|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
10-07-2016, 10:04 PM | #1 |
Sr20 redtop clutch sticking to floor
Have been having troubles with the clutch sticking to the floor, replaced the master, slave and the line from the master to slave was replaced with a chase bays one . Just greased the spring under the pedal and still after about 5-10 minutes of driving the clutch with start sticking to the floor again. When the car isn't driving and just at a stand still it won't stick, only after a few minutes of driving I'll go shift and it will stick. any help will be greatly appreciated .
|
|
Sponsored Links |
10-08-2016, 08:49 PM | #3 |
Nissanaholic!
Join Date: Feb 2012
Location: someone's sisters' pants
Posts: 2,288
Trader Rating: (37)
Feedback Score: 37 reviews
|
Sounds like you're boiling your fluid in the line somewheres. Does your brake peddle feel a lot softer when you're experiencing this issue w/ the clutch?
__________________
I like my bikes how I like my b¡tches...naked! 2014 Triumph Street Triple |
10-12-2016, 11:57 PM | #4 |
I didn't notice anything while it happened, I was driving after replacing the mast and slave, and the line from the master to the slave. Drove good for about 5 minutes and it started sticking, then shortly after stuck right to the floor. Had to brake and pull over and I didn't notice the breaks, but I also wasn't paying much attention to.
|
|
10-13-2016, 06:01 PM | #5 |
Nissanaholic!
Join Date: Feb 2012
Location: someone's sisters' pants
Posts: 2,288
Trader Rating: (37)
Feedback Score: 37 reviews
|
With the car off, will it stick to the floor after pumping it a couple of times or whatnot?
__________________
I like my bikes how I like my b¡tches...naked! 2014 Triumph Street Triple |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|