RS-Enthalpy DYNO-TUNING for $400!! WA STATE - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AJZax · 03-09-2013, 07:44 PM

JULY 18th DYNO-TUNING

MESSAGE ME IF YOU'RE INTERESTED. I'll get you squared away with Martin and we can get to tuning asap!

RS-Enthalpy is flying from Florida to dyno-tune our cars. Dynotuning is going to be $400 base cost. Key features:
- $400 includes ECU AND dyno-tuning!
- Nissan&Infiniti Engine Management : SR, KA, VQ, VG, VH, CA, VK VR etc.!
-RB25s and RB20s are only $299 (I don't know why lol they just are)
- modified rev-cut to prevent lean condition on rev limiter
- 2 step launch control (optional)
- optional dual-mapping (multi-tune) --- additional $50
- Any fuel type. Pump, E85, race gas etc.
- RS-Enthalpy ECU is about as flexible as a Power-FC; believe it or not.

It'll be in Port Orchard, Washington. JULY 18th!!! I just need everyone coming to message me so I can coordinate the best day for everyone. Drivers, shop, and Enthalpy.

OR you can call me at (360)-471-7757. Please call asap.

50% deposits required by the 5th of july.

Everyone who attends will have their car in the promo video shooting for the shop and for RS-Enthalpy promotional videos!
Media coverage credit of:
-Penumbra Productions
-ZMercy Films

EVENT PAGE: http://ajdrift.com/event/rs-enthalpy...nce=fcb4d159a7

jamg · 03-09-2013, 07:56 PM

this is a really good deal, if it comes with the ECU.

Bambi · 03-09-2013, 08:19 PM

Quote:

Originally Posted by jamg

this is a really good deal, if it comes with the ECU.

Which it does so it is!

*TheRealSy90* · 03-09-2013, 09:16 PM

Awh I need my Enthalpy ecu tuned

seagrasser · 03-12-2013, 08:31 PM

subscribed for more info

AJZax · 03-16-2013, 06:13 PM

Dyno date had to be pushed back. I'm coordinating the event, and school finals are this week and rushing to get car done for april 7th open drift to try and get 5/8ths teched and pro-am fd lisence and coordinating with new sponsors etc. So plates over-flowing right now. Dyno date may be april 4th or the week after. Not positive yet. Sorry :/ I'll update as soon as dyno-date is solid again. It was solid, it's my fault it isn't now, ran into snags on my build. :/

Please inquire soon though if you're interested. If you already have the ECU, the dyno-tune will only be $150 I believe. I'll have to check with RS-Enthalpy. (same price as re-flash, just it'll be a dyno-tune flash

)

And yes, dyno tune and ECU combo package!

Please inquire soon as we'll get you your rom-tune shipped to you first so you can test your setup so dyno-tuning goes smoother and there's less stuff and time consumption per car on dyno-tuning day. Please P.M. me if you're seriously interested!

Also if you need to pick up parts or upgrade injectors, hit up PassingLanePerformance and they'll hook you up. Tell them Aaron Mansfield sent you. Injectors, FiveO injectors are actually fine. I'll be running them for my build.

khai01 · 03-24-2013, 10:42 AM

any update on the tuning date yet?

AJZax · 03-27-2013, 06:41 PM

Please message me and let me know ASAP if you're interested in this deal! We need to know how many ECUs to bring from Florida and how much dyno-time to allocate etc. We'll probably start dyno-tuning as early as it's legal to be loud.

As of now, Puget-Sound-Auto updated as APRIL 12th as their available date to hose a dyno-tuning event at their facility.
A driver is trying to get it pushed to APRIL 15th (we'll see what happens, I'm doing my best to accomodate everyone, but I also have to work with the companies and the media guys and all the drivers so it's tough)

RS-Enthalpy can install and tune their RS-Enthalpy ECUs, or they can dynotune
-AEM stand alone ECUs
-Apexi Power FC
-Nistune
-SAFC (I'd suggest replacing or adding the enthalpy ecu as SAFC is pretty limited)

$40 to get on the dyno and just do some pulls to see what your car puts down. (i tried to get it cheaper but facility owners want at least $40 a car for pulls)

Johannes · 04-05-2013, 11:27 AM

Don't pass on to this great deal fellow Northwest people! Dyno date has been moved to April 12th!

As AJZax said, $400 for ROM tuned ECU + Dyno tune!
$350 for Nistune re-tune!

voiddweller · 04-05-2013, 12:01 PM

Martin tuned my car two weeks ago and was able to produce 241whp with my stock T25 on 7lbs of boost. Amazing!

Here are my engine mods. E62 ROM Tuned ECU:

S13 Blacktop SR20DET
Rebuilt OEM T25
Greddy S13 VSPL FMIC
Enjuku WAI
DeatschWerks 550cc Fuel Injectors
S13 Koyo Racing Radiator
JWT Flywheel, Clutch and Pressure Plate
GReddy Water, Alternator and PS Pulleys (PS was disconnected for runs)
Driveshaft Shop Aluminum Driveshaft

He is worth every cent and a great guy. Sign up if you are on the fence. You will not be disappointed.

idahotuner · 04-05-2013, 12:17 PM

seriously, fuck, i need to trailer my car over and see if the den tune could help me out

Johannes · 04-05-2013, 09:34 PM

Quote:

Originally Posted by idahotuner

seriously, fuck, i need to trailer my car over and see if the den tune could help me out

Rent one from U-haul for a day! Is the car non-running because you need a tune?

gostrider · 04-06-2013, 06:12 AM

I will be bringing my car to tampa on a uhaul when i get my injectors and maf installed..

AJZax · 04-15-2013, 05:52 PM

Dyno-tuning is over!

HOWEVER! Due to interest we are pooling people for another dyno-tuning session in july-august time frame. Please contact me so I can answer any questions and put you in touch with RS-Enthalpy and get you all squared away!

The more people we get comitted the better, as then we can garuntee him coming up. We'll have to charge roughly $450 for dyno-tuning as the shop is charging us for dyno-use.

We had a stock s13 SR (red top) (FMIC and turbo-back) hit 260whp. stock pump, injectors and turbo(t25)!

AJZax · 06-19-2013, 11:19 AM

If you want RS-Enthalpy dyno-tuning from Martin himself up here in WA state, just message me! We'll get you squared away! Interest is even higher this time!

TIMEFRAME is in the air, have to coordinate between dyno-shop, enthalpy, and all the drivers. lol
Target: Mid-july ish (not pro-am round 4/pro rd 5, I'm going to that lol)

Notable outputs on the dyno as of last session:
---Stock SR - t25, 370cc injectors, cxracing fmic, and unknown turbo-back with muffler 260whp (forgot psi)
---Stock bottom SR - ISIS 3871, beat up ebay fmic, turbo back (with muffler) , poncams, 550cc inj, 298whp 14psi (plenty more to go)
---Stock bottom KA24DE (NA) - stage 2 BC cams, ebay exhaust and intake 155whp

Price is $400 if you don't have enthalpy ECU, that includes dyno-tuning.
HOWEVER, we have to pay the shop to per car for using their dyno. It's $80 a car. I'm TRYING to get it lowered... :/
Still $480 is normally what you pay for a dyno-tune from a local shop with less than half the experience of martin lol, and it includes the ECU in the price. He also dyno-tunes AEM, vipec, power-fc, nistune etc.

If you have any questions, I can probably answer them. If for some reason I can't... then I will put you in touch with martin, who will definitely be able to

ALSO If you are getting an enthalpy dyno-tune with us, and you have to get a couple more parts and you're tight on budget, let me know and I'll see what I can do about getting you a hook up from passing-lane-performance or enjuku racing.

See you all there!

AJZax · 07-01-2013, 11:04 AM

RS-ENTHALPY DYNO TUNING

JULY 18th

Puget Sound Auto Repair, Port Orchard, WA.

$60- $80 hook up fee, depending on head count.

Please call me asap to setup your 50% deposit by the 5th of July.
We need this to cover our costs of doing this.
3604717757
I'll immediately put you in touch with martin (owner/tuner of RS-Enthalpy) to get you squared away.

Thanks!

l2u4k0assx · 08-18-2013, 05:54 PM

This kind of awesome stuff always happens when I am not around.

I wont be back till Octish.

white_lightning240 · 09-01-2013, 02:40 AM

I was told that they might be in Portland in December? Is that correct? Will re flashing be available? Thank you

AJZax · 09-15-2013, 05:38 PM

As far as I know martin from RS-Enthalpy does not have any scheduled tuning in portland.

We are doing another October 10th, same location.

Please like my facebook to get a hold of me: facebook.com/ajdrift
And message me on there. I don't check my P.M.s here often enough.

Please contact me asap if you want to get onboard for this one, so I can allot dyno-time for you.

AJZax · 09-19-2013, 02:06 PM

One more bump!
October 10th!
Dyno tuning!
Another session also coming in december!
Get on board asap before we run out of dyno time-slots!

Hit me up ASAP!

AJZax · 10-09-2013, 10:46 AM

dynotuning tomorrow!
you we can still get like one person in. just add me on facebook and contact me. or contact me through my website.

www.facebook.com/ajdrift
www.ajdrift.com

December is going to be the next session, however it's pretty much full.

03-09-2013, 07:44 PM	#1
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	RS-Enthalpy DYNO-TUNING for $400!! WA STATE JULY 18th DYNO-TUNING MESSAGE ME IF YOU'RE INTERESTED. I'll get you squared away with Martin and we can get to tuning asap! RS-Enthalpy is flying from Florida to dyno-tune our cars. Dynotuning is going to be $400 base cost. Key features: - $400 includes ECU AND dyno-tuning! - Nissan&Infiniti Engine Management : SR, KA, VQ, VG, VH, CA, VK VR etc.! -RB25s and RB20s are only $299 (I don't know why lol they just are) - modified rev-cut to prevent lean condition on rev limiter - 2 step launch control (optional) - optional dual-mapping (multi-tune) --- additional $50 - Any fuel type. Pump, E85, race gas etc. - RS-Enthalpy ECU is about as flexible as a Power-FC; believe it or not. It'll be in Port Orchard, Washington. JULY 18th!!! I just need everyone coming to message me so I can coordinate the best day for everyone. Drivers, shop, and Enthalpy. OR you can call me at (360)-471-7757. Please call asap. 50% deposits required by the 5th of july. Everyone who attends will have their car in the promo video shooting for the shop and for RS-Enthalpy promotional videos! Media coverage credit of: -Penumbra Productions -ZMercy Films EVENT PAGE: http://ajdrift.com/event/rs-enthalpy...nce=fcb4d159a7 Last edited by AJZax; 07-01-2013 at 11:02 AM.. Reason: Totally wonky link. Corrected to actual intended web-link.

03-12-2013, 08:31 PM	#5
seagrasser Zilvia Member Join Date: Nov 2011 Location: Lynnwood WA Age: 46 Posts: 256 Trader Rating: (2) Feedback Score: 2 reviews	subscribed for more info __________________ S14 RB25

03-27-2013, 06:41 PM	#8
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	Please message me and let me know ASAP if you're interested in this deal! We need to know how many ECUs to bring from Florida and how much dyno-time to allocate etc. We'll probably start dyno-tuning as early as it's legal to be loud. As of now, Puget-Sound-Auto updated as APRIL 12th as their available date to hose a dyno-tuning event at their facility. A driver is trying to get it pushed to APRIL 15th (we'll see what happens, I'm doing my best to accomodate everyone, but I also have to work with the companies and the media guys and all the drivers so it's tough) RS-Enthalpy can install and tune their RS-Enthalpy ECUs, or they can dynotune -AEM stand alone ECUs -Apexi Power FC -Nistune -SAFC (I'd suggest replacing or adding the enthalpy ecu as SAFC is pretty limited) $40 to get on the dyno and just do some pulls to see what your car puts down. (i tried to get it cheaper but facility owners want at least $40 a car for pulls) Last edited by AJZax; 03-27-2013 at 06:50 PM.. Reason: additional information -_-

04-05-2013, 12:01 PM	#10
voiddweller Zilvia Member Join Date: Jan 2005 Location: Gulf Coast Age: 52 Posts: 252 Trader Rating: (4) Rides Gallery: voiddweller Feedback Score: 4 reviews	Martin tuned my car two weeks ago and was able to produce 241whp with my stock T25 on 7lbs of boost. Amazing! Here are my engine mods. E62 ROM Tuned ECU: S13 Blacktop SR20DET Rebuilt OEM T25 Greddy S13 VSPL FMIC Enjuku WAI DeatschWerks 550cc Fuel Injectors S13 Koyo Racing Radiator JWT Flywheel, Clutch and Pressure Plate GReddy Water, Alternator and PS Pulleys (PS was disconnected for runs) Driveshaft Shop Aluminum Driveshaft He is worth every cent and a great guy. Sign up if you are on the fence. You will not be disappointed. __________________ 97 S14 SE w/S13 Blacktop 04 CL9 Last edited by voiddweller; 04-08-2013 at 02:52 PM.. Reason: Added pic. Will post Winpep file when I get a copy.

04-05-2013, 12:17 PM	#11
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	seriously, fuck, i need to trailer my car over and see if the den tune could help me out __________________ My Twin Scroll Gt30r Sr22det Build

03-09-2013, 07:56 PM	#2
jamg Nissanaholic! Join Date: May 2009 Location: GA Posts: 2,106 Trader Rating: (7) Feedback Score: 7 reviews	this is a really good deal, if it comes with the ECU.

03-16-2013, 06:13 PM	#6
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	Dyno date had to be pushed back. I'm coordinating the event, and school finals are this week and rushing to get car done for april 7th open drift to try and get 5/8ths teched and pro-am fd lisence and coordinating with new sponsors etc. So plates over-flowing right now. Dyno date may be april 4th or the week after. Not positive yet. Sorry :/ I'll update as soon as dyno-date is solid again. It was solid, it's my fault it isn't now, ran into snags on my build. :/ Please inquire soon though if you're interested. If you already have the ECU, the dyno-tune will only be $150 I believe. I'll have to check with RS-Enthalpy. (same price as re-flash, just it'll be a dyno-tune flash ) And yes, dyno tune and ECU combo package! Please inquire soon as we'll get you your rom-tune shipped to you first so you can test your setup so dyno-tuning goes smoother and there's less stuff and time consumption per car on dyno-tuning day. Please P.M. me if you're seriously interested! Also if you need to pick up parts or upgrade injectors, hit up PassingLanePerformance and they'll hook you up. Tell them Aaron Mansfield sent you. Injectors, FiveO injectors are actually fine. I'll be running them for my build.

03-24-2013, 10:42 AM	#7
khai01 Leaky Injector Join Date: Jul 2005 Location: Lewiston, ID Posts: 118 Trader Rating: (4) Feedback Score: 4 reviews	any update on the tuning date yet?

04-05-2013, 11:27 AM	#9
Johannes Zilvia Member Join Date: Feb 2009 Location: Washington Age: 27 Posts: 254 Trader Rating: (7) Feedback Score: 7 reviews	Don't pass on to this great deal fellow Northwest people! Dyno date has been moved to April 12th! As AJZax said, $400 for ROM tuned ECU + Dyno tune! $350 for Nistune re-tune!

04-06-2013, 06:12 AM	#13
gostrider Zilvia Addict Join Date: Feb 2012 Location: CFL Age: 8 Posts: 638 Trader Rating: (7) Feedback Score: 7 reviews	I will be bringing my car to tampa on a uhaul when i get my injectors and maf installed.. __________________ *240 with illegal engine mod.*

04-15-2013, 05:52 PM	#14
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	Dyno-tuning is over! HOWEVER! Due to interest we are pooling people for another dyno-tuning session in july-august time frame. Please contact me so I can answer any questions and put you in touch with RS-Enthalpy and get you all squared away! The more people we get comitted the better, as then we can garuntee him coming up. We'll have to charge roughly $450 for dyno-tuning as the shop is charging us for dyno-use. We had a stock s13 SR (red top) (FMIC and turbo-back) hit 260whp. stock pump, injectors and turbo(t25)! __________________ www.ajdrift.com Mansfield, A - 145

