|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
|
Thread Tools | Display Modes |
03-04-2018, 10:17 PM
|
#1 |
|
Leaky Injector
|
Sr20/PFC: ECU not getting power
HELP!!!
ECU NOT GETTING POWER... -I went through the entire FSM procedure to test the ECU/Engine harness grounding and power, continuity etc. -With power on there is no power to pin 49/59 -All grounds going into the ecu have continuity -tested the ECCS relay (bench test and swapped in another. -car runs and starts by hardwiring the relay. Am I missing a ground somewhere? Here are my assumptions (please correct me if I am wrong) -ECU is fine -wiring/engine harness is fine -relays are fine |
|
|
| Sponsored Links |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode