The bumper reinforcement brackets under the car - 1 bolt/1 nut for the crash bar ( you will most likely have to remove it from the bumper to fit the intercooler) I think that's all of them. As far as the IC brackets your best bet is to take it to a shop and fab it. GL.

03-05-2008, 10:24 PM	#5
sac Zilvia Addict Join Date: Feb 2008 Location: The SLC, Utah Age: 36 Posts: 794 Trader Rating: (3) Feedback Score: 3 reviews	deffinately keep the crash bar.. you will regret it if ya get into a 10mph crash and rip out the front half of your car instead of just bending that bar..(i know from experience ) but i agree take the i.c. to a fab shop, or a body shop. you can put your brackets where ya need to. mark it off with a marker, or use like a hot glue gun to hold shit in place for a lil bit till ya can get it welded.