Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 05-02-2011, 08:52 AM   #1
91s13ForMeeh
 
Join Date: May 2011
Location: NorCal
Posts: 24
Trader Rating: (0)
91s13ForMeeh is an unknown quantity at this point
Feedback Score: 0 reviews
Fuel system troubleshoot?

Whats up guys? I recently picked up a s13 coupe and she seems to guzzle the gas. I Filled the tank The otherday, drove almost 200 miles and I'm now below empty. No engine mods either. Just a straight pipe from the cat back. Any suggestions? Clean air filter cleaned maf, changed oil+stabilizer plugs are good too.
91s13ForMeeh is offline   Reply With Quote
Sponsored Links
Old 05-02-2011, 09:45 AM   #2
hulkster_s13
Zilvia Member
 
hulkster_s13's Avatar
 
Join Date: Nov 2005
Location: down by da beach
Posts: 276
Trader Rating: (9)
hulkster_s13 is an unknown quantity at this point
Feedback Score: 9 reviews
Check your lines you got a leak most likely.
hulkster_s13 is offline   Reply With Quote
Old 05-02-2011, 09:45 AM   #3
jdm213
Zilvia Addict
 
jdm213's Avatar
 
Join Date: Sep 2009
Location: los angeles
Age: 31
Posts: 957
Trader Rating: (10)
jdm213 is an unknown quantity at this point
Feedback Score: 10 reviews
how about fuel filter
jdm213 is offline   Reply With Quote
Old 05-02-2011, 11:31 AM   #4
91s13ForMeeh
 
Join Date: May 2011
Location: NorCal
Posts: 24
Trader Rating: (0)
91s13ForMeeh is an unknown quantity at this point
Feedback Score: 0 reviews
Hmm. Seems as if the leak is coming from the injectors. I was Just going over the fuel system and I found that 3 of my 4 injectors fall out of resistance specs. Think this might be a result of the straight pipe and back pressure issues?
91s13ForMeeh is offline   Reply With Quote
Old 05-24-2011, 06:29 AM   #5
ZeeRasta
 
ZeeRasta's Avatar
 
Join Date: Dec 2010
Location: Tallahassee
Posts: 35
Trader Rating: (0)
ZeeRasta is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by 91s13ForMeeh View Post
Hmm. Seems as if the leak is coming from the injectors. I was Just going over the fuel system and I found that 3 of my 4 injectors fall out of resistance specs. Think this might be a result of the straight pipe and back pressure issues?
Most likely just old worn out injectors. Mine are like that now.
__________________
ZeeRasta is offline   Reply With Quote
Old 05-24-2011, 11:26 AM   #6
91s13ForMeeh
 
Join Date: May 2011
Location: NorCal
Posts: 24
Trader Rating: (0)
91s13ForMeeh is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by ZeeRasta View Post
Most likely just old worn out injectors. Mine are like that now.
Well the injectors were off spec by about an ohm. I talked to my instructor at school and he was saying I'm fine and to leave them. I'm still not getting the mileage though. I'm somewhere around 23-24 mpg. It'd be nice to get that extra 2-3 mpg. Anyways I went to smog it the other day and it failed. Gross poluter and evap system leak test fail. It turns out my fuel tank gasket wasnt sitting right. There's our evap issue. Second of all my timing was at 8 degrees! FYI I just picked the car up. Advanced timing etc. HC fail @ 100 ppm or so.. Jesus my truck just passed at 11 hc ppm. Gotta be my cat. lolz
91s13ForMeeh is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™