What hose to Rb25 waste gate? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

oldskool1303 · 08-29-2014, 08:35 PM

I read on a few forums that I could use one of the vacuum hoses from the intake manifold and connect it to the waste gate is this correct? Or how should I set it up. I don't have the charcoal canister it didn't come with my swap(rb25 series 2) any advice would be greatly appreciated thanks.

*dbeiler* · 08-30-2014, 10:00 AM

Typical setup is a 1/4" vacuum line routed from the intake manifold to the wastegate.

oldskool1303 · 09-02-2014, 04:41 PM

would it be this hose coming from the intake manifold

bosozokujin · 09-04-2014, 08:45 AM

you could tap it somewhere on the hot pipe close to the turbo. and that should be fine. i did that when i swapped rb25 turbo on my rb20

08-29-2014, 08:35 PM	#1
oldskool1303 Join Date: Apr 2010 Location: Baldwin Park Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	What hose to Rb25 waste gate? I read on a few forums that I could use one of the vacuum hoses from the intake manifold and connect it to the waste gate is this correct? Or how should I set it up. I don't have the charcoal canister it didn't come with my swap(rb25 series 2) any advice would be greatly appreciated thanks. Last edited by oldskool1303; 08-29-2014 at 09:51 PM..

09-02-2014, 04:41 PM	#3
oldskool1303 Join Date: Apr 2010 Location: Baldwin Park Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	would it be this hose coming from the intake manifold Last edited by oldskool1303; 09-02-2014 at 09:37 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-30-2014, 10:00 AM	#2
dbeiler Premium Member Join Date: Jun 2012 Location: Lancaster county, PA Age: 30 Posts: 465 Trader Rating: (4) Feedback Score: 4 reviews	Typical setup is a 1/4" vacuum line routed from the intake manifold to the wastegate.

09-04-2014, 08:45 AM	#4
bosozokujin Leaky Injector Join Date: May 2006 Location: texas Posts: 144 Trader Rating: (0) Feedback Score: 0 reviews	you could tap it somewhere on the hot pipe close to the turbo. and that should be fine. i did that when i swapped rb25 turbo on my rb20