Help! S13 FLCA Bolt Won't Budge - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zue · 04-27-2012, 09:00 PM

I've replaced my FLCA on my S13 once before. I don't care about the control arm that is on there now because I have a new arm with new joints. I disconnected the tension rod, sway bar linkage, etc. I tapped the side of the steering knuckle, no luck. I tried tapping the bolt, no luck. I even lubricated it with liquid wrench. I do not know what to try next. And by tap, I mean used a huge hammer and went to work, and had no luck. If anybody can shed any light, much appreciated.

Silvia716 · 04-27-2012, 11:13 PM

Pb buster, impact gun, and a torch if worse comes to worse drill it out and get a new bolt

apex · 04-28-2012, 04:59 AM

pickle fork

DennisC · 04-28-2012, 12:48 PM

Quote:

Originally Posted by apex

pickle fork

This ^
Msglength

Carbomb · 04-28-2012, 05:50 AM

cut the bolt on each side and slip it out the subframe I just did it to a zx

cmg · 04-29-2012, 12:15 AM

Quote:

Originally Posted by Zue

I've replaced my FLCA on my S13 once before. I don't care about the control arm that is on there now because I have a new arm with new joints. I disconnected the tension rod, sway bar linkage, etc. I tapped the side of the steering knuckle, no luck. I tried tapping the bolt, no luck. I even lubricated it with liquid wrench. I do not know what to try next. And by tap, I mean used a huge hammer and went to work, and had no luck. If anybody can shed any light, much appreciated.

Dont be a pussy. BFH and put a little heart into it.

Silvia716 · 04-29-2012, 03:56 AM

Quote:

Originally Posted by cmg

Dont be a pussy. BFH and put a little heart into it.

lmfao that allways works for me

04-27-2012, 09:00 PM	#1
Zue Leaky Injector Join Date: Nov 2010 Location: NorCal/Bay Area Posts: 127 Trader Rating: (5) Feedback Score: 5 reviews	Help! S13 FLCA Bolt Won't Budge I've replaced my FLCA on my S13 once before. I don't care about the control arm that is on there now because I have a new arm with new joints. I disconnected the tension rod, sway bar linkage, etc. I tapped the side of the steering knuckle, no luck. I tried tapping the bolt, no luck. I even lubricated it with liquid wrench. I do not know what to try next. And by tap, I mean used a huge hammer and went to work, and had no luck. If anybody can shed any light, much appreciated.

04-28-2012, 04:59 AM	#3
apex Zilvia FREAK! Join Date: Aug 2004 Location: palm springs Posts: 1,566 Trader Rating: (44) Feedback Score: 44 reviews	pickle fork __________________ Red Rocket

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-27-2012, 11:13 PM	#2
Silvia716 Zilvia Junkie Join Date: Aug 2010 Location: buffalo ny Posts: 302 Trader Rating: (1) Feedback Score: 1 reviews	Pb buster, impact gun, and a torch if worse comes to worse drill it out and get a new bolt

04-28-2012, 05:50 AM	#5
Carbomb Zilvia Junkie Join Date: Apr 2009 Location: USA Age: 33 Posts: 318 Trader Rating: (6) Feedback Score: 6 reviews	cut the bolt on each side and slip it out the subframe I just did it to a zx