Parts Shop MAX ~High Mount Intercooler Kit~ Real time quotes and ordering in thread! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DC Dan MAX USA · 12-05-2009, 06:08 PM

*****UPDATE*****
We have a Greddy Intake Manifold cold pipe solution finalized
and it has been added to the shopping cart as an HMIC kit option!

PURCHASES AND SHIPPING QUOTES DIRECTLY FROM THIS THREAD!
SIMPLY CLICK THE BLUE ADD TO CART LINK

VIEW CART

We have been doing custom drift spec intercoolers for a long time with fantastic results:

NOW: Parts Shop MAX is proud to bring you the first drift specific bolt on high mount intercooler in kit for SR and KA-T with T25 & T28 Bottom mounted turbos. This complete track proven HMIC kit delivers turbo response and reduction in temps that is second to none.

MAX S13-S14 SR & KA High Mount Intercooler for T25 & T28 Turbos $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

Key features of our drift specific High Mount Intercooler Kit:
~Mounts in front of the radiator, under the core support. Inlet and outlet shoot past the sides of the radiator.
~2.5"inlet and 2.75"outlet maintain proper velocity (3" pipes are too big for stock turbos)
~3.25" thick, extra wide core gives proper volume to the short height design
~Specifically designed for the bottom mount t25&t28 nissan turbos
~Extra short pipes for best response
~No BOV flange (we dont run them on our cars...TIG your choice of flange is optional)
~Allows better water cooling because it blocks less air from the radiator
~Mounts as far as possible away from front crash zone...and thieves...and cops
*Not compatible with pop up headlight motors and AC condenser
*Radiator support must be cut as shown in install photos

-Reinforced silicone couplers are available in Orange or Black.
S13 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 90* coupler

S14 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 45* coupler

MAX S14 High Mount Inter Cooler Kit $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

Track tested, seeing dramatically lower water temps, and instant boost response!

MAX S13 High Mount Inter Cooler Kit $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

Picture of the S13 complete kit:

installed

All intercooler kit options are available upon adding to cart for $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINEin stock date is 4-23

Intercooler sold by itself for$250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23

THE FOLLOWING ITEMS ARE SOLD SEPARATELY FROM THE HMIC KIT
(although they are a match made in heaven!)

I now have turbo inlets in stock for S15 T28 turbo ~ bottom mount ~ with Stock MAF or Z32 mass air flow meter Only $60!

Features:
~ 3 layer reinforced silicone couplers
~ Color choice of Black or Orange
~ Bead rolled Aluminum tube
~ Stainless steel hose clamps
~ Matches the Parts Shop MAX High Mount Intercooler (HMIC kit) perfectly!

Inlet pipe for T28 turbo with stock MAF available in black or orange: $60
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now!

Inlet pipe for T28 Turbo with Z32 MAF available in black or orange: $60
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now!

Install pictures

*****UPDATE*****

Inlet pipe for S13 T25 turbo is here !!!
Two versions are available, straight ($70) and curved ($80)
TIG welded and bead rolled aluminum tube with crank case breather fitting and 4 hose clamps
Comes with your choice of black or orange silicone couplers

Inlet pipe for T25 turbo with stock MAF available in black or orange and in two shapes: $70-$80
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now!

The curved tube is a little more expensive, and is designed to work with front mount intercooler pipe routing and curves around the OEM power steering reservoir rubber hose.

this version is a bit cleaner and a little cheaper than the bent aluminum tube inlet but requires our HMIC kit because the pipe routing of most FMIC kits interfere where this straight inlet puts the filter. Also the straight one requires you to lengthen the rubber hose on the bottom of the the power steering fluid reservoir.

installed pic on S13

get rid of all this crap!

VIEW CART

Exas Spec D · 12-05-2009, 06:22 PM

OMG, I want the HMIC!!! I shall buy... if I stay boosted.

kafanylovesme · 12-05-2009, 06:32 PM

Damn, Matt's angle in that picture is just awesome!

zaquanh · 12-05-2009, 06:42 PM

assuming s13 and s14 have different mount points which one would be for a s14 with a s13 sr20 ?

DC Dan MAX USA · 12-05-2009, 07:23 PM

There is 26 variations of this kit selectable in cart based on:
Coupler Color Preference,
Vehicle Body,
Engine and Turbo

It dont matter which "kit" you click on because they are all adjustable (once you are in the shopping cart) to your scenario

and 2 options of intercooler only - S13 or S14/15

RurouniMidnight · 12-05-2009, 08:36 PM

so i guess you got more 90 degree couplers back instock?

DC Dan MAX USA · 12-06-2009, 11:55 AM

not right now, but they will be here very soon

RurouniMidnight · 12-06-2009, 01:17 PM

cool ill be ordering soon then.

jars14 · 12-06-2009, 06:12 PM

how much to weld on bov flange?

DC Dan MAX USA · 12-07-2009, 01:54 PM

$20 - send us the flange and we'll take care if it...
...although the kit does not come with any BOV port for a reason ~ you dont want to blow off while modulating the throttle for a drift. And they can leak. No one in this shop has ran a BOV for years now.

jars14 · 12-07-2009, 11:18 PM

Does that ruin street manners?? Do you have to run a tune for it?? sorry this is just
philosophy Im unfamiliar with.

Viet-Tam · 12-09-2009, 12:07 PM

Will the cold pipe clear the radiator hose on a KA?

DC Dan MAX USA · 12-10-2009, 07:15 PM

Quote:

Originally Posted by jars14

Does that ruin street manners?? Do you have to run a tune for it?? sorry this is just
philosophy Im unfamiliar with.

It does not ruin anything, no retune, actually its better for the air/fuel because you are not letting any air escape that has already been metered for fuel by the MAF

Quote:

Originally Posted by Viet-Tam

Will the cold pipe clear the radiator hose on a KA?

it touches the hose. (see customer pic)

s14fbs · 12-22-2009, 07:20 PM

would this work on a ka-t top mount setup with some adjusting ??

DC Dan MAX USA · 12-23-2009, 06:43 PM

yes, you would just reroute the hotpipe

bkg775 · 12-27-2009, 06:13 PM

ok I am not trying to be dumb or flame in any kind of way because i have been in awe since you debuted your parts. i DD my car and slide it and I am Sr and I have a hks ssqv because I was told I need a BOV. wouldnt if I ran without a BOV everyday my lil t25 would blow and so my motor wouldn't like it either right?

DC Dan MAX USA · 12-29-2009, 12:16 AM

I have never experienced anyone blowing their turbo due to lack of BOV, you certainly dont need it for drift but if you feel better with one on there for your daily by all means add a flange and enjoy.

zorak · 12-29-2009, 02:57 AM

that picture is crazy.

Magnum375 Jr. · 12-29-2009, 07:53 PM

Hey Dan, I sent you another PM about purchasing this kit, like we were talking about, let me know what I need to do to send money and such.

DC Dan MAX USA · 12-29-2009, 09:10 PM

pms answered

s-cargo · 12-31-2009, 09:02 AM

what are the dimensions on the i.c.?

DC Dan MAX USA · 12-31-2009, 02:30 PM

the core is 688x190x86mm

240rb20 · 12-31-2009, 05:32 PM

im assuming u can make this setup work on an rb20 swapped s13 with a little bit of custom piping???

DC Dan MAX USA · 12-31-2009, 05:49 PM

yes indeed

DC Dan MAX USA · 01-07-2010, 12:29 PM

were almost out of these, I have 3 left and then there will be a wait till the next shipment.

s-cargo · 01-08-2010, 02:47 PM

piping sold seperately??

DC Dan MAX USA · 01-08-2010, 04:22 PM

never planned on selling pipes alone since it is made specifically for our completely custom intercooler

DisFrikkenWill · 01-12-2010, 05:24 PM

woah, you could use this even with the bumper reinforcement bar? which one do you get if you have a s14 with a s13 sr20det?

datboibrad · 01-14-2010, 01:04 AM

didnt see any mention of it but will you guys be releasing a version to work with greddy intake manifolds?

LayNLow · 01-14-2010, 02:51 AM

Quote:

Originally Posted by DisFrikkenWill

woah, you could use this even with the bumper reinforcement bar? which one do you get if you have a s14 with a s13 sr20det?

Yes, you can use this kit with the front reinforcement bar. The i/c mounts right up against the radiator. Nowhere close to the crash bar.
And for your other question, Dan will have to answer that one.

12-05-2009, 06:08 PM	#1
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	Parts Shop MAX ~High Mount Intercooler Kit~ Real time quotes and ordering in thread! ***UPDATE* We have a Greddy Intake Manifold cold pipe solution finalized and it has been added to the shopping cart as an HMIC kit option! PURCHASES AND SHIPPING QUOTES DIRECTLY FROM THIS THREAD! SIMPLY CLICK THE BLUE ADD TO CART LINK VIEW CART We have been doing custom drift spec intercoolers for a long time with fantastic results: NOW: Parts Shop MAX is proud to bring you the first drift specific bolt on high mount intercooler in kit for SR and KA-T with T25 & T28 Bottom mounted turbos. This complete track proven HMIC kit delivers turbo response and reduction in temps that is second to none. MAX S13-S14 SR & KA High Mount Intercooler for T25 & T28 Turbos** $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 Intercooler sold by itself for $250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 Key features of our drift specific High Mount Intercooler Kit: ~Mounts in front of the radiator, under the core support. Inlet and outlet shoot past the sides of the radiator. ~2.5"inlet and 2.75"outlet maintain proper velocity (3" pipes are too big for stock turbos) ~3.25" thick, extra wide core gives proper volume to the short height design ~Specifically designed for the bottom mount t25&t28 nissan turbos ~Extra short pipes for best response ~No BOV flange (we dont run them on our cars...TIG your choice of flange is optional) ~Allows better water cooling because it blocks less air from the radiator ~Mounts as far as possible away from front crash zone...and thieves...and cops Not compatible with pop up headlight motors and AC condenser Radiator support must be cut as shown in install photos -Reinforced silicone couplers are available in Orange or Black. S13 kit will have: 8x Stainless T-bolt clamps 2x 2.75" straight couplers 1x 2.5" straight coupler 1x 2"-2.5" step 90* coupler S14 kit will have: 8x Stainless T-bolt clamps 2x 2.75" straight couplers 1x 2.5" straight coupler 1x 2"-2.5" step 45* coupler MAX S14 High Mount Inter Cooler Kit $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 Intercooler sold by itself for $250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 Track tested, seeing dramatically lower water temps, and instant boost response! MAX S13 High Mount Inter Cooler Kit $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 Intercooler sold by itself for $250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 Picture of the S13 complete kit: installed All intercooler kit options are available upon adding to cart for $380 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINEin stock date is 4-23 Intercooler sold by itself for$250 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock date is 4-23 THE FOLLOWING ITEMS ARE SOLD SEPARATELY FROM THE HMIC KIT (although they are a match made in heaven!) I now have turbo inlets in stock for S15 T28 turbo ~ bottom mount ~ with Stock MAF or Z32 mass air flow meter Only $60! Features: ~ 3 layer reinforced silicone couplers ~ Color choice of Black or Orange ~ Bead rolled Aluminum tube ~ Stainless steel hose clamps ~ Matches the Parts Shop MAX High Mount Intercooler (HMIC kit) perfectly! Inlet pipe for T28 turbo with stock MAF available in black or orange: $60 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now! Inlet pipe for T28 Turbo with Z32 MAF available in black or orange: $60 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now! Install pictures ***UPDATE*** Inlet pipe for S13 T25 turbo is here !!! Two versions are available, straight ($70) and curved ($80) TIG welded and bead rolled aluminum tube with crank case breather fitting and 4 hose clamps Comes with your choice of black or orange silicone couplers Inlet pipe for T25 turbo with stock MAF available in black or orange and in two shapes: $70-$80 CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE in stock now! The curved tube is a little more expensive, and is designed to work with front mount intercooler pipe routing and curves around the OEM power steering reservoir rubber hose. this version is a bit cleaner and a little cheaper than the bent aluminum tube inlet but requires our HMIC kit because the pipe routing of most FMIC kits interfere where this straight inlet puts the filter. Also the straight one requires you to lengthen the rubber hose on the bottom of the the power steering fluid reservoir. installed pic on S13 get rid of all this crap! VIEW CART __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business! Last edited by DC Dan MAX USA; 05-13-2010 at 07:14 PM..

12-05-2009, 06:22 PM	#2
Exas Spec D Zilvia Junkie Join Date: Apr 2008 Location: Union City, CA Age: 34 Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	OMG, I want the HMIC!!! I shall buy... if I stay boosted. __________________

12-05-2009, 06:42 PM	#4
zaquanh Zilvia FREAK! Join Date: Feb 2007 Location: san antonio Posts: 1,073 Trader Rating: (3) Feedback Score: 3 reviews	assuming s13 and s14 have different mount points which one would be for a s14 with a s13 sr20 ? __________________ www.topshelfmotorsports.com http://www.redbubble.com/people/snapprint365/

12-05-2009, 07:23 PM	#5
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	There is 26 variations of this kit selectable in cart based on: Coupler Color Preference, Vehicle Body, Engine and Turbo It dont matter which "kit" you click on because they are all adjustable (once you are in the shopping cart) to your scenario and 2 options of intercooler only - S13 or S14/15 __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-05-2009, 08:36 PM	#6
RurouniMidnight Zilvia FREAK! Join Date: Feb 2004 Location: Houston TX Age: 38 Posts: 1,245 Trader Rating: (12) Feedback Score: 12 reviews	so i guess you got more 90 degree couplers back instock? __________________ http://nightparade.wordpress.com/ Join in on instagram @nightparade

12-05-2009, 06:32 PM	#3
kafanylovesme Zilvia FREAK! Join Date: Apr 2007 Location: Southern Cali Posts: 1,559 Trader Rating: (10) Feedback Score: 10 reviews	Damn, Matt's angle in that picture is just awesome!

12-06-2009, 11:55 AM	#7
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	not right now, but they will be here very soon __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-06-2009, 01:17 PM	#8
RurouniMidnight Zilvia FREAK! Join Date: Feb 2004 Location: Houston TX Age: 38 Posts: 1,245 Trader Rating: (12) Feedback Score: 12 reviews	cool ill be ordering soon then. __________________ http://nightparade.wordpress.com/ Join in on instagram @nightparade

12-06-2009, 06:12 PM	#9
jars14 Leaky Injector Join Date: Sep 2007 Location: missouri Age: 21 Posts: 130 Trader Rating: (4) Feedback Score: 4 reviews	how much to weld on bov flange?

12-07-2009, 01:54 PM	#10
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	$20 - send us the flange and we'll take care if it... ...although the kit does not come with any BOV port for a reason ~ you dont want to blow off while modulating the throttle for a drift. And they can leak. No one in this shop has ran a BOV for years now. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-07-2009, 11:18 PM	#11
jars14 Leaky Injector Join Date: Sep 2007 Location: missouri Age: 21 Posts: 130 Trader Rating: (4) Feedback Score: 4 reviews	Does that ruin street manners?? Do you have to run a tune for it?? sorry this is just philosophy Im unfamiliar with.

12-09-2009, 12:07 PM	#12
Viet-Tam Leaky Injector Join Date: Jul 2007 Location: Corinth,MS Age: 43 Posts: 88 Trader Rating: (2) Feedback Score: 2 reviews	Will the cold pipe clear the radiator hose on a KA?

12-22-2009, 07:20 PM	#14
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	would this work on a ka-t top mount setup with some adjusting ??

12-23-2009, 06:43 PM	#15
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	yes, you would just reroute the hotpipe __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-27-2009, 06:13 PM	#16
bkg775 Zilvia Member Join Date: Jun 2008 Location: Va Age: 35 Posts: 260 Trader Rating: (1) Feedback Score: 1 reviews	ok I am not trying to be dumb or flame in any kind of way because i have been in awe since you debuted your parts. i DD my car and slide it and I am Sr and I have a hks ssqv because I was told I need a BOV. wouldnt if I ran without a BOV everyday my lil t25 would blow and so my motor wouldn't like it either right?

12-29-2009, 12:16 AM	#17
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	I have never experienced anyone blowing their turbo due to lack of BOV, you certainly dont need it for drift but if you feel better with one on there for your daily by all means add a flange and enjoy. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-29-2009, 02:57 AM	#18
zorak Zilvia Member Join Date: Oct 2008 Location: South Age: 31 Posts: 287 Trader Rating: (4) Rides Gallery: zorak Feedback Score: 4 reviews	that picture is crazy.

12-29-2009, 07:53 PM	#19
Magnum375 Jr. Leaky Injector Join Date: Nov 2009 Location: PA Age: 32 Posts: 99 Trader Rating: (8) Feedback Score: 8 reviews	Hey Dan, I sent you another PM about purchasing this kit, like we were talking about, let me know what I need to do to send money and such.

12-29-2009, 09:10 PM	#20
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	pms answered __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-31-2009, 09:02 AM	#21
s-cargo Zilvia Member Join Date: Mar 2008 Location: Myrtle beach sc Age: 35 Posts: 250 Trader Rating: (2) Feedback Score: 2 reviews	what are the dimensions on the i.c.?

12-31-2009, 02:30 PM	#22
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	the core is 688x190x86mm __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

12-31-2009, 05:32 PM	#23
240rb20 Leaky Injector Join Date: Dec 2009 Location: st. louis Age: 31 Posts: 73 Trader Rating: (2) Feedback Score: 2 reviews	im assuming u can make this setup work on an rb20 swapped s13 with a little bit of custom piping???

12-31-2009, 05:49 PM	#24
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	yes indeed __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

01-07-2010, 12:29 PM	#25
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	were almost out of these, I have 3 left and then there will be a wait till the next shipment. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

01-08-2010, 02:47 PM	#26
s-cargo Zilvia Member Join Date: Mar 2008 Location: Myrtle beach sc Age: 35 Posts: 250 Trader Rating: (2) Feedback Score: 2 reviews	piping sold seperately??

01-08-2010, 04:22 PM	#27
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	never planned on selling pipes alone since it is made specifically for our completely custom intercooler __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

01-12-2010, 05:24 PM	#28
DisFrikkenWill Leaky Injector Join Date: Apr 2005 Location: . Age: 33 Posts: 85 Trader Rating: (2) Feedback Score: 2 reviews	woah, you could use this even with the bumper reinforcement bar? which one do you get if you have a s14 with a s13 sr20det?

01-14-2010, 01:04 AM	#29
datboibrad Zilvia Addict Join Date: Aug 2005 Location: tx Posts: 636 Trader Rating: (1) Feedback Score: 1 reviews	didnt see any mention of it but will you guys be releasing a version to work with greddy intake manifolds?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode