Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-20-2014, 01:31 AM   #1
Ryan.maccie
Leaky Injector
 
Join Date: Nov 2007
Location: Richmond
Posts: 58
Trader Rating: (0)
Ryan.maccie is an unknown quantity at this point
Feedback Score: 0 reviews
S13 Vert, Sr20det, Power Fc, Wiring issue!

So Got my power Fc D-Jetro installed on an UNCUT sr harnes Previously running my sr20det with stock ECU.

Car would not start. No power to ECU, No Fuel, No spark.

Turns out the EGI Relay is not turning on.

I grounded the Red/Black Wire on the engine harness side of the chassis harness connection, and power FC will fire up and car will run.

I have power @ the EGI relay. So I am guesing my issue is on the ground side of the circuit. Where does the wire ground? what gives the relay the signal to switch?

I have searched Many times of people having this issue with the PFC, and alot of people seem to run a seperate relay for the power fc, But this causes issues with saving maps, If I can get it all to work oem, I would much rather that.

Thanks!
Ryan.maccie is offline   Reply With Quote
Sponsored Links
Old 03-20-2014, 08:04 AM   #2
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to fliprayzin240sx
Look up the wiring diagram for which ever SR20 you have. IIRC, there are 2 power wires on the harness that the PFC needs to have to work properly. The stock ECU only needs one of those 12v to work. I had the same issue with one of my SR, ended splicing the 12v source together and it worked on my last SR.
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™