Albert_Trd

thanks!. Ya I get Pms almost everyday about it. Once I finish this project and the Mkiv supra in my garage. Ill get back on it. Not enough hours in the day.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Apex Eight

Sick build so far. Subbed. Also, what BOV is on your Supra? Sounds sweet

Albert_Trd

Tial q 50mm

Same one my Brother bought. They sound different at low psi vs high psi tho for sure.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Albert_Trd

Hotside Intercooler mocked up and tacked 1-piece

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

AzS13hatch

Really clean piping so far man. I wish I wouldn't have rushed my car towards the end and took more pics. Also jealous of the non TRC throttle body, I need one.

Albert_Trd

Yeah, been there done that, and I always find my self re-pulling engines and redoing setups later down the road.

hell, even the engine here is gonna be pulled one last final time. Need to make small adjustments. Smooth out the upper radiator support, weld in nuts on the back side so the radiator support brackets bolt it like factory, paint the engine bay, etc etc. Hopefully all said and done he can have one of the cleaner, OEM looking setups. Fit, Form, and function.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

AzS13hatch

Props man. I would most likely still be working on mine if it weren't for having to get stationed in Korea for a year. I wanted the car to move under its own power before I left to ease my stress when I come back. Once I'm back I will be redoing a few things here and there and finishing some other stuff that needs to be done. Hopefully will be a clean install once its finished.

Albert_Trd

Yeah man, once this is running maybe he can get a little more into the community and make some meets.


Update:
1-Piece Driveshaft is here and fits great, was made local

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Sky80

Looking great guys, love the one piece intercooler piping/intake

__________________
'98 Kouki Build in Progress
'10 Subaru Legacy 2.5GT

Albert_Trd

Thanks!


Hopefully this is the week we finally start it up. gonna pull the engine, paint the bay, and reinstall. should be able to button up the rest of the motor.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Albert_Trd

Got the bay Painted:














Now Time to put everything together and get it on the road!

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Albert_Trd

Swapped oil pans to the lower profile GS(?) now the pan is up inside the subframe.







Then we installed the motor one final time. Now just need to bolt everything together and top off fluids!

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Apex Eight

Soooo clean. Love it

AzS13hatch

That looks awesome man! Job very well done

Albert_Trd

Thanks guys.


Got intercooler welded and installed, oil topped off, gear oil topped off, driveshaft installed, throttle cable on, radiator in with upper and lower, dipstick on, plus a handful of other stuff installed. Should be ready this week.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

JRex

Looking good guys. Love how clean and simple everything is

__________________
Never Due

AzS13hatch

What did you guys do for a throttle cable?

Albert_Trd

I ended up just using the stock one for now. Works and goes WOT. Will go tercel throttle cable eventually.

We ended up getting a clutch line made, and bled the slave. Pedal feels nice.

He bought a new Optima Battery, tie down bracket, terminals posts, and distribution blocks for relocating the battery to the trunk.

Once that comes in we should be able to start it up.

Also Started working on mocking up exhaust.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

AzS13hatch

I modified my stock one, and it fits perfectly. I am still a little unsure about it tho, I've never cut and re-attached a throttle cable before haha. Is the tercel cable a common swap in place of the stock one?

Albert_Trd

yeah we didn't cut his, we just opened up the locking nuts all the way and got it to fit.

Supposedly the Tercel cable fits perfect, its $15 from rock auto so we will try it.


Also P.S:

Put in the old battery and rigged some power wire and grounds to see if the harness was gonna work. Car fired right up first attempt. killed it immediately cause turbo return lines are still not on the car.

Now just need to button up some stuff so we can idle it and go through all the systems.

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

JZ78

You guys make sure to post a vid!

sent from my mind

__________________
91 s13 hatch back in the game

el_tapatio

What driveshaft are you using?

Drift_Squad144

@Drift_Squad144

Albert_Trd

Putting Battery in:





Made a hole to run power cables up:

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

Albert_Trd

Start up video:

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

That_240sx_tho

Freaking awesome!!
So worth the wait!

AzS13hatch

Awesome man! Well worth the wait, ready to see this thing tear up the street

JRex

It lives! That battery tray is badass!

__________________
Never Due

Albert_Trd

Videos of first test drive

__________________
~755whp 1jz.~ Proefi 128, e85, 1200cc, 6265, 39psi

sulik

Great work guys.