Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 663 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1jzjoey · 10-27-2012, 12:36 AM

wtf happened to no specs no post

SleeKS13 · 10-27-2012, 09:05 AM

18x12-22 SSR

Breitling · 10-27-2012, 02:32 PM

RX7's breathing life into page 663! Very cool, loving post #19865!

Track Car Only. Fitment is conservative based on suspension travel. we cut about 3 inches out of the stock fender wells. Then, re welded the fenders and pounded the inside upwards

Again, its conservative at the start .... but the new coilovers haven't settled yet. 2 miles on them (Stance SS+).

18x11.5 +04

Flushladyz · 10-28-2012, 12:32 PM

ziptie · 10-28-2012, 04:15 PM

18 x 10 - 23
235/40/18
240z bolt on flares by topstage

ziptie · 10-28-2012, 04:25 PM

Side shot with the skidders on
ssr professors 18 x 11 - 7
245/40/18

The only recent one I have atm my car is looking pretty haggard (it was at a track day) I've torn down the front end and have a new aero bar on its way from Japan. I've bent something as the fronts were pretty flush before, so Im going to work that one out too.

Breitling · 10-28-2012, 05:26 PM

Quote:

Originally Posted by MidnightKouki

Hey these are the exact same specs as my wheels ('cept 19's out back) and I've been thinking about these overs. Is that the fitment with no spacers? Much camber? more pics?

Thanks!

No spacers and about 1.25 degrees of camber (minimal). tires are 265.35. I was worried that 50MM would be too small considering that the 20MM BMagics left the wheels in a "poke" state.

Here they are with 30mm BMagic (car is on the ground).
http://sphotos-a.xx.fbcdn.net/hphoto...28453660_n.jpg

Here they are with the Origin 2's
http://sphotos-b.xx.fbcdn.net/hphoto...49284508_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...15488510_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...69971809_n.jpg

MidnightKouki · 10-29-2012, 01:11 AM

^^^I think my mind is made up. thanks for the pics

current state.
18x10.5 -21
19x11.5 +4

goon bag · 10-29-2012, 04:39 PM

17x9+22 + 25mm spacer (effectively -3)F
17x10+8R
215 40 17 all round
panasport G7C5C

JonathanPrem · 10-29-2012, 08:35 PM

^OMG you are embrassing Canadians with that shit. I will try to recover his post

18x9.5 -6 running 20mm spacer to clear brembo -26 efftive
18x10.5 -6 et

Laotian240 · 10-30-2012, 12:36 AM

18x10
18x12.5

Just finished building my rims haven't measured the offset yet I'll get to that later. Just a few test fits need to adjust camber and ride height. Dunno if I should paint the car beige or keep it a red.

Redstar · 10-30-2012, 01:26 AM

18x10.5 +26mm
235/40/18 Falken FK452

tougefactory · 10-30-2012, 10:53 AM

Weds Maverick 210S, 20x9.5+24, 20x10, +24,

DeleriousZ · 10-30-2012, 02:40 PM

Quote:

Originally Posted by WakeBHR

I cant believe people are still making "just gotta do this and this and this" posts.
If it aint done. Dont post it. Simple shit people.

This. Gotta start handing out points or something for weak fucking posts. If it's not flush, don't post it!!

Repost for rules:

18x10.5+0 245/40
18x9.5-13 225/40

harangatang · 10-30-2012, 10:09 PM

No mas kouki, but I'll post what I've had for a few months now =P

On the way to Wekfest a few weeks back.. These are Work Gnosis GS2, 19x9.5-3 19x10.5-8

on the way back

Just got these on a week ago! Center caps weren't in yet
19x10-2 19x12-6 Riverside Trafficstars
Roll on the fronts only, like a 10-15mm pull on the rears.

gearhead55 · 10-31-2012, 12:16 AM

Quote:

Originally Posted by goon bag

17x9+22 + 25mm spacer (effectively -3)F
17x10+8R
215 40 17 all round
panasport G7C5C

this looks awesome. give us some side shots!

goon bag · 10-31-2012, 02:46 PM

cheers man,
this is about the only one I have at that height lol

sorta side on

nismobenzo · 10-31-2012, 03:41 PM

Quote:

Originally Posted by Javier13

drift car

the basic idea you are going for is soo fucking full of win!!!

oh..rulez

20×10 -3f 20×12 -10r

tayloray · 10-31-2012, 04:09 PM

My old coupe,
17x9 et-24 245-35
17x10 et-22 285-35

Porsche 951 days.

16x8
16x10
215's all the way around

S13Missle · 11-01-2012, 10:45 AM

Older
18x9.5/10.5 +20'ish (cant remember)

hypercrush · 11-02-2012, 10:36 AM

almost got these things tucking. so close

(18x10 +6 & 18x12 -14)

terrence · 11-02-2012, 11:48 AM

I don't know bout' them mirrors man.

edit: oops, this is wheel fitment thread;

18x10 +18; 225/40 17x9.5 -8, 215/40

Papi Sucio · 11-06-2012, 06:08 AM

I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

Pasini · 11-06-2012, 06:48 AM

my old rig. 25mm/50mm widebody.

