sr tranny - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jlawdet · 09-28-2010, 04:20 PM

hi searched and couldnt find so ill post. my sr tranny is making some odd noises. i know that i need a clutch but intermitantly my transmission makes a whinning noise that goes with the revs of my motor. it doesnt stop when the clutch is engaged or when its not. any ideas? im pretty scared at the moment and also is the rumour true that sr trans n KA trans are the same but with a different bell housing?

DRIFTING_SIL_EIGHTY · 09-28-2010, 04:35 PM

The noise could mean that your low on tranny fluid. Usually its the throw out bearing but it stops whining when you step on the clutch. Since yours does it with clutch depressed or not, it could be the fluid.

Yes the trans are the same.

firefighter573 · 11-28-2010, 02:07 AM

Quote:

Originally Posted by DRIFTING_SIL_EIGHTY

The noise could mean that your low on tranny fluid. Usually its the throw out bearing but it stops whining when you step on the clutch. Since yours does it with clutch depressed or not, it could be the fluid.

Yes the trans are the same.

wrong. the transmissions are NOT the same.

The Ratios ARE different, The bellhousings and cases ARE different.

but to answer your question bud yes you can go SR with a KA tranny but you do need to swap the bellhousings, and when you pull the bellhousing off your new KA trans BE SURE TO ADJUST THE SHIFT FORKS BACK TO WHERE ALL 3 OF THEM ARE EQUAL LENGTH OR YOU WILL NOT BE ABLE TO SHIFT THROUGH ALL THE GEARS AFTER YOU INSTALL YOUR TRANS! you might have to combination a little bit with the shifter and the forks. But once its done everything should mesh smooothly

Sileighty_85 · 11-28-2010, 09:45 AM

Quote:

Originally Posted by jlawdet

im pretty scared at the moment and also is the rumour true that sr trans n KA trans are the same but with a different bell housing?

Quote:

Originally Posted by DRIFTING_SIL_EIGHTY

Yes the trans are the same.

Quote:

Originally Posted by firefighter573

wrong. the transmissions are NOT the same.

The Ratios ARE different, The bellhousings and cases ARE different.

uhhh NO they are correct, 5 gear is the only difference but that really doesnt matter.

Quote:

Originally Posted by firefighter573

but to answer your question bud yes you can go SR with a KA tranny but you do need to swap the bellhousings, and when you pull the bellhousing off your new KA trans BE SURE TO ADJUST THE SHIFT FORKS BACK TO WHERE ALL 3 OF THEM ARE EQUAL LENGTH OR YOU WILL NOT BE ABLE TO SHIFT THROUGH ALL THE GEARS AFTER YOU INSTALL YOUR TRANS! you might have to combination a little bit with the shifter and the forks. But once its done everything should mesh smooothly

Uhhhh No that is wrong you should not have to adjust anything inside the transmissions

Ive swapped many tons of SR to KA Bellhousings and never had to mess with anything inside the housings and they all work fine

The Transmissions are pretty much exactly the same minus 5th gear and the front bell housings

firefighter573 · 11-28-2010, 10:13 PM

Quote:

Originally Posted by Sileighty_85

uhhh NO they are correct, 5 gear is the only difference but that really doesnt matter.

Uhhhh No that is wrong you should not have to adjust anything inside the transmissions

Ive swapped many tons of SR to KA Bellhousings and never had to mess with anything inside the housings and they all work fine

The Transmissions are pretty much exactly the same minus 5th gear and the front bell housings

i have done plenty bellhousing swaps myself, and maybe i should have restated my theory...In "Some Cases" the shift works can come out of place, just be sure they are flush with one another. and like i said "the ratios are different" and they are. the 5th gear ratio on SR is 0.838 and KA is 0.759.

jlawdet · 09-28-2010, 04:57 PM

okay. the noise is very weird. it stops after a few seconds but it comes outta no where then goes away. but im gonna do a clutch then and do a fluid change.

Sileighty_85 · 11-28-2010, 10:22 PM

You shouldnt even have that section exposed seening that that sections on on the shifter side, and you should only be removing the clutch housing side

09-28-2010, 04:20 PM	#1
jlawdet Leaky Injector Join Date: Aug 2010 Location: bucks county Age: 30 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	sr tranny hi searched and couldnt find so ill post. my sr tranny is making some odd noises. i know that i need a clutch but intermitantly my transmission makes a whinning noise that goes with the revs of my motor. it doesnt stop when the clutch is engaged or when its not. any ideas? im pretty scared at the moment and also is the rumour true that sr trans n KA trans are the same but with a different bell housing?

11-28-2010, 10:22 PM	#7
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	You shouldnt even have that section exposed seening that that sections on on the shifter side, and you should only be removing the clutch housing side __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit Last edited by Sileighty_85; 11-28-2010 at 11:03 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-28-2010, 04:35 PM	#2
DRIFTING_SIL_EIGHTY Zilvia Addict Join Date: Nov 2002 Location: gardena/los angeles Posts: 752 Trader Rating: (14) Feedback Score: 14 reviews	The noise could mean that your low on tranny fluid. Usually its the throw out bearing but it stops whining when you step on the clutch. Since yours does it with clutch depressed or not, it could be the fluid. Yes the trans are the same.

09-28-2010, 04:57 PM	#6
jlawdet Leaky Injector Join Date: Aug 2010 Location: bucks county Age: 30 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	okay. the noise is very weird. it stops after a few seconds but it comes outta no where then goes away. but im gonna do a clutch then and do a fluid change.