|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
07-21-2013, 05:35 PM | #1 |
s14 sr20 sputtering under load
I have a completely stock s14 sr20 and last year it ran good untill I hit a tire and re-did the front end. now it cant rev up under much load or throttle. it will just start cutting out. started at 6500 but has gotten worse and worse as time goes on. currently it will do it at 4000 while driving and about 6000 just reving it in place. I does seem to hold boost just fine. also if you advance the timing it will help it studder less so I advance it just to get it around
here is a video of me putting my foot to the floor. ( third time reving I used 25% throttle) things I have been though already. pressure check the charge pipes new and gaped spark plugs ngk coppers heat rang 7 gaped to 30 then later 28 different coil packs timing different CAS checked the timing chain to see if it jumped a tooth new TPS new nissan qwest alternator and battery cables tested MAF seached for broken grounds. (found some fixed them and no change) new head temp sensor there may be more things I have tried that I cant think of right now but I need all the suggestions I can get. Im starting to look in to fuel problems but I dont know where to start first other than the pressure gauge I just ordered. and I cant say for sure if its cutting out due to rich or lean because I dont have a wideband to tell.
__________________
go fast and take chances!! |
|
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|