Kreis in 18x10 -3 front / 18x11.5 -23 rear

(sorry about big picture)

Te37 · 11-06-2012, 07:23 AM

Quote:

Originally Posted by Papi Sucio

I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

Your baby needs a new owner.

Breitling · 11-06-2012, 10:42 AM

Quote:

Originally Posted by Te37

Your baby needs a new owner.

Answers like that are what helped zilvia develop the reputation that it currently has.

Breitling · 11-06-2012, 10:46 AM

Quote:

Originally Posted by Papi Sucio

I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

You may want to post your question in the fitment question thread. This thread is for pics of finished fitment. I believe the thread you are looking for may be helpful. Also, you might want to re-ask your questions with more clarity so that people know what you are asking specifically.

FEED · 11-06-2012, 12:14 PM

Quote:

Originally Posted by Breitling

Answers like that are what helped zilvia develop the reputation that it currently has.

People need to stop asking dumb questions and search for them, all the guys doing legit shit in here did their homework and put effort into it. Sure the guy might be new here, even new in the whole fitment thing... but unless he's blind, which I doubt since he's posting on here, he can sit down and scroll the pages, all the answers are there to be found.

Also, he wants replica, yet his username is TE37

Z33dori · 11-06-2012, 12:46 PM

Quote:

Originally Posted by Breitling

Answers like that are what helped zilvia develop the reputation that it currently has.

he has a point, if the lazy kid would just look there answers are blasted through out the thread over and over and over

and rimtuck.com link has been posted over and over and over

Quote:

Originally Posted by FEED

People need to stop asking dumb questions and search for them, all the guys doing legit shit in here did their homework and put effort into it. Sure the guy might be new here, even new in the whole fitment thing... but unless he's blind, which I doubt since he's posting on here, he can sit down and scroll the pages, all the answers are there to be found.

Also, he wants replica, yet his username is TE37

TE was responding not asking

xoxide · 11-06-2012, 01:15 PM

Quote:

Originally Posted by FEED

Also, he wants replica, yet his username is TE37

Canaduhhh yet another fail.

Papi Sucio asked, not TE37.

10-27-2012, 02:32 PM	#19863
Breitling Zilvia Junkie Join Date: Jan 2010 Location: Cols Age: 38 Posts: 586 Trader Rating: (6) Feedback Score: 6 reviews	RX7's breathing life into page 663! Very cool, loving post #19865! Track Car Only. Fitment is conservative based on suspension travel. we cut about 3 inches out of the stock fender wells. Then, re welded the fenders and pounded the inside upwards Again, its conservative at the start .... but the new coilovers haven't settled yet. 2 miles on them (Stance SS+). 18x11.5 +04 __________________ Ls460, 240sx, Super Avenger, Chronofighter, Navitimer

10-29-2012, 01:11 AM	#19868
MidnightKouki Zilvia Member Join Date: Jun 2011 Location: Vancouver, BC Posts: 227 Trader Rating: (0) Feedback Score: 0 reviews	^^^I think my mind is made up. thanks for the pics current state. 18x10.5 -21 19x11.5 +4 __________________ Instagram: @Yokosukanights

10-30-2012, 01:26 AM	#19872
Redstar Zilvia Member Join Date: Sep 2007 Location: California Age: 32 Posts: 281 Trader Rating: (3) Feedback Score: 3 reviews	18x10.5 +26mm 235/40/18 Falken FK452 __________________

10-30-2012, 10:53 AM	#19873
tougefactory Zilvia.net Advertiser Join Date: Oct 2003 Location: Chicago, IL Posts: 1,511 Trader Rating: (27) Feedback Score: 27 reviews	Weds Maverick 210S, 20x9.5+24, 20x10, +24, __________________ Performance Parts // Track Prep // Fabrication Follow us on Instagram @TFWorks For all the latest TF★ news visit our blog!!**

10-30-2012, 10:09 PM	#19875
harangatang Zilvia Addict Join Date: Apr 2007 Location: Dallas, Texas Age: 32 Posts: 931 Trader Rating: (9) Feedback Score: 9 reviews	No mas kouki, but I'll post what I've had for a few months now =P On the way to Wekfest a few weeks back.. These are Work Gnosis GS2, 19x9.5-3 19x10.5-8 on the way back Just got these on a week ago! Center caps weren't in yet 19x10-2 19x12-6 Riverside Trafficstars Roll on the fronts only, like a 10-15mm pull on the rears. __________________ Tyler

10-27-2012, 12:36 AM	#19861
1jzjoey Zilvia Junkie Join Date: Oct 2011 Location: San Diego, California Age: 29 Posts: 335 Trader Rating: (1) Feedback Score: 1 reviews	wtf happened to no specs no post

10-27-2012, 09:05 AM	#19862
SleeKS13 Leaky Injector Join Date: Mar 2010 Location: Edinburg, TX Posts: 74 Trader Rating: (3) Feedback Score: 3 reviews	18x12-22 SSR

10-28-2012, 12:32 PM	#19864
Flushladyz Leaky Injector Join Date: Apr 2010 Location: charlotte Age: 39 Posts: 66 Trader Rating: (0) Feedback Score: 0 reviews

10-28-2012, 04:15 PM	#19865
ziptie Leaky Injector Join Date: Jul 2010 Location: Melbourne, Australia Age: 30 Posts: 116 Trader Rating: (1) Feedback Score: 1 reviews	18 x 10 - 23 235/40/18 240z bolt on flares by topstage

10-28-2012, 04:25 PM	#19866
ziptie Leaky Injector Join Date: Jul 2010 Location: Melbourne, Australia Age: 30 Posts: 116 Trader Rating: (1) Feedback Score: 1 reviews	Side shot with the skidders on ssr professors 18 x 11 - 7 245/40/18 The only recent one I have atm my car is looking pretty haggard (it was at a track day) I've torn down the front end and have a new aero bar on its way from Japan. I've bent something as the fronts were pretty flush before, so Im going to work that one out too.

10-29-2012, 04:39 PM	#19869
goon bag Join Date: Sep 2010 Location: aus Age: 39 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	17x9+22 + 25mm spacer (effectively -3)F 17x10+8R 215 40 17 all round panasport G7C5C

10-29-2012, 08:35 PM	#19870
JonathanPrem Zilvia Addict Join Date: Sep 2010 Location: Toronto Ontario Posts: 729 Trader Rating: (9) Feedback Score: 9 reviews	^OMG you are embrassing Canadians with that shit. I will try to recover his post 18x9.5 -6 running 20mm spacer to clear brembo -26 efftive 18x10.5 -6 et

10-30-2012, 12:36 AM	#19871
Laotian240 Zilvia Member Join Date: Mar 2011 Location: ROWLAND HEIGHTS Posts: 259 Trader Rating: (7) Feedback Score: 7 reviews	18x10 18x12.5 Just finished building my rims haven't measured the offset yet I'll get to that later. Just a few test fits need to adjust camber and ride height. Dunno if I should paint the car beige or keep it a red.

10-31-2012, 02:46 PM	#19877
goon bag Join Date: Sep 2010 Location: aus Age: 39 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	cheers man, this is about the only one I have at that height lol sorta side on

10-31-2012, 04:09 PM	#19879
tayloray Zilvia Addict Join Date: Jan 2011 Location: Orlando, Florida Posts: 661 Trader Rating: (3) Feedback Score: 3 reviews	My old coupe, 17x9 et-24 245-35 17x10 et-22 285-35 Porsche 951 days. 16x8 16x10 215's all the way around __________________

11-01-2012, 10:45 AM	#19880
S13Missle Leaky Injector Join Date: Aug 2009 Location: Panama City, FL Age: 35 Posts: 63 Trader Rating: (3) Feedback Score: 3 reviews	Older 18x9.5/10.5 +20'ish (cant remember) __________________ Slip Gypsies

11-02-2012, 10:36 AM	#19881
hypercrush Zilvia Junkie Join Date: Jun 2010 Location: Phoenix AZ Age: 38 Posts: 377 Trader Rating: (0) Feedback Score: 0 reviews	almost got these things tucking. so close (18x10 +6 & 18x12 -14) __________________ www.elevenspaint.com

11-02-2012, 11:48 AM	#19882
terrence Zilvia Junkie Join Date: Feb 2008 Location: NC Age: 34 Posts: 571 Trader Rating: (1) Feedback Score: 1 reviews	I don't know bout' them mirrors man. edit: oops, this is wheel fitment thread; 18x10 +18; 225/40 17x9.5 -8, 215/40

11-06-2012, 06:08 AM	#19883
Papi Sucio Join Date: Sep 2012 Location: S.G.V./Pomona California Age: 30 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	I still don't understand, why have an offset? Do they increase performance in any way? I'm just asking cuz I need help in deciding what to get for my s13 coupe. I know that I want varrstoen v1 or similar but I'm unsure what size to get, offsets, how much I would have to stretch the fenders, spacers, and f I should switch to 5 lug or if I'm ok with what I currently have. Please help, my baby needs new shoes!

11-06-2012, 06:48 AM	#19884
Pasini Join Date: Feb 2011 Location: Perth WA, Australia Age: 33 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	my old rig. 25mm/50mm widebody. Kreis in 18x10 -3 front / 18x11.5 -23 rear (sorry about big picture)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode