Coucke_s15

Hello everyone, I desperately need some help. Every year I need to go to the vehicle inspection office with my car. Everything is fine with the car except the geometry. They checked the alignment and they said I can't drive my car anymore. The only thing different with my alignment and the alignment of the vehicle inspection office is the rear camber. I'm running - 2 degrees camber on the back whilst they say I can only run - 1degree55 on the back. The alignment they use is from an Australian Nissan S15 spec-s but I drive a Japanase S15 spec-r. I've already went to the tire shop for my alignment and they can' t get my camber less than - 2degrees and also said a spec-s and spec-r has a bit of a different suspension so the alignment normally should be different. My car is bone stock for the moment and I can't figure out what to do now. I already searched the internet for days and the only workshop manual I find is the Australian S15 workshop manual but it doesn't say if it's for a spec-s or spec-r or autech version. Can someone help me to get the JDM factory alignment settings for the S15 spec-r? The vehicle inspection office wants to ban my car from the road now because they also don't have the official geometry of the s15 spec-r alignment.
This car is my dream car since I was a littke kid and I really really don't want to sell it. Btw I live in Belgium... If someone could help me, this would mean the world to me!!!