Early 180sx (1992), Kouki conversion. Quick question or two - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

spitefulcheerio · 03-27-2019, 04:20 PM

Hey guys, I have a 92 180sx that I love and I've been wanting to switch up to the kouki front fascia. I'm willing to buy anything I need to make it fit and sit right but from everything I'm reading, people are only talking about needing a different support on USDM cars with no 100% concrete anything I've found about JDM cars.

Does anyone have any insight into which parts I need and which parts I can skip? Already have the bumper, turn signals, and "fog lights"/bumper lights ready to go...just want to know which supports I need and which ones I already have (if any)

Thank you very much ahead of time

dizzariot · 03-27-2019, 05:33 PM

I smell blood in the water. This is going to be good.

Inb4 the "I swear I looked" is debunked.

spitefulcheerio · 03-27-2019, 06:26 PM

Quote:

Originally Posted by dizzariot

I smell blood in the water. This is going to be good.

Inb4 the "I swear I looked" is debunked.

It's okay, I have thick skin.

fallen_51 · 03-27-2019, 07:08 PM

Quote:

Originally Posted by dizzariot

I smell blood in the water. This is going to be good.

Inb4 the "I swear I looked" is debunked.

He is from Florida also. It keeps getting better.

***dorkidori_s13*** · 03-27-2019, 07:12 PM

i make the front lip and fender extensions in urethane (both are in stock). i also produce the skirts and rear valances in FRP. all parts fit like OEM... if youd like to take a look at what i produce, visit my website.

buy a bash bar from StreetFaction and call it a day. im not 100% sure if the OE bumper support will with the 180sx kouki front bumper (i think ours is slightly larger/longer)

you can utilize all of the internal brackets from the OE S13 chuki bumper and use them on your S13 kouki bumper outside of the outer fender brackets taht link the bumper to the fender extensions. you WILL need to use the core support brackets if you want to keep your bumper from sagging.

spitefulcheerio · 03-27-2019, 08:39 PM

Quote:

Originally Posted by fallen_51

He is from Florida also. It keeps getting better.

Maybe the fact that I’ve been here for almost a year with no posts would clue you in that I’ve lurked for plenty of answers to problems and found all my solutions without issue. I don’t bother posting trivial shit and wasting space...coming from the guy that’s been here since 2011 with 34 posts I figured the light bulb might kick on but hey I guess it’s cool to hate on the dude asking for help, right?

Green Arrow · 03-28-2019, 12:34 PM

Leave it to dorki to plug instead of moderating.

***dorkidori_s13*** · 03-28-2019, 02:50 PM

Quote:

Originally Posted by Green Arrow

Leave it to dorki to plug instead of moderating.

*slow clap*

i suggested my products to a guy looking to do his car up right... as well as offering advice about the potential issues with the front bumper support along with using his bumper brackets instead of having to rebuy them all

you decided to act like a troll and call me out instead of helping *thumbs up*

dizzariot · 03-28-2019, 09:10 PM

Quote:

Originally Posted by dorkidori_s13

*slow clap*

i suggested my products to a guy looking to do his car up right... as well as offering advice about the potential issues with the front bumper support along with using his bumper brackets instead of having to rebuy them all

you decided to act like a troll and call me out instead of helping *thumbs up*

...well yeah because this isn't in Tech Talk and doesn't need to be a thread. Come on, dude. He can go to the fucking Nissan website for answers. God forbid he emails them instead of making a pointless thread.

***dorkidori_s13*** · 03-28-2019, 11:34 PM

Quote:

Originally Posted by dizzariot

...well yeah because this isn't in Tech Talk and doesn't need to be a thread. Come on, dude. He can go to the fucking Nissan website for answers. God forbid he emails them instead of making a pointless thread.

ive seen WAY worse threads on zilvia thru the years...

soulessphoto · 03-29-2019, 06:15 AM

Quote:

Originally Posted by dorkidori_s13

ive seen WAY worse threads on zilvia thru the years...

WAY worse lol.

To the OP, get as many of the kouki brackets as you can if you want OEM type fitment. Yes you can modify some of the existing brackets as well, but if you got the money do it right.

spitefulcheerio · 03-29-2019, 09:22 AM

Quote:

Originally Posted by dizzariot

...well yeah because this isn't in Tech Talk and doesn't need to be a thread. Come on, dude. He can go to the fucking Nissan website for answers. God forbid he emails them instead of making a pointless thread.

While searching, I noticed a similar threads in this section (ones talking about 240s, not 180s) and figured this was an okay spot for it. My apologies on that.

But also, thanks for being an asshat

Quote:

Originally Posted by dorkidori_s13

*slow clap*

i suggested my products to a guy looking to do his car up right... as well as offering advice about the potential issues with the front bumper support along with using his bumper brackets instead of having to rebuy them all

you decided to act like a troll and call me out instead of helping *thumbs up*

Quote:

Originally Posted by soulessphoto

WAY worse lol.

To the OP, get as many of the kouki brackets as you can if you want OEM type fitment. Yes you can modify some of the existing brackets as well, but if you got the money do it right.

Thank you guys. Really appreciate the info. I have the money and will be buying all the proper brackets that I can find!

Jo_Galezo · 03-29-2019, 03:29 PM

Frsport sells 89% of the brackets.

Sent from my iPhone using Tapatalk

***dorkidori_s13*** · 03-29-2019, 04:11 PM

Z1 Motorsports has them as well

*brndck* · 03-29-2019, 04:57 PM

so..... buy the bumper support and brackets to match the bumper you have.

also, gasoline goes in the GAS TANK
air goes in the TIRES
blinker fluid goes in the BLINKERS

dizzariot · 03-29-2019, 06:34 PM

Quote:

Originally Posted by spitefulcheerio

While searching, I noticed a similar threads in this section (ones talking about 240s, not 180s) and figured this was an okay spot for it. My apologies on that.

But also, thanks for being an asshat

...dude you've got one guy clearly pandering to you to sell parts, another telling you the obvious (kouki model gets kouki brackets), and another person.

You could Google the answer in 5min flat. Who's the asshat.

Quote:

Originally Posted by brndck

so..... buy the bumper support and brackets to match the bumper you have.

also, gasoline goes in the GAS TANK
air goes in the TIRES
blinker fluid goes in the BLINKERS

+3845873457834753845734.

Yo guys do I need S14 kouki headlights for my S14 zenki bumper? I looked everywhere and it specifically says Silvia and not 240SX. I swear I looked.

fallen_51 · 03-30-2019, 03:32 AM

Quote:

Originally Posted by spitefulcheerio

*insert more crying here*

Show me on the doll where we hurt you.

If you cant figure this one out your gonna have a bad time.

Bishnasty · 03-30-2019, 07:56 AM

All 180sx and 240sx exterior is interchangeable, if it helps, I have 240sx vert doors on my 180sx, just had to unwire everything and swap over the door lock actuator, but yes there have been tons of write ups on all of this

spitefulcheerio · 03-30-2019, 08:54 AM

Quote:

Originally Posted by brndck

so..... buy the bumper support and brackets to match the bumper you have.

also, gasoline goes in the GAS TANK
air goes in the TIRES
blinker fluid goes in the BLINKERS

Quote:

Originally Posted by dizzariot

Who's the asshat.

To answer your question, you. Pretty clearly in fact. I got my answer tho and I'm all good now so all I'm doing is antagonizing you for the fun <3

Quote:

Originally Posted by fallen_51

Show me on the doll where we hurt you.

If you cant figure this one out your gonna have a bad time.

Oh trust I ain't hurt. Been on various forums for different cars for many, many years and there's always a few like you and the other dude. I appreciate the entertainment tho. Helped bring more attention to my thread by bumping it for me too so I guess I owe you one.

CamryOnBronze · 04-03-2019, 10:41 AM

OP I sent you a PM. Let me know if I can do anything to help.

spitefulcheerio · 04-05-2019, 11:38 AM

Quote:

Originally Posted by CamryOnBronze

OP I sent you a PM. Let me know if I can do anything to help.

I got it, really appreciate it homie. I think I got the bumper all figured out (found one for sale in GA with everything needed) but I'll message you if I come across anything else!

ixfxi · 04-06-2019, 10:10 PM

yeah, this hasnt been answered before....

https://zilvia.net/f/showthread.php?t=469265

dizzariot · 04-06-2019, 10:17 PM

Quote:

Originally Posted by ixfxi

yeah, this hasnt been answered before....

https://zilvia.net/f/showthread.php?t=469265

Don't bother, dude. You're a negative asshole by virtue of reminding the OP of that very fact.

ixfxi · 04-07-2019, 03:24 PM

damn, i thought i was a negative asshole by virtue of being a negative asshole

i'm slippin nowadays

***dorkidori_s13*** · 04-07-2019, 04:44 PM

think its time to close this thread....

03-27-2019, 04:20 PM	#1
spitefulcheerio Leaky Injector Join Date: Jul 2018 Location: Florida Posts: 73 Trader Rating: (2) Feedback Score: 2 reviews	Early 180sx (1992), Kouki conversion. Quick question or two Hey guys, I have a 92 180sx that I love and I've been wanting to switch up to the kouki front fascia. I'm willing to buy anything I need to make it fit and sit right but from everything I'm reading, people are only talking about needing a different support on USDM cars with no 100% concrete anything I've found about JDM cars. Does anyone have any insight into which parts I need and which parts I can skip? Already have the bumper, turn signals, and "fog lights"/bumper lights ready to go...just want to know which supports I need and which ones I already have (if any) Thank you very much ahead of time

03-27-2019, 05:33 PM	#2
dizzariot Post Whore! Join Date: May 2010 Location: Japan Posts: 5,126 Trader Rating: (47) Feedback Score: 47 reviews	I smell blood in the water. This is going to be good. Inb4 the "I swear I looked" is debunked. __________________ *The mark of a true sucka: 'RARE JDM' & 'OLD LOGO NISMO'*

03-27-2019, 07:12 PM	#5
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 39 Posts: 7,332 Trader Rating: (41) Feedback Score: 41 reviews	i make the front lip and fender extensions in urethane (both are in stock). i also produce the skirts and rear valances in FRP. all parts fit like OEM... if youd like to take a look at what i produce, visit my website. buy a bash bar from StreetFaction and call it a day. im not 100% sure if the OE bumper support will with the 180sx kouki front bumper (i think ours is slightly larger/longer) you can utilize all of the internal brackets from the OE S13 chuki bumper and use them on your S13 kouki bumper outside of the outer fender brackets taht link the bumper to the fender extensions. you WILL need to use the core support brackets if you want to keep your bumper from sagging. __________________ Bought something from me??? POST A REVIEW HERE!!!

03-29-2019, 04:11 PM	#14
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 39 Posts: 7,332 Trader Rating: (41) Feedback Score: 41 reviews	Z1 Motorsports has them as well __________________ Bought something from me??? POST A REVIEW HERE!!!

04-03-2019, 10:41 AM	#20
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 35 Posts: 3,913 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	OP I sent you a PM. Let me know if I can do anything to help. __________________ CamryOnBronze.com

03-28-2019, 12:34 PM	#7
Green Arrow BANNED Join Date: Dec 2015 Location: North Korea Posts: 349 Trader Rating: (0) Feedback Score: 0 reviews	Leave it to dorki to plug instead of moderating.

03-29-2019, 03:29 PM	#13
Jo_Galezo Zilvia Junkie Join Date: Sep 2017 Location: Manhattan Posts: 356 Trader Rating: (2) Feedback Score: 2 reviews	Frsport sells 89% of the brackets. Sent from my iPhone using Tapatalk

03-30-2019, 07:56 AM	#18
Bishnasty Join Date: Jul 2018 Location: Findlay Ohio Age: 23 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	All 180sx and 240sx exterior is interchangeable, if it helps, I have 240sx vert doors on my 180sx, just had to unwire everything and swap over the door lock actuator, but yes there have been tons of write ups on all of this

04-06-2019, 10:10 PM	#22
ixfxi Post Whore! Join Date: Apr 2006 Location: bangin on my chest Account: BANNED #fucksupreme Age: 79 Posts: 5,923 Trader Rating: (3) Feedback Score: 3 reviews	yeah, this hasnt been answered before.... https://zilvia.net/f/showthread.php?t=469265

04-07-2019, 03:24 PM	#24
ixfxi Post Whore! Join Date: Apr 2006 Location: bangin on my chest Account: BANNED #fucksupreme Age: 79 Posts: 5,923 Trader Rating: (3) Feedback Score: 3 reviews	damn, i thought i was a negative asshole by virtue of being a negative asshole i'm slippin nowadays

04-07-2019, 04:44 PM	#25
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 39 Posts: 7,332 Trader Rating: (41) Feedback Score: 41 reviews	think its time to close this thread.... __________________ Bought something from me??? POST A REVIEW HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode