Quote:
Originally Posted by se7en_
Hey all, I'm in the middle of an LS swap on my Silvia RHD.
Couple questions I can't seem to find even with searching.
1. The valve cover hits the Clutch master cylinder. I know I need a larger bore master with my t56 clutch(more on this later) and that will just make the problem worse. Is there a physically shorter master with a bigger bore that works? perhaps clocking it differently? Anyone done this without using reverse swing pedals and putting the master inside the cab?
2. I'm going to be running an AR5 trans from a colorado/canyon. It uses the t56 clutch and shares the output spline count from the t56 as well. The shifter location is terrible. Does someone make a shifter that moves the shifter location back about 7 inches? anyone know if the AR5 and T56 transmission is similar length? Google isn't helping much.
Any help would be greatly appreciated.
Thanks.
|
There's a few options on a RHD, I'm in the middle of an ADM S14A conversion to LS myself. Can look at a reverse swing clutch pedal conversion, or as logic suggests in finding a physically shorter clutch master.
I've gone with the following option, never mind the price it's not that much but wont really be a practical option in the US anyway:
https://www.holmart.com.au/holden-cl...vu-v6-3.8-v8-5
How have you gone with starter motor clearance to the steering rack input shaft/valve body?