Oil Dipstick w/ Top Mount SR20 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

speedfiend · 09-06-2016, 11:46 AM

Hey guys, I was wondering what you guys are doing about your oil dipstick when going top mount turbo on your sr20? In order to clear the manifold I had to kind of bend mine out and around the front side of the manifold. It works for the most part but it is a serious PITA to get the dipstick in and out of the tube. Plus, it is basically sitting up against my intake tube. FYI this is an s14 sr in an s14 with a hybrid dynamics top mount mani and 4 inch intake tube.

Was wondering if there is an aftermarket shorty tube you guys might be converting to. Or, maybe modifying the stock tube in some way. Let me know what you guys are doing so I can get some ideas on how to remedy this before I take the car in for a tune and start beating on it lol!
Thanx, Cameron

hanzbrady · 09-06-2016, 11:58 AM

I just bent mine to fit and dealt with the issues, but I'm sure if you wanted to go to a short style the air-cooled VW sticks are only about 8" long and could be made to fit

jedi03 · 09-06-2016, 04:29 PM

Do bend an different spot in engine bay! It's only metal!

1988montecarloss · 09-07-2016, 08:34 PM

Lokar makes flexible dipsticks, might be able to make one of those work

justinbyrant · 09-08-2016, 10:06 AM

I just removed mine, put it in a brake and fuel line tubing bender I modified to work with the bigger tube and gave it 2 bends, one at the bottom on at the top haven't had an issue with it

speedfiend · 09-08-2016, 04:09 PM

Thanx for the ideas guys.

I have mine bent now and it is functional for the most part. Its just a PITA to get the dipstick to go back in once you pull it out. Plus its just kinda sticking up and rubbing on my intake tube.

Im gonna check the size of a 350 chevy dipstick tube and see if it is similar in od to the sr20 one. If so then Ill prolly just buy a generic tube from summitt or somewhere and modify the dipstick to read the proper levels.
Cameron

derass · 09-08-2016, 05:09 PM

Quote:

Originally Posted by justinbyrant

...put it in a brake and fuel line tubing bender...

Such a great tool! Used it to delete the clutch damper, the line turned out perfect.

jr_ss · 09-08-2016, 06:12 PM

I did as you but bent mine to alleviate any binding that had occurred. Mine is clear of my intake tube by about .125". There is still a bit of binding but my Xterra dipstick has the same issue and its factory.

Sr20-Vert · 05-10-2018, 02:07 PM

Any one ever figure out a solution my stick gets super stuck this is third tube I tried hehe

Calver · 05-10-2018, 11:40 PM

Have you tried any generic tube like from Summit?

speedfiend · 05-12-2018, 07:40 PM

I ended up using an oem dipstick tube from my buddies 302 ford. The tube itself is a perfect fit and curves toward the front of the motor for very easy access. The dipstick itself I cut down and referenced off the oem sr20 dipstick for low and full lines and rescribed them. Hope this helps.
Cameron

Calver · 05-14-2018, 08:57 PM

Good tips, Cameron. This is a good future reference.

StuckeyOG · 07-27-2018, 12:32 AM

Quote:

Originally Posted by speedfiend

I ended up using an oem dipstick tube from my buddies 302 ford. The tube itself is a perfect fit and curves toward the front of the motor for very easy access. The dipstick itself I cut down and referenced off the oem sr20 dipstick for low and full lines and rescribed them. Hope this helps.
Cameron

Realize this thread is a few months old, but did you retain A/C and have to clear the compressor? That's currently the issue I'm having with my topmount KA24DE manifold.

Would you mind shooting me a picture of the dipstick tube placement on your engine if it's not too much of a hassle?

Thanks,
Matt

KoukiMonsta · 07-27-2018, 05:48 AM

Quote:

Originally Posted by StuckeyOG

Realize this thread is a few months old, but did you retain A/C and have to clear the compressor? That's currently the issue I'm having with my topmount KA24DE manifold.

Would you mind shooting me a picture of the dipstick tube placement on your engine if it's not too much of a hassle?

Thanks,
Matt

maybe this will help. I dont have AC, but I have my PS pump in AC comp location.

OEM SR tube, bent a little and mounting tab moved/re welded.

09-06-2016, 11:46 AM	#1
speedfiend Zilvia FREAK! Join Date: Feb 2002 Location: Destin, Fl./Houston, Tx. Age: 36 Posts: 1,190 Trader Rating: (66) Feedback Score: 66 reviews	Oil Dipstick w/ Top Mount SR20 Hey guys, I was wondering what you guys are doing about your oil dipstick when going top mount turbo on your sr20? In order to clear the manifold I had to kind of bend mine out and around the front side of the manifold. It works for the most part but it is a serious PITA to get the dipstick in and out of the tube. Plus, it is basically sitting up against my intake tube. FYI this is an s14 sr in an s14 with a hybrid dynamics top mount mani and 4 inch intake tube. Was wondering if there is an aftermarket shorty tube you guys might be converting to. Or, maybe modifying the stock tube in some way. Let me know what you guys are doing so I can get some ideas on how to remedy this before I take the car in for a tune and start beating on it lol! Thanx, Cameron

09-06-2016, 11:58 AM	#2
hanzbrady Zilvia FREAK! Join Date: Apr 2015 Location: Floriduh Posts: 1,168 Trader Rating: (4) Feedback Score: 4 reviews	I just bent mine to fit and dealt with the issues, but I'm sure if you wanted to go to a short style the air-cooled VW sticks are only about 8" long and could be made to fit __________________ [email protected]

09-07-2016, 08:34 PM	#4
1988montecarloss Nissanaholic! Join Date: Jun 2012 Location: old el paso Age: 28 Posts: 1,979 Trader Rating: (24) Feedback Score: 24 reviews	Lokar makes flexible dipsticks, might be able to make one of those work __________________ IG: @Haley72692

09-08-2016, 06:12 PM	#8
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,054 Trader Rating: (34) Feedback Score: 34 reviews	I did as you but bent mine to alleviate any binding that had occurred. Mine is clear of my intake tube by about .125". There is still a bit of binding but my Xterra dipstick has the same issue and its factory. __________________ My SR20VET

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-06-2016, 04:29 PM	#3
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,786 Trader Rating: (8) Feedback Score: 8 reviews	Do bend an different spot in engine bay! It's only metal!

09-08-2016, 10:06 AM	#5
justinbyrant Zilvia Member Join Date: May 2011 Location: eugene Age: 29 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	I just removed mine, put it in a brake and fuel line tubing bender I modified to work with the bigger tube and gave it 2 bends, one at the bottom on at the top haven't had an issue with it

09-08-2016, 04:09 PM	#6
speedfiend Zilvia FREAK! Join Date: Feb 2002 Location: Destin, Fl./Houston, Tx. Age: 36 Posts: 1,190 Trader Rating: (66) Feedback Score: 66 reviews	Thanx for the ideas guys. I have mine bent now and it is functional for the most part. Its just a PITA to get the dipstick to go back in once you pull it out. Plus its just kinda sticking up and rubbing on my intake tube. Im gonna check the size of a 350 chevy dipstick tube and see if it is similar in od to the sr20 one. If so then Ill prolly just buy a generic tube from summitt or somewhere and modify the dipstick to read the proper levels. Cameron

05-10-2018, 02:07 PM	#9
Sr20-Vert Leaky Injector Join Date: Mar 2011 Location: hollywood Age: 35 Posts: 136 Trader Rating: (1) Feedback Score: 1 reviews	Any one ever figure out a solution my stick gets super stuck this is third tube I tried hehe

05-10-2018, 11:40 PM	#10
Calver BANNED Join Date: May 2018 Location: GA Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	Have you tried any generic tube like from Summit?

05-12-2018, 07:40 PM	#11
speedfiend Zilvia FREAK! Join Date: Feb 2002 Location: Destin, Fl./Houston, Tx. Age: 36 Posts: 1,190 Trader Rating: (66) Feedback Score: 66 reviews	I ended up using an oem dipstick tube from my buddies 302 ford. The tube itself is a perfect fit and curves toward the front of the motor for very easy access. The dipstick itself I cut down and referenced off the oem sr20 dipstick for low and full lines and rescribed them. Hope this helps. Cameron

05-14-2018, 08:57 PM	#12
Calver BANNED Join Date: May 2018 Location: GA Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	Good tips, Cameron. This is a good future reference.