06-19-2013, 11:19 AM	#15
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	If you want RS-Enthalpy dyno-tuning from Martin himself up here in WA state, just message me! We'll get you squared away! Interest is even higher this time! TIMEFRAME is in the air, have to coordinate between dyno-shop, enthalpy, and all the drivers. lol Target: Mid-july ish (not pro-am round 4/pro rd 5, I'm going to that lol) Notable outputs on the dyno as of last session: ---Stock SR - t25, 370cc injectors, cxracing fmic, and unknown turbo-back with muffler 260whp (forgot psi) ---Stock bottom SR - ISIS 3871, beat up ebay fmic, turbo back (with muffler) , poncams, 550cc inj, 298whp 14psi (plenty more to go) ---Stock bottom KA24DE (NA) - stage 2 BC cams, ebay exhaust and intake 155whp Price is $400 if you don't have enthalpy ECU, that includes dyno-tuning. HOWEVER, we have to pay the shop to per car for using their dyno. It's $80 a car. I'm TRYING to get it lowered... :/ Still $480 is normally what you pay for a dyno-tune from a local shop with less than half the experience of martin lol, and it includes the ECU in the price. He also dyno-tunes AEM, vipec, power-fc, nistune etc. If you have any questions, I can probably answer them. If for some reason I can't... then I will put you in touch with martin, who will definitely be able to ALSO If you are getting an enthalpy dyno-tune with us, and you have to get a couple more parts and you're tight on budget, let me know and I'll see what I can do about getting you a hook up from passing-lane-performance or enjuku racing. See you all there! __________________ www.ajdrift.com Mansfield, A - 145

07-01-2013, 11:04 AM	#16
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	RS-ENTHALPY DYNO TUNING JULY 18th Puget Sound Auto Repair, Port Orchard, WA. $60- $80 hook up fee, depending on head count. Please call me asap to setup your 50% deposit by the 5th of July. We need this to cover our costs of doing this. 3604717757 I'll immediately put you in touch with martin (owner/tuner of RS-Enthalpy) to get you squared away. Thanks! __________________ www.ajdrift.com Mansfield, A - 145

08-18-2013, 05:54 PM	#17
l2u4k0assx Join Date: Jul 2008 Location: Eastern North Carolina Age: 31 Posts: 46 Trader Rating: (1) Feedback Score: 1 reviews	This kind of awesome stuff always happens when I am not around. I wont be back till Octish.

09-01-2013, 02:40 AM	#18
white_lightning240 Join Date: Aug 2013 Location: corvallis oregon Age: 32 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	I was told that they might be in Portland in December? Is that correct? Will re flashing be available? Thank you

09-15-2013, 05:38 PM	#19
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	As far as I know martin from RS-Enthalpy does not have any scheduled tuning in portland. We are doing another October 10th, same location. Please like my facebook to get a hold of me: facebook.com/ajdrift And message me on there. I don't check my P.M.s here often enough. Please contact me asap if you want to get onboard for this one, so I can allot dyno-time for you. __________________ www.ajdrift.com Mansfield, A - 145

09-19-2013, 02:06 PM	#20
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	One more bump! October 10th! Dyno tuning! Another session also coming in december! Get on board asap before we run out of dyno time-slots! Hit me up ASAP! __________________ www.ajdrift.com Mansfield, A - 145

10-09-2013, 10:46 AM	#21
AJZax Leaky Injector Join Date: Feb 2012 Location: WA state Posts: 123 Trader Rating: (3) Feedback Score: 3 reviews	dynotuning tomorrow! you we can still get like one person in. just add me on facebook and contact me. or contact me through my website. www.facebook.com/ajdrift www.ajdrift.com December is going to be the next session, however it's pretty much full. __________________ www.ajdrift.com Mansfield, A - 145

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode