Project Lilia Uber ("BUILD THREAD") - Page 5 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xharobikeslifex · 07-04-2011, 05:32 PM

Quote:

Originally Posted by codyace

I give you credit, I'd never ever ever ever dive that far into a chassis...the RHD conversion is commendable!

However with the ton of work on this thing, and you used orange sillicone for everythign? "C'mon man" That stuff looks so tacky. And you didn't bother to tear the engine down/clean it out/check it out? All that nice bling could goto waste if the engine is gunked up for got crap in it.

Either way, props on the build...didn't mean to nitpick but that sort of 'little stuff' goes a long way.

Ya thats why im going to put the engine on hold for now I'm focusing on the conversion and chassis right now then suspension wheels and brakes. I'll most likely rebuild the engine before I drop it in. And the orange silicon eh I think it gives it character but if you were to buy nissan oem silicone it will be about the same color just for your info.

Quote:

Originally Posted by WakeBHR

thought you were scrapping the s15 front idea?

I thought about it really hard and well I had the s13 rad support already drilled out and well the whole reason why I did that was for the sole purpose of no turning back. I'm going to go through with the conversion, and I think the only way I can pull this off is if I go widebody and slam this thing to the ground. Wheel fitment is going to be crucial here thats why I'm goin to bang the rears to 70mm and the fronts to 30mm kind of like what Ill garage did on that s13.5 I'll get Meisters so fitment will look allot like it but slammed more and most likely a different tire choice, I dont like theirs.

Tantwoforty · 07-04-2011, 07:06 PM

this is some sex right here

higgzy · 07-04-2011, 07:08 PM

Holy shit man!! your so thorough. How many silvia builds have you done out of interest?

Keep up the sick work. Can't see how people question you about suspension I cant see much of this car remaining stock (apart from chassis) and even that has been chopped and changed haha AWESOME!!!!!!!!!

xharobikeslifex · 07-04-2011, 07:17 PM

Quote:

Originally Posted by higgzy

Holy shit man!! your so thorough. How many silvia builds have you done out of interest?

Keep up the sick work. Can't see how people question you about suspension I cant see much of this car remaining stock (apart from chassis) and even that has been chopped and changed haha AWESOME!!!!!!!!!

This is my first build thread the only thing close to a build that I did was a video on youtube, which I'm sure allot of people have seen, when I was 16 and did my first engine swap. It's an sr20 swap into a 240sx surprized? I absolutely loved the car, but in late 2008 I had totaled it. Heres a link to the video enjoy! YouTube - ‪240sx sr20det swap‬&rlm;. Ya suspension is always brought up on other forums I posted this build thread at I keep telling people i'll get to it, but I do things in phases and I try not to mix it up, for example if I'm working on suspension that's all im working on until it's completely done. Everyone is just so anxious and I don't blame them because I am too.

codyace · 07-04-2011, 08:52 PM

Quote:

Originally Posted by xharobikeslifex

I'll most likely rebuild the engine before I drop it in. And the orange silicon eh I think it gives it character but if you were to buy nissan oem silicone it will be about the same color just for your info.

With as dirty/baked on as that looked, it would only behoove you to go all the way.

I wouldn't buy new OEM Nissan silicone either, FSM calls for Ultra Grey or equivalent. Again, love the work, but there is nothing more irritating to me than seeing an engine with orange silicone all over.

xharobikeslifex · 07-04-2011, 09:29 PM

Quote:

Originally Posted by codyace

With as dirty/baked on as that looked, it would only behoove you to go all the way.

I wouldn't buy new OEM Nissan silicone either, FSM calls for Ultra Grey or equivalent. Again, love the work, but there is nothing more irritating to me than seeing an engine with orange silicone all over.

To be honest its really least of my worries i mean when the engine is in I doubt ull even notice it, and I plan to rebuild it so i'll remember to take ur advice into consideration

Tantwoforty · 07-04-2011, 11:04 PM

i swair by ultra grey..
oil pan
water pump
oil pump
everything.
stuff never dies

xharobikeslifex · 07-07-2011, 06:48 PM

I had to revise this section because webshots shutdown and I lost the photos
Got some parts in today!
DMAX Type III side skirts and Kouki Tail lights!

*Wake* · 07-07-2011, 07:36 PM

Quote:

Originally Posted by Tantwoforty

i swair by ultra grey..
oil pan
water pump
oil pump
everything.
stuff never dies

I use blue for pump and thermo, gray for everything else. Its awesome.

Quote:

Originally Posted by xharobikeslifex

Got some parts in today!

your confusing the shit outta me. s15 or no? lol

innovation · 07-07-2011, 07:37 PM

Wait what? I thought you were sticking with the s15 front?

*Wake* · 07-07-2011, 07:41 PM

me too, read above^^ lol

xharobikeslifex · 07-07-2011, 08:32 PM

Hahah Ya I bought the whole kit from a guy here on zilvia super good deal I had to jump on it asap. Since dmax usa shut down I didn't even try to bother to ask the guy if I can just buy the sideskirts and rear bumper only. I plan to sell the 180sx type III front bumper, and as for the s15 front bumper... I should be receiving it sometime next week.

*Wake* · 07-07-2011, 08:58 PM

i swear from this pic that you already had the s15 front

xharobikeslifex · 07-07-2011, 09:06 PM

Quote:

Originally Posted by WakeBHR

i swear from this pic that you already had the s15 front

Ya no thats pics of what the seller sent me i'm still waiting to receive it

bc. · 07-07-2011, 10:11 PM

DOPE!!! You gonna be at KY rd2? My guess is the car wont be ready... sigh, but it looks legit!

Ninja edit: I WANT THAT s13 FRONT BUMPER. seriously, pm me if you haven't sold it.

xharobikeslifex · 07-07-2011, 10:38 PM

Quote:

Originally Posted by bc.

DOPE!!! You gonna be at KY rd2? My guess is the car wont be ready... sigh, but it looks legit!

Ninja edit: I WANT THAT s13 FRONT BUMPER. seriously, pm me if you haven't sold it.

Ya I might be there, but the project car will diffinitely not.

HPKMotorsports3 · 07-09-2011, 10:08 PM

I'm blown away by your attention to detail and workmanship. Great build! IMO you should just build the motor before putting her back in after seeing all that sludge on the valves. It's like wiping before you poop it just doesn't make sense.

xharobikeslifex · 07-11-2011, 05:52 PM

I had to revise this section because webshots shutdown and I lost my photos
I got more parts in today!

S15 Headlights, S15 hood hinges, DMAX Type III rear and front bumper, and DMAX Type III S15 front bumper which isn't shown in the pic the one in the pic I sold it came in with the package deal for the sideskirts and rear bumper.

bikrman2 · 07-11-2011, 06:10 PM

build looks awesome man. That old "conversion" was scary as hell. When are you planning on selling that 180sx bumper?

xharobikeslifex · 07-11-2011, 07:01 PM

Quote:

Originally Posted by bikrman2

build looks awesome man. That old "conversion" was scary as hell. When are you planning on selling that 180sx bumper?

It's actually already sold.

bc. · 07-11-2011, 09:01 PM

Quote:

Originally Posted by xharobikeslifex

It's actually already sold.

thanks again btw!

I have subscribed to your build thread so keep up the good work.

xharobikeslifex · 08-16-2011, 09:18 PM

I revised this section because webshots shutdown and I lost my photos
More Parts woot woot can't wait to install them!

*Wake* · 08-16-2011, 11:05 PM

I reserve judgement until car is done.

Looking not bad tho.

xharobikeslifex · 09-11-2011, 03:38 PM

I had to revise this section due to webshots shutting down and losing most of my photos.
So i started too dissassemble the engine once again, but except this time I'm going to rebuild it :wink:. I really don't need to go into detail about how to tear it down externally since I previously mentioned it earlier in my thread, but here is the whole reason why I've decided to rebuild the engine.

bc. · 09-11-2011, 08:02 PM

the outside of the motor looks so clean, but the inside looks like poopy, good choice to rebuild.

xharobikeslifex · 09-11-2011, 08:36 PM

Quote:

Originally Posted by bc.

the outside of the motor looks so clean, but the inside looks like poopy, good choice to rebuild.

haha u have no idea how many auto professors and students that have walked by and asked me whats wrong?

bc. · 09-11-2011, 08:53 PM

I guess it could be fine, but I wouldn't risk it. What are your rebuild plans? Tear it down and check everything or actually get new bottom end parts?

POSmiata · 09-11-2011, 08:58 PM

Just read your whole thread, glad your rebuilding it before putting it back in!!
But great thread, imho s13.5 are awesome. Looking forward to seeing this project finished!!

xharobikeslifex · 09-11-2011, 09:16 PM

Quote:

Originally Posted by bc.

I guess it could be fine, but I wouldn't risk it. What are your rebuild plans? Tear it down and check everything or actually get new bottom end parts?

My plans are too tear it down and replace everything necessary to stock minus the arp rod, head, and main bolts I also plan too replace from oem too aftermarket... hks head gasket and cam gears. My power goals are 300-350 hp which I hear is safe for stock internals.

JesusFast · 09-12-2011, 12:20 PM

wow great build!

07-07-2011, 06:48 PM	#128
xharobikeslifex Zilvia Member Join Date: Nov 2009 Location: Shawnee Posts: 168 Trader Rating: (5) Feedback Score: 5 reviews	I had to revise this section because webshots shutdown and I lost the photos Got some parts in today! DMAX Type III side skirts and Kouki Tail lights! __________________ S13.5 http://zilvia.net/f/chat/340975-proj...ld-thread.html Last edited by xharobikeslifex; 09-19-2013 at 10:29 PM..

07-07-2011, 07:41 PM	#131
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 38 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	me too, read above^^ lol __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

07-07-2011, 08:32 PM	#132
xharobikeslifex Zilvia Member Join Date: Nov 2009 Location: Shawnee Posts: 168 Trader Rating: (5) Feedback Score: 5 reviews	Hahah Ya I bought the whole kit from a guy here on zilvia super good deal I had to jump on it asap. Since dmax usa shut down I didn't even try to bother to ask the guy if I can just buy the sideskirts and rear bumper only. I plan to sell the 180sx type III front bumper, and as for the s15 front bumper... I should be receiving it sometime next week. __________________ S13.5 http://zilvia.net/f/chat/340975-proj...ld-thread.html

07-07-2011, 08:58 PM	#133
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 38 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	i swear from this pic that you already had the s15 front __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

07-07-2011, 10:11 PM	#135
bc. Zilvia Addict Join Date: Aug 2010 Location: St. Louis Posts: 868 Trader Rating: (0) Feedback Score: 0 reviews	DOPE!!! You gonna be at KY rd2? My guess is the car wont be ready... sigh, but it looks legit! Ninja edit: I WANT THAT s13 FRONT BUMPER. seriously, pm me if you haven't sold it. __________________ * S14SR22 * 9.0 c/r * GT3071R *

07-04-2011, 07:06 PM	#122
Tantwoforty Nissanaholic! Join Date: May 2009 Location: Riverside ca Age: 31 Posts: 1,890 Trader Rating: (20) Feedback Score: 20 reviews	this is some sex right here

07-04-2011, 07:08 PM	#123
higgzy Join Date: May 2011 Location: Sydney Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Holy shit man!! your so thorough. How many silvia builds have you done out of interest? Keep up the sick work. Can't see how people question you about suspension I cant see much of this car remaining stock (apart from chassis) and even that has been chopped and changed haha AWESOME!!!!!!!!!

07-04-2011, 11:04 PM	#127
Tantwoforty Nissanaholic! Join Date: May 2009 Location: Riverside ca Age: 31 Posts: 1,890 Trader Rating: (20) Feedback Score: 20 reviews	i swair by ultra grey.. oil pan water pump oil pump everything. stuff never dies

07-07-2011, 07:37 PM	#130
innovation Zilvia Junkie Join Date: Jul 2005 Location: Chino, CA Posts: 437 Trader Rating: (3) Feedback Score: 3 reviews	Wait what? I thought you were sticking with the s15 front?

07-11-2011, 05:52 PM	#138
xharobikeslifex Zilvia Member Join Date: Nov 2009 Location: Shawnee Posts: 168 Trader Rating: (5) Feedback Score: 5 reviews	I had to revise this section because webshots shutdown and I lost my photos I got more parts in today! S15 Headlights, S15 hood hinges, DMAX Type III rear and front bumper, and DMAX Type III S15 front bumper which isn't shown in the pic the one in the pic I sold it came in with the package deal for the sideskirts and rear bumper. __________________ S13.5 http://zilvia.net/f/chat/340975-proj...ld-thread.html Last edited by xharobikeslifex; 09-19-2013 at 10:29 PM..

08-16-2011, 09:18 PM	#142
xharobikeslifex Zilvia Member Join Date: Nov 2009 Location: Shawnee Posts: 168 Trader Rating: (5) Feedback Score: 5 reviews	I revised this section because webshots shutdown and I lost my photos More Parts woot woot can't wait to install them! __________________ S13.5 http://zilvia.net/f/chat/340975-proj...ld-thread.html Last edited by xharobikeslifex; 09-19-2013 at 10:30 PM..

08-16-2011, 11:05 PM	#143
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 38 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	I reserve judgement until car is done. Looking not bad tho. __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

09-11-2011, 03:38 PM	#144
xharobikeslifex Zilvia Member Join Date: Nov 2009 Location: Shawnee Posts: 168 Trader Rating: (5) Feedback Score: 5 reviews	I had to revise this section due to webshots shutting down and losing most of my photos. So i started too dissassemble the engine once again, but except this time I'm going to rebuild it :wink:. I really don't need to go into detail about how to tear it down externally since I previously mentioned it earlier in my thread, but here is the whole reason why I've decided to rebuild the engine. __________________ S13.5 http://zilvia.net/f/chat/340975-proj...ld-thread.html Last edited by xharobikeslifex; 09-19-2013 at 10:31 PM..

09-11-2011, 08:02 PM	#145
bc. Zilvia Addict Join Date: Aug 2010 Location: St. Louis Posts: 868 Trader Rating: (0) Feedback Score: 0 reviews	the outside of the motor looks so clean, but the inside looks like poopy, good choice to rebuild. __________________ * S14SR22 * 9.0 c/r * GT3071R *

09-11-2011, 08:53 PM	#147
bc. Zilvia Addict Join Date: Aug 2010 Location: St. Louis Posts: 868 Trader Rating: (0) Feedback Score: 0 reviews	I guess it could be fine, but I wouldn't risk it. What are your rebuild plans? Tear it down and check everything or actually get new bottom end parts? __________________ * S14SR22 * 9.0 c/r * GT3071R *

09-11-2011, 08:58 PM	#148
POSmiata Join Date: Jul 2011 Location: Ft Myers, Fl Age: 30 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Just read your whole thread, glad your rebuilding it before putting it back in!! But great thread, imho s13.5 are awesome. Looking forward to seeing this project finished!!

09-12-2011, 12:20 PM	#150
JesusFast Zilvia Member Join Date: Jan 2011 Location: Chicago Age: 35 Posts: 218 Trader Rating: (3) Feedback Score: 3 reviews	wow great build!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode