********Drift Freaq Custom Urethane KA/SR/CA Engine Mounts************** - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 06-08-2010, 10:10 PM

These are high durometer polyurethane engine mounts. The mount bolts do not run straight through the Urethane .

This is done so as to prevent vibrational transfer that you would get with straight through side to side stud.

On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot aka the industrial window caulking, which is inferior!

These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards.

They have been track tested and run on many cars.

The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top.

There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539...ml#post3416846

It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo!

The Group buy price is $110 per set with $15 for shipping anywhere in the continental U.S.

This group buy will require a 10 person buy in to get this price. So lets get this party started.

I decided to add this. If you do not care about the $10 discount you can buy immediately at the $120 per set price which means $135 shipped. my paypal is [email protected]

unreal- · 06-10-2010, 12:32 PM

ohh tempting on GB pricing, but it will take forever to get 10 commited people. Im impatient.

Express Payment sent lol

**mrmephistopheles** · 06-13-2010, 11:47 AM

Glad to see you got around to getting a group buy going. Nine months and sixteen threads has got to be a record.

chris_240sx · 06-13-2010, 12:17 PM

Very tempting....
What tranny mount do you recommend with these mounts?

Odysseus · 06-13-2010, 12:55 PM

Why would you want to lower your engine? I thought the point of mounts like Nismo mounts was to raise your engine?

Propaganda · 06-13-2010, 02:35 PM

Point of Nismo mounts is not to raise engine. It is to be stiffer. Higher is a bad sideeffect that you get.

drift freaq · 06-13-2010, 03:33 PM

Quote:

Originally Posted by mrmephistopheles

Glad to see you got around to getting a group buy going. Nine months and sixteen threads has got to be a record.

LOL you are right Kevin, It was just getting the interest rolling again. It took a little work but its here.

On the issue of trans mount I do have an announcement to make. I am working on doing a trans mount for the car. I would need a ten person minimum commitment for the production run to roll.

The price would be $60 for the trans mount.

So that would be $180 for all three mounts and the shipping would stay the same.

If people are down for the trans mount and ten people are willing to pony up. Then I could get that show on the road.

drift freaq · 06-16-2010, 02:41 PM

Quote:

Originally Posted by chris_240sx

Very tempting....
What tranny mount do you recommend with these mounts?

I can sell you the Nismo mount for $50 but if you and some other people step up I could make a trans mount.

*hOngsterr* · 06-16-2010, 03:17 PM

a new nismo tranny mount? lol

&& hmmm, do we have to deposit first or just throw in our names lol

drift freaq · 06-16-2010, 03:25 PM

Quote:

Originally Posted by hOngsterr

a new nismo tranny mount? lol

&& hmmm, do we have to deposit first or just throw in our names lol

Well if you don't purchase shit does not happen. Saying you will buy something and actually buying are two different things.

p.s. its all here in writing

Quote:

The Group buy price is $110 per set with $15 for shipping anywhere in the continental U.S.

This group buy will require a 10 person buy in to get this price. So lets get this party started.

I decided to add this. If you do not care about the $10 discount you can buy immediately at the $120 per set price which means $135 shipped. my paypal is [email protected]

chris_240sx · 06-17-2010, 12:19 PM

Quote:

Originally Posted by drift freaq

I can sell you the Nismo mount for $50 but if you and some other people step up I could make a trans mount.

I hear ya, but I'll need the mounts soon and it doesn't seem like nine other people are going to step up before then.

drift freaq · 06-17-2010, 01:35 PM

Quote:

Originally Posted by chris_240sx

I hear ya, but I'll need the mounts soon and it doesn't seem like nine other people are going to step up before then.

then like I said here you can buy the mounts now for $120 which is only $10 more.

nwmrkt · 06-20-2010, 11:26 PM

Im in, for the tranny mount as well.

battery1882 · 06-24-2010, 07:14 PM

I'm impatient as well,

PM sent!

NMs14.5kouki · 07-04-2010, 09:10 PM

How do these hold up with top mount turbo setups? i know my runners come decently close to my motor mounts....

drift freaq · 07-04-2010, 10:16 PM

Quote:

Originally Posted by NMs14.5kouki

How do these hold up with top mount turbo setups? i know my runners come decently close to my motor mounts....

I would recommend heat shield wrapping your manifold runners. Besides heat shielding the mounts.

NMs14.5kouki · 07-07-2010, 12:54 AM

ok how many more people you need for the group buy? Im also down to get a trans mount later on.

drift freaq · 07-07-2010, 12:19 PM

Quote:

Originally Posted by NMs14.5kouki

ok how many more people you need for the group buy? Im also down to get a trans mount later on.

well typical of Zilvia and I know this sounds cynical but its true. Lots of people have shown interest. No one has committed financially. I have had sales at the regular price though because most people are not patient enough to wait for 10.

Given the nature of things I am not really that surprised. Its why I just might open the group at a straight $115. Anyone can purchase anytime but if I do it it will be a limited time offer.

On the trans mount side seriously it is a make or break situation. If 10 people do not commit with purchase then I cannot do the run.

Nezahualcoyotl · 07-08-2010, 08:57 AM

I am looking to buy Motor and trans mounts. I would definitely be interested.

Sam_Well.13 · 07-08-2010, 10:57 AM

anyone has experience these personally?

i thought lowering your engine is bad?

unreal- · 07-11-2010, 03:04 AM

Quote:

Originally Posted by Sam_Well.13

anyone has experience these personally?

i thought lowering your engine is bad?

http://zilvia.net/f/tech-talk/317539...e-mouts-4.html read my post @ the bottom. other reviews are throughout the thread.

lowering the engine improves center of gravity. Personally, mine raised up a bit, as my header is now firmly against the body, and the steering knuckle is rubbing against the header too. My old mounts were pretty shot/soft, and the obx header was notorious for fitment issues (with the shot mounts it fit without incident), so im not surprised.

With the mounts the oil pan is almost flush with the front cross-member. Besides the vibration from the header against the body of my car, you couldnt tell i have poly mounts in the car. i love these mounts

nismoracingsx · 07-31-2010, 08:02 PM

These will be on my "buy" list for when I go home =)

doz · 08-17-2010, 01:40 PM

I'm interested in buying a set right now - how much to post to UK?

gijoe69 · 11-24-2010, 06:34 PM

still have them available?

06-08-2010, 10:10 PM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	******Drift Freaq Custom Urethane KA/SR/CA Engine Mounts********** These are high durometer polyurethane engine mounts. The mount bolts do not run straight through the Urethane . This is done so as to prevent vibrational transfer that you would get with straight through side to side stud. On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot aka the industrial window caulking, which is inferior! These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards. They have been track tested and run on many cars. The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top. There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539...ml#post3416846 It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo! The Group buy price is $110 per set with $15 for shipping anywhere in the continental U.S. This group buy will require a 10 person buy in to get this price. So lets get this party started. I decided to add this. If you do not care about the $10 discount you can buy immediately at the $120 per set price which means $135 shipped. my paypal is [email protected] __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html** http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-10-2010, 12:32 PM	#2
unreal- Zilvia Junkie Join Date: Jan 2003 Location: Central NJ Posts: 516 Trader Rating: (16) Feedback Score: 16 reviews	ohh tempting on GB pricing, but it will take forever to get 10 commited people. Im impatient. Express Payment sent lol

06-13-2010, 12:17 PM	#4
chris_240sx Zilvia Junkie Join Date: Mar 2009 Location: Washington Posts: 425 Trader Rating: (0) Feedback Score: 0 reviews	Very tempting.... What tranny mount do you recommend with these mounts?

06-13-2010, 12:55 PM	#5
Odysseus Zilvia Addict Join Date: Nov 2008 Location: S14 Posts: 640 Trader Rating: (7) Feedback Score: 7 reviews	Why would you want to lower your engine? I thought the point of mounts like Nismo mounts was to raise your engine?

06-13-2010, 02:35 PM	#6
Propaganda Zilvia Junkie Join Date: May 2005 Location: Charleston, SC Age: 34 Posts: 451 Trader Rating: (10) Feedback Score: 10 reviews	Point of Nismo mounts is not to raise engine. It is to be stiffer. Higher is a bad sideeffect that you get.

06-20-2010, 11:26 PM	#13
nwmrkt Zilvia Member Join Date: Jul 2007 Location: Canada Posts: 155 Trader Rating: (11) Feedback Score: 11 reviews	Im in, for the tranny mount as well.

06-24-2010, 07:14 PM	#14
battery1882 Zilvia Addict Join Date: Jan 2005 Location: Fullerton, CA Age: 39 Posts: 694 Trader Rating: (13) Feedback Score: 13 reviews	I'm impatient as well, PM sent!

07-04-2010, 09:10 PM	#15
NMs14.5kouki Zilvia Addict Join Date: Apr 2009 Location: albuquerque Age: 33 Posts: 654 Trader Rating: (38) Feedback Score: 38 reviews	How do these hold up with top mount turbo setups? i know my runners come decently close to my motor mounts....

07-07-2010, 12:54 AM	#17
NMs14.5kouki Zilvia Addict Join Date: Apr 2009 Location: albuquerque Age: 33 Posts: 654 Trader Rating: (38) Feedback Score: 38 reviews	ok how many more people you need for the group buy? Im also down to get a trans mount later on.

07-08-2010, 08:57 AM	#19
Nezahualcoyotl Zilvia Addict Join Date: Oct 2006 Location: Santa Ana, California Age: 34 Posts: 769 Trader Rating: (16) Feedback Score: 16 reviews	I am looking to buy Motor and trans mounts. I would definitely be interested.

07-08-2010, 10:57 AM	#20
Sam_Well.13 BANNED Join Date: Jul 2010 Location: Costa Mesa Posts: 855 Trader Rating: (5) Feedback Score: 5 reviews	anyone has experience these personally? i thought lowering your engine is bad?

07-31-2010, 08:02 PM	#22
nismoracingsx Zilvia Addict Join Date: Sep 2007 Location: Alachua, FL Age: 34 Posts: 969 Trader Rating: (32) Feedback Score: 32 reviews	These will be on my "buy" list for when I go home =)

08-17-2010, 01:40 PM	#23
doz Join Date: Feb 2008 Location: UK Age: 37 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in buying a set right now - how much to post to UK?

11-24-2010, 06:34 PM	#24
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	still have them available?