panda garage and jspec - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FRpilot · 10-03-2010, 11:27 AM

is panda garage and jspec dead? i haven't seen an update to their site in a while..

rb motoring seems to be dead for used jdm parts too. there's still jhot?

gijoe69 · 10-03-2010, 11:37 AM

go hit up Ronald @ Venus or Nikki @ Acutech or Dan @ R Crew or that other shop in San Bruno

*s13 @ fullboost* · 10-03-2010, 11:40 AM

Quote:

Originally Posted by FRpilot

is panda garage and jspec dead? i haven't seen an update to their site in a while..

rb motoring seems to be dead for used jdm parts too. there's still jhot?

you know that's a good question I haven't heard of anything like them closing. I heard something about RB motoring but I didn't think they closed down.

ILoveMyRHS13 · 10-03-2010, 11:40 AM

JSpec is still kicking. Sam still posts on this forum, haha.

Flicktitty · 10-03-2010, 11:43 AM

Quote:

Originally Posted by ILoveMyRHS13

JSpec is still kicking. Sam still posts on this forum, haha.

x2, i think it still gets updated? i was lookin at corner lights a few months back, but now there not on the site.

RBMotoring is now VRwheels.com

FRpilot · 10-03-2010, 11:53 AM

Quote:

Originally Posted by gijoe69

go hit up Ronald @ Venus or Nikki @ Acutech or Dan @ R Crew or that other shop in San Bruno

have not check rcrew in a while, but last i checked, their site wasn't really updated in a while also.

what other shop is in san bruno?

venus is far to check inventory, but i can always check online. plus, not sure venus carries as much interior stuff as they do with engines and body panels.

Quote:

Originally Posted by ILoveMyRHS13

JSpec is still kicking. Sam still posts on this forum, haha.

yea, he still post, but jspec used to be updated more regularly like once every 2-4 weeks. it has not been really updated in months so i was just wondering if parts still come in.

Quote:

Originally Posted by Flicktitty

x2, i think it still gets updated? i was lookin at corner lights a few months back, but now there not on the site.

RBMotoring is now VRwheels.com

thanks for the tip on rbmotoring's new site. seems legit! they still have that 1 off JGTC 1 lug TE37 table ornament for sale since forever. haha
they sell arcades too now!
they usually have good selection of imported jdm stuff like interiors and wheels, glad they are still around.
i guess they just wanted to change the name of their site to get away from the bad publicity with motorex and skylines fiasco.

it used to be there were a lot of sites to look for used wheels like takumiproject and rb motoring. glad one of them is still around.

where's panda garage though?

Flicktitty · 10-03-2010, 12:02 PM

there is
JDM-Online.com, Imported JDM Engines

and

http://www.jrautoparts.com/

i havent purchased anythign off there, but just another site to check out.

**ThatGuy** · 10-03-2010, 12:08 PM

Quote:

Originally Posted by FRpilot

yea, he still post, but jspec used to be updated more regularly like once every 2-4 weeks. it has not been really updated in months so i was just wondering if parts still come in.

You could always PM him directly and ask.

If I had to take a guess though, I'd say it is a demand problem.

With the majority of cheap asses buying knock-off bullshit for their "missiles", Sam may not have the demand for the parts he was able to once bring over and make a profit off of.

Just my

though.

ki_JDM_ds · 10-03-2010, 12:09 PM

I was at Panda Garage outside of San Diego around June 30 this year. Great shop and the guys working were very informative.

azndoc · 10-03-2010, 12:42 PM

Not speaking on behalf of Sam, but he's just busy.

Job, baby, and wifey now to care for.

Plus the Jspec thing isn't his main money maker, more of a side hobby thing now. So hence why its not constantly updated, but the parts are regulated being that if its shown then it is for sale.

If you want something from Sam you can pm him directly and let him know what you want. Just be warned that with today's Yen rate vs U.S. dollar that everything will seem expensive. Although, if you really want something authentic then paying the price is the result and also for legit service.

Good luck.

*!Zar!* · 10-03-2010, 01:37 PM

Quote:

Originally Posted by FRpilot

have not check rcrew in a while, but last i checked, their site wasn't really updated in a while also.

what other shop is in san bruno?

Japan parts.
428 North Canal Street
South San Francisco, CA 94080
(650) 871-9191

A crossdresser/tranny/someone use to run the shop; still does? I've been there a couple times. They are the ones who had that white s15 for the longest.

They are close to Tanforan.

articdragon192 · 10-03-2010, 01:54 PM

What Jack said. Sam's just bus. But if you get him cash, I'm sure he'll get you what you want/ need. I recently picked up a Tommy Kaira seat from him. He's always awesome to deal with.

Sileighty_85 · 10-03-2010, 04:12 PM

Quote:

Originally Posted by Flicktitty

there is
JDM-Online.com, Imported JDM Engines

Do not buy from these lying bastards.

Check my Sig

UNITEDMASTER · 10-03-2010, 04:17 PM

Panda garage is still in effect ,i just got some RB's from them a few months ago!!!

97240TB · 10-03-2010, 04:58 PM

I talked to Sam a couple months back through email.

You just need to contact him through a PM and tell him what you need.

gijoe69 · 10-03-2010, 05:02 PM

Japan Parts no longer? Thought frank let go of Steve...

udon! · 10-03-2010, 05:12 PM

Quote:

Originally Posted by ThatGuy

With the majority of cheap asses buying knock-off bullshit for their "missiles"

haha.

I laughed at this.

*ManoNegra* · 10-03-2010, 05:21 PM

Another thing with jspec
is that a lot of the cool shit doesn't even make it on to the site
since Sam sets stuff aside for friends
or sometimes rather see them go to cool people

dued · 10-03-2010, 06:02 PM

I was just at Panda Garage 2 weeks ago to buy some axles. They are still alive & they update their site pretty regularly.

*jspecusa* · 10-03-2010, 06:02 PM

Thanks for the help
Guys
Aside from the yen being 83 to 1 usd
And very slow economy it's not a good
Idea to be importing any parts right now.
If you guys want to see more new stuff on
Jspec I would suggest some help moving old inventory
Also there are some stuff not posted up yet, I will update
As soon as i'm not busy with my new house.
There's also a shipment in japan, but I'm not shipping them
Yet due to the high cost of shipping and exchange rate.
Again thank you guys for the support all these years(over 10 years)
I will keep doing jspec as my hobby as long as I have passion
For cars.
Sorry for the strange typing I'm on iPhone.
Please pm or email me with any request.
Nothing is rare just expensive.
Cheers,

Sam

*fliprayzin240sx* · 10-05-2010, 04:41 PM

Shit, try fucking 81yen to the dollar. I miss the good ol days of 120y to $$$. I almost bought some rims at YAJ for 75,000y, that shit would have been over $1k with shipping. I cant even flip rims no more...

Ratpack_Chad · 10-07-2010, 12:13 AM

I got my Sr from J SPEC it came with an HKS turbo actuator and a short shifter great condition and super fast shipping couldnt be happier.

10-03-2010, 12:02 PM	#7
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 34 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	there is JDM-Online.com, Imported JDM Engines and http://www.jrautoparts.com/ i havent purchased anythign off there, but just another site to check out. __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo

10-03-2010, 12:09 PM	#9
ki_JDM_ds Zilvia FREAK! Join Date: Nov 2006 Location: Wichita, Kansas Age: 33 Posts: 1,085 Trader Rating: (56) Feedback Score: 56 reviews	I was at Panda Garage outside of San Diego around June 30 this year. Great shop and the guys working were very informative. __________________

10-03-2010, 01:54 PM	#12
articdragon192 Post Whore! Join Date: Jan 2005 Location: West covina/ Irvine Age: 35 Posts: 6,789 Trader Rating: (9) Feedback Score: 9 reviews	What Jack said. Sam's just bus. But if you get him cash, I'm sure he'll get you what you want/ need. I recently picked up a Tommy Kaira seat from him. He's always awesome to deal with. __________________ Need help? Click here Still stumped? Try this Can't find what you're looking for? Here you go.

10-03-2010, 04:17 PM	#14
UNITEDMASTER Nissanaholic! Join Date: Apr 2006 Location: Anaheim Posts: 1,626 Trader Rating: (10) Feedback Score: 10 reviews	Panda garage is still in effect ,i just got some RB's from them a few months ago!!! __________________ MR JACKSON.

10-03-2010, 04:58 PM	#15
97240TB Zilvia Junkie Join Date: Oct 2009 Location: Tampa, Florida Age: 34 Posts: 338 Trader Rating: (0) Feedback Score: 0 reviews	I talked to Sam a couple months back through email. You just need to contact him through a PM and tell him what you need. __________________ 97' 240SX, VQHR swap Combplete.

10-03-2010, 11:37 AM	#2
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	go hit up Ronald @ Venus or Nikki @ Acutech or Dan @ R Crew or that other shop in San Bruno

10-03-2010, 12:42 PM	#10
azndoc Post Whore! Join Date: Feb 2006 Location: Los Angeles Age: 39 Posts: 9,487 Trader Rating: (47) Rides Gallery: azndoc Feedback Score: 47 reviews	Not speaking on behalf of Sam, but he's just busy. Job, baby, and wifey now to care for. Plus the Jspec thing isn't his main money maker, more of a side hobby thing now. So hence why its not constantly updated, but the parts are regulated being that if its shown then it is for sale. If you want something from Sam you can pm him directly and let him know what you want. Just be warned that with today's Yen rate vs U.S. dollar that everything will seem expensive. Although, if you really want something authentic then paying the price is the result and also for legit service. Good luck.

10-03-2010, 05:02 PM	#16
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	Japan Parts no longer? Thought frank let go of Steve...

10-03-2010, 05:21 PM	#18
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	Another thing with jspec is that a lot of the cool shit doesn't even make it on to the site since Sam sets stuff aside for friends or sometimes rather see them go to cool people

10-03-2010, 06:02 PM	#19
dued Zilvia Junkie Join Date: Dec 2005 Location: Vista, CA Posts: 450 Trader Rating: (3) Feedback Score: 3 reviews	I was just at Panda Garage 2 weeks ago to buy some axles. They are still alive & they update their site pretty regularly.

10-03-2010, 06:02 PM	#20
jspecusa Premium Member Join Date: Feb 2002 Location: socal Posts: 1,339 Trader Rating: (7) Feedback Score: 7 reviews	Thanks for the help Guys Aside from the yen being 83 to 1 usd And very slow economy it's not a good Idea to be importing any parts right now. If you guys want to see more new stuff on Jspec I would suggest some help moving old inventory Also there are some stuff not posted up yet, I will update As soon as i'm not busy with my new house. There's also a shipment in japan, but I'm not shipping them Yet due to the high cost of shipping and exchange rate. Again thank you guys for the support all these years(over 10 years) I will keep doing jspec as my hobby as long as I have passion For cars. Sorry for the strange typing I'm on iPhone. Please pm or email me with any request. Nothing is rare just expensive. Cheers, Sam __________________ Nissan Japan: "road to happiness has many curves" Jdmlivin: "Jdm is dead, the yen is crazy"

10-05-2010, 04:41 PM	#21
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Shit, try fucking 81yen to the dollar. I miss the good ol days of 120y to $$$. I almost bought some rims at YAJ for 75,000y, that shit would have been over $1k with shipping. I cant even flip rims no more... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

10-07-2010, 12:13 AM	#22
Ratpack_Chad Zilvia Member Join Date: May 2009 Location: San Jose, Ca Age: 32 Posts: 211 Trader Rating: (2) Feedback Score: 2 reviews	I got my Sr from J SPEC it came with an HKS turbo actuator and a short shifter great condition and super fast shipping couldnt be happier.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode