Recommendations for NorCal Machine Shop - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CoryDangah · 04-13-2018, 01:33 PM

Hello All,

I was hoping for advise from the community on this one.

Background:
I have been tracking my 2006 350Z for around a year, and I have low compression (150psi) on at least two cylinders and 25% leak on at least one.
I am going to be tearing off my intake manifold and valve covers to isolate the leak to either the rings or the valve/seals (air was leaking from oil fill cap).

In any case, I am expecting to have to do some engine work and I would like to get the communities recommendations on good machine shops that provide quality machining and preferably, are familiar with VQ's.
I prefer NorCal but will drive to SoCal if needed.

Your help is greatly appreciated and I thank you ahead of time.

drfftn · 04-13-2018, 07:41 PM

I personally know nothing about those motors, but I know this shop specializes with them

https://www.hexagarage.com/

I believe they're in Santa Rosa.

04-13-2018, 01:33 PM	#1
CoryDangah Join Date: Dec 2010 Location: sacramento Age: 32 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Recommendations for NorCal Machine Shop Hello All, I was hoping for advise from the community on this one. Background: I have been tracking my 2006 350Z for around a year, and I have low compression (150psi) on at least two cylinders and 25% leak on at least one. I am going to be tearing off my intake manifold and valve covers to isolate the leak to either the rings or the valve/seals (air was leaking from oil fill cap). In any case, I am expecting to have to do some engine work and I would like to get the communities recommendations on good machine shops that provide quality machining and preferably, are familiar with VQ's. I prefer NorCal but will drive to SoCal if needed. Your help is greatly appreciated and I thank you ahead of time. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-13-2018, 07:41 PM	#2
drfftn Zilvia Member Join Date: May 2008 Location: San Jose, CA/Atlanta,Georgia Age: 31 Posts: 262 Trader Rating: (1) Feedback Score: 1 reviews	I personally know nothing about those motors, but I know this shop specializes with them https://www.hexagarage.com/ I believe they're in Santa Rosa.