E Brake wont Lock - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NismoS13Chuki · 03-28-2008, 11:48 AM

Ok guys so. I adjust my ebrake so that it will only travel 6-8 clicks with a firm pull like the manufacturer represents. So seeing as the car will see some drifting i decided to try a lock the rear wheels by ripping the ebrake the wheels didnt lock. Just came to a slow stop. The rear pads are good and im pretty sure that the caliper is too. Also i get a weird grinding noise in reverse from the brakes and two hard clicks in forward while pressing the brakes after the car has been sitting for a while. Can anybody give me some help

JP180SX · 03-28-2008, 05:24 PM

Loosen your ebrake just enough so the pads aren't dragging the rotors, push the clutch in before ripping the ebrake.

NismoS13Chuki · 03-28-2008, 07:16 PM

Quote:

Originally Posted by JP180SX

Loosen your ebrake just enough so the pads aren't dragging the rotors, push the clutch in before ripping the ebrake.

first its auto and second the ebrake was way loose before and nothng happened. i tightened it up slowly and tested with little improvement

BlckBeautyVTEC · 03-28-2008, 07:36 PM

your cable is prob stretched like mine it sucks, get a hyrdo e brake

NismoS13Chuki · 03-28-2008, 07:42 PM

is it difficult to replace the cables because i dont have the money for a hydro set up

03-28-2008, 11:48 AM	#1
NismoS13Chuki Leaky Injector Join Date: Mar 2008 Location: Delray Beach, FL Posts: 105 Trader Rating: (1) Feedback Score: 1 reviews	E Brake wont Lock Ok guys so. I adjust my ebrake so that it will only travel 6-8 clicks with a firm pull like the manufacturer represents. So seeing as the car will see some drifting i decided to try a lock the rear wheels by ripping the ebrake the wheels didnt lock. Just came to a slow stop. The rear pads are good and im pretty sure that the caliper is too. Also i get a weird grinding noise in reverse from the brakes and two hard clicks in forward while pressing the brakes after the car has been sitting for a while. Can anybody give me some help

03-28-2008, 07:36 PM	#4
BlckBeautyVTEC Zilvia Addict Join Date: Feb 2005 Location: San Diego Age: 35 Posts: 678 Trader Rating: (3) Feedback Score: 3 reviews	your cable is prob stretched like mine it sucks, get a hyrdo e brake __________________ poop mama...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-28-2008, 05:24 PM	#2
JP180SX Join Date: May 2007 Location: Okinawa, Japan Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Loosen your ebrake just enough so the pads aren't dragging the rotors, push the clutch in before ripping the ebrake.

03-28-2008, 07:42 PM	#5
NismoS13Chuki Leaky Injector Join Date: Mar 2008 Location: Delray Beach, FL Posts: 105 Trader Rating: (1) Feedback Score: 1 reviews	is it difficult to replace the cables because i dont have the money for a hydro set up