Another SR Timing Question! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BiG MiKE86 · 06-30-2008, 01:49 PM

Sup guys me and a buddy were setting the timing on my SR over the weekend and we pretty much got it all lined up str8 but we started rotating it b4 we put in the CAS!?

And the crank bolt isnt in tight enough to back spin the engine and reset it - What can I do? Should I keep spinning the engine to line up the marks again - or can I just set it to TDC and put in the CAS...

Also there is a some slack on the chain between the cam gears at certain parts... wtf? how can I fix this?

Redtop SR20DET

drftmark · 06-30-2008, 02:06 PM

enthalpy has a timing setup info and what not.

http://www.rs-enthalpy.com/

go to tuning info, and scroll down to sr cam alignment procedure.

BiG MiKE86 · 06-30-2008, 05:19 PM

AWESOME! Thank You sir! + Rep for the awesome link!

*fliprayzin240sx* · 06-30-2008, 08:50 PM

Put back to TDC, hopefully the chain marks are where theyre supposed to be so you can sleep better at night. Putting the engine back in TDC is the only way to get the CAS set in properly.

BiG MiKE86 · 06-30-2008, 11:49 PM

So just set the block to 0deg TDC and the cams @ 10 o clock and 1230ish? and set the CAS? or do I have to line up the colored links again?

*fliprayzin240sx* · 07-01-2008, 05:10 PM

http://www.frsport.com/How-To-Set-Cr...gine_t_25.html

sidewaysil80 · 07-01-2008, 07:22 PM

so my computer is being homo and i cant open up the link for cam timing. after i set everything to tdc and got the teeth lined up am i supposed to rotate it until they line up with the special links again?

drftmark · 07-13-2008, 10:47 PM

no. It will take billions of turns to get them to line up correctly. Just click on my link I posted earlier about having 20 links in between the points and what not.

aNskY · 07-16-2008, 05:20 PM

Quote:

Originally Posted by sidewaysil80

so my computer is being homo and i cant open up the link for cam timing. after i set everything to tdc and got the teeth lined up am i supposed to rotate it until they line up with the special links again?

no you install the tensioner and just spin it twice to set the tension, you will end up back on tdc.

PhopsonNY · 07-23-2008, 09:36 AM

If you have slack in your chain... be careful.

Make sure the chain is sitting on the chain guide properly before you insert the tensioner... the slack should disappear once the tensioner releases.

Had a problem with this myself and my car would not start... could not get timing right.

Good luck

06-30-2008, 01:49 PM	#1
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Another SR Timing Question! Sup guys me and a buddy were setting the timing on my SR over the weekend and we pretty much got it all lined up str8 but we started rotating it b4 we put in the CAS!? And the crank bolt isnt in tight enough to back spin the engine and reset it - What can I do? Should I keep spinning the engine to line up the marks again - or can I just set it to TDC and put in the CAS... Also there is a some slack on the chain between the cam gears at certain parts... wtf? how can I fix this? Redtop SR20DET __________________

06-30-2008, 05:19 PM	#3
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	AWESOME! Thank You sir! + Rep for the awesome link! __________________

06-30-2008, 08:50 PM	#4
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Put back to TDC, hopefully the chain marks are where theyre supposed to be so you can sleep better at night. Putting the engine back in TDC is the only way to get the CAS set in properly. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

06-30-2008, 11:49 PM	#5
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	So just set the block to 0deg TDC and the cams @ 10 o clock and 1230ish? and set the CAS? or do I have to line up the colored links again? __________________

07-01-2008, 05:10 PM	#6
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	http://www.frsport.com/How-To-Set-Cr...gine_t_25.html __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

06-30-2008, 02:06 PM	#2
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	enthalpy has a timing setup info and what not. http://www.rs-enthalpy.com/ go to tuning info, and scroll down to sr cam alignment procedure.

07-01-2008, 07:22 PM	#7
sidewaysil80 Nissanaholic! Join Date: Jun 2008 Location: NoVA Age: 35 Posts: 1,710 Trader Rating: (23) Feedback Score: 23 reviews	so my computer is being homo and i cant open up the link for cam timing. after i set everything to tdc and got the teeth lined up am i supposed to rotate it until they line up with the special links again?

07-13-2008, 10:47 PM	#8
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	no. It will take billions of turns to get them to line up correctly. Just click on my link I posted earlier about having 20 links in between the points and what not.

07-23-2008, 09:36 AM	#10
PhopsonNY Leaky Injector Join Date: Nov 2003 Location: New York Posts: 149 Trader Rating: (0) Feedback Score: 0 reviews	If you have slack in your chain... be careful. Make sure the chain is sitting on the chain guide properly before you insert the tensioner... the slack should disappear once the tensioner releases. Had a problem with this myself and my car would not start... could not get timing right. Good luck __________________ Above!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode