Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-18-2010, 05:28 PM   #1
niteridaz503
Zilvia Addict
 
niteridaz503's Avatar
 
Join Date: Sep 2009
Location: Nor Cal
Age: 34
Posts: 720
Trader Rating: (10)
niteridaz503 is an unknown quantity at this point
Feedback Score: 10 reviews
S13 & 200sx Problems

Ok so got 2 cars that are pretty much broken & cant do crap about at this point lol well one is a 92 240sx hatch and the other is a 95 200sx so hope you guys can help me with trying to figure out the issue.

The 240sx didnt go into gear & even when the car is off 1st, 5th and reverse still grind a bit going in even with the clutch pedal being pressed. got a new slave & Clutch master cylinder installed along with fresh fuild and bled properly. yet still wont go into gear when the cars on what could be wrong? Only mods are B&M shifter and VLSD as far as drivetrain go can anyone help??????????????

Now my 95 200sx has a FWD SR20DET swap & when the cars idling it sounds perfectly fine & when its under load it sputters and bogs down. going to do a full tune up on it & see if that helps but can i be a blown turbo??????? dont know much about this car kinda just got it as a grocery getter


So if anyone can help with these 2 issues id greatly apreciate it & ill PM if possible as well
__________________
Quote:
Originally Posted by yetijeff View Post
Hes higher than giraffe pussy lolz
niteridaz503 is offline   Reply With Quote
Sponsored Links
Old 03-18-2010, 09:59 PM   #2
buentellomma
Zilvia Junkie
 
buentellomma's Avatar
 
Join Date: Mar 2010
Location: Goodyear AZ
Age: 35
Posts: 480
Trader Rating: (6)
buentellomma is an unknown quantity at this point
Feedback Score: 6 reviews
Quote:
Originally Posted by niteridaz503 View Post
Ok so got 2 cars that are pretty much broken & cant do crap about at this point lol well one is a 92 240sx hatch and the other is a 95 200sx so hope you guys can help me with trying to figure out the issue.

The 240sx didnt go into gear & even when the car is off 1st, 5th and reverse still grind a bit going in even with the clutch pedal being pressed. got a new slave & Clutch master cylinder installed along with fresh fuild and bled properly. yet still wont go into gear when the cars on what could be wrong? Only mods are B&M shifter and VLSD as far as drivetrain go can anyone help??????????????

Now my 95 200sx has a FWD SR20DET swap & when the cars idling it sounds perfectly fine & when its under load it sputters and bogs down. going to do a full tune up on it & see if that helps but can i be a blown turbo??????? dont know much about this car kinda just got it as a grocery getter


So if anyone can help with these 2 issues id greatly apreciate it & ill PM if possible as well

my advice for the 240 would be to try adjusting the clutch, you have to undo it from the pedal and move the adjuster to make the clutch engage sooner. this is the easiest fix to try. as for the sr, check your mafs, make sure the wires on it are not bent at all and that they are clean. i just had this problem and one wire was slightly bent.
buentellomma is offline   Reply With Quote
Old 05-28-2010, 03:23 PM   #3
niteridaz503
Zilvia Addict
 
niteridaz503's Avatar
 
Join Date: Sep 2009
Location: Nor Cal
Age: 34
Posts: 720
Trader Rating: (10)
niteridaz503 is an unknown quantity at this point
Feedback Score: 10 reviews
Exclamation

Quote:
Originally Posted by buentellomma View Post
my advice for the 240 would be to try adjusting the clutch, you have to undo it from the pedal and move the adjuster to make the clutch engage sooner. this is the easiest fix to try. as for the sr, check your mafs, make sure the wires on it are not bent at all and that they are clean. i just had this problem and one wire was slightly bent.
yeah as far as the 240sx it ended up being the clutch the springs were broken on the disc so fixed that and now the cars back on the road again
as far as the 200sx it has an AEM ignition & fuel controller & it seems like every time the wiring is moved the cars idle fluctuates then eventually shuts off what do you think that might be?
__________________
Quote:
Originally Posted by yetijeff View Post
Hes higher than giraffe pussy lolz
niteridaz503 is offline   Reply With Quote
Old 05-28-2010, 05:37 PM   #4
g6civcx
Post Whore!
 
g6civcx's Avatar
 
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
g6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfection
Feedback Score: 5 reviews
Check the easy things first on the clutch. Make sure you remove the clutch damper. Adjust the clutch pedal for maximum travel. Bleed the clutch line really really well.

If that doesn't fix it then you have bigger problems.
g6civcx is offline   Reply With Quote
Old 06-01-2010, 01:21 PM   #5
niteridaz503
Zilvia Addict
 
niteridaz503's Avatar
 
Join Date: Sep 2009
Location: Nor Cal
Age: 34
Posts: 720
Trader Rating: (10)
niteridaz503 is an unknown quantity at this point
Feedback Score: 10 reviews
Quote:
Originally Posted by g6civcx View Post
Check the easy things first on the clutch. Make sure you remove the clutch damper. Adjust the clutch pedal for maximum travel. Bleed the clutch line really really well.

If that doesn't fix it then you have bigger problems.
The clutch was already fixed and is broken in and all that jazz but still need help fixing the damn 200sx still anyone know much bout em?
__________________
Quote:
Originally Posted by yetijeff View Post
Hes higher than giraffe pussy lolz
niteridaz503 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™