|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
|
03-17-2014, 08:50 PM | #1 |
Leaky Injector
Join Date: Feb 2014
Location: Oregon
Age: 33
Posts: 108
Trader Rating: (5)
Feedback Score: 5 reviews
|
Nistune screenshot, couple of questions.
I just bought an S13 240SX w/ an S14 SR20DET swap. This has the stock MAF and (I think) stock injectors. It runs really rich and has problems idling/running when it is cold, once it warms up it still runs rich but it runs pretty strong.
The ECU already had a nistune type 3 board installed so I hooked my laptop up to it today and let the car warm up to get some base readings and see if I was throwing any codes. I was worried about the RED for the VTC Solenoid, Fuel Pump Relay, and TPS Idle until I read in the Nistune documentation that it was normal (odd color choice for normal). I am a little worried about the Knock Sensor Code and the TPS voltage being so low, I was under the impression it shouldnt be under around .4. Can anybody chime in on whether or not any of this might be the reason I run so rough cold and so rich? Thanks |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|