YOSHIKOUKI

Hey guys my car starts idels perfect but doesnt wanna rev. It has brand new pro wiring specialties s13 to 14 harness tried stock ecu maf injectors same problem tried rs enthalpy tuned ecu 550 injectors and z32 maf still the samething ive come to a dead end and really need some help if u guys could give some pointers that would be great

Sent from my SM-N900T using Tapatalk

brndck

first off, that rubber hose next to the downpipe is going to catch on fire.
second, the maf is way too close to the turbo
third, was the car running fine before you put that wiring harness in?
fourth, do i even need to ask if you've tested the maf?

__________________

http://outslidersandsmokeproduce.blogspot.com/

YOSHIKOUKI

Yes maf is fine tried stock and z32 and this isnt how the motor looks now this is an old pic but car was running good after a rebuild then it sat for 2 ½ years for gathering parts and so forth but now i have this problem of it starting and running but it shuts off after u give it any throttle

Sent from my SM-N900T using Tapatalk

TheRealSy90

You can't just swap in a z32 mafs without having the engine re tuned for that mafs.


Sent from my iPhone using Tapatalk

__________________

brndck

He used a enthalpy ecu, tuned for 550 injectors and z32 maf

__________________

http://outslidersandsmokeproduce.blogspot.com/

YOSHIKOUKI

And also tried stock maf ecu and injectors

Sent from my SM-N900T using Tapatalk

TheRealSy90

So you swapped in a different chip into the ecu that's tuned for the stock mafs when you tried the stock mafs?


Sent from my iPhone using Tapatalk

__________________

YOSHIKOUKI

No had two separate ECU's

Sent from my SM-N900T using Tapatalk

rc1honda

What kind of Vac are you pulling at idle and what's your TPS voltage looking like

YOSHIKOUKI

No vac leaks and tps and cas are normal im thinking it might be internal but everything has been covered on the outside

Sent from my SM-N900T using Tapatalk

YOSHIKOUKI

Found the problem when installing my pbm top mount my buddy forgot to take out the plastic bag he stuffed inside so nothing would get in thats why it was shuttin off when u would give it any kind of load smh silly find but aye shit happens but thx to everyone that helped out

Sent from my SM-N900T using Tapatalk

brndck

WOW. glad you found it man.

__________________

http://outslidersandsmokeproduce.blogspot.com/

YOSHIKOUKI

Thx man literally had everyone i know scratching their heads elite mechanics at that lol

Sent from my SM-N900T using Tapatalk

coBBz

Maybe this is why my 1jz wont rev out LOL nice find

YOSHIKOUKI

Thx man lol glw ur 1j hope u get to the bottom of it can very stressful lol


Sent from my SM-N900T using Tapatalk

coBBz

I can't fking believe it... I found a rag in my turbo inlet......... revving issue is now solved and the 1j sounds fking amazing lol had no idea how common this was..

brndck

uhhhhh .

__________________

http://outslidersandsmokeproduce.blogspot.com/

YOSHIKOUKI

Omg 😂😂😂😂 wow smh glad u found it

Sent from my SM-N900T using Tapatalk

di-devol

ROFL, this is the best find I've ever seen.

__________________