GT2871 USERS. SR motor - Page 25 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

codyace · 11-30-2008, 12:09 PM

Quote:

Originally Posted by WILDACEX187

safe for the turbo i mean.

I dont' see 22-24 being over or outside the safe relm of the turbocharger. I plan on going 22ish psi with the meth for a dyno run or two to see what the old pig puts down.

s15specR · 12-02-2008, 07:23 AM

I was told by a local garrett dealer that 22-23psi is pushing it on the gt2871r, also the GT30 carries the same shaft as these and should be ran no more than 22-23 as well.

smelly240 · 12-02-2008, 07:55 AM

25 is easily doable on a 3071r... its well within the compressor efficiency.

codyace · 12-02-2008, 01:47 PM

Quote:

Originally Posted by s15specR

I was told by a local garrett dealer that 22-23psi is pushing it on the gt2871r, also the GT30 carries the same shaft as these and should be ran no more than 22-23 as well.

Pushing the relm of making power <> pushing the safe limits.

It should continue to maker power to the 22/23 psi level, but I don't forsee it being bad on the turbo to goto 25psi....it'll still flow hot air, so I could see torque figures being higher, not so much HP once you go beyond 22/23 psi

jakerps13 · 12-12-2008, 09:56 PM

Anyone running the t3 yet?

Sileighty_85 · 01-01-2009, 10:16 AM

Just got Mine Dyno'd yesterday, no dyno chart yet I have to drive back to Al, since I couldnt get it tuned before I left (fucken UPS)

but Made 363whp and 332ft-lbs Torque on Stock Cams @ 1.5bar

My tuner says it feels faster than 360, so im excited i cant wait to feel the power >_<

GT2871R .64
PowerFC W/Boost controller
Z32 MAF
Splitfire Ignition System
Crankshaft Polished and Balanced
Pulsar GTI-R Main Crank Bolts
Nismo Main Crank Bearings
Tomei Micro-Finished Con-Rod Bearings
Eagle H Con-Rods
Wiseco Pistons
Power Enterprise 1.5 mil Metal H/G
ARP Head Studs
Brian Crower Valve Springs with Titanium Retainers
Peak Performance Tubular Manifold
Greddy Type-R BOV
Greddy Front Mount Intercooler
RSR Turbo Back Exhaust
OS Giken Twin Plate Clutch
ect...

NewS13Guy · 01-01-2009, 10:56 AM

^ pics of engine bay??

Sileighty_85 · 01-01-2009, 12:07 PM

Quote:

Originally Posted by NewS13Guy

^ pics of engine bay??

Hard drive crashed 3 days ago so this is probably latest pic i have (4months ago)

its not pretty lookin, Looks like a regular SR. Didnt get to paint the engine bay in time.

I got build thread here if ya wanna see more pics http://zilvia.net/f/chat/178498-my-p...6k-beware.html

usdm180sx · 01-01-2009, 12:28 PM

Snap. Do you have a/c?

Sileighty_85 · 01-01-2009, 12:45 PM

Quote:

Originally Posted by usdm180sx

Snap. Do you have a/c?

Yes and No, AC is all plumbed up and worked but I think my Exspansion Valve is stuck open

S13 curtis · 01-01-2009, 04:31 PM

Holy Shit, 363whp on stock cams...

How high is your compression?

Sileighty_85 · 01-01-2009, 04:58 PM

Quote:

Originally Posted by S13 curtis

Holy Shit, 363whp on stock cams...

How high is your compression?

Stock Compression Ratio's
Wiseco 8.5:1

S13 curtis · 01-01-2009, 05:03 PM

i also have a 2871r sr20 red top, i'm still on stock cams.
you jus made me wanna see what mine will put out on stock cams.lol
only difference is i have apex 1.1mm, stock internals, Greddy Intake manifold, E-manage blue, i have no a/c or p/s. im jus waiting to get 740cc injectors.

Sileighty_85 · 01-01-2009, 05:13 PM

Quote:

Originally Posted by S13 curtis

i also have a 2871r sr20 red top, i'm still on stock cams.
you jus made me wanna see what mine will put out on stock cams.lol
only difference is i have apex 1.1mm, stock internals, Greddy Intake manifold, E-manage blue, i have no a/c or p/c. im jus waiting to get 740cc injectors.

you shoukd make a little more with that intake manifold throw in some 264 Cams and you should be pretty close if not hit 400

djcobra · 01-01-2009, 05:24 PM

I have to say those are nice Numbers, especially with stock cams. However, i still can't believe it... Were these numbers from the 'Dynojet' ?

My car put down ~330whp with 302 wtq at 15-16 psi.

Supporting mods include:

S14 Kouki SR20DET Motor (stock bottom)
GT28RS
HKS Step 2 Cams 256in/264ex
HKS Step 2 Valve Springs
HKS 555cc injectors
Peakformance Retainers
Apexi 1.1mm Headgasket
Splitfire Ignition System
Z32 MAF
Power FC
SARD FPR
RPS Max Street Clutch

and all that other crap... Mind you my turbo is just a lil smaller than yours... Anyways, nice numbers.

Steve.

S13 curtis · 01-01-2009, 05:45 PM

Quote:

Originally Posted by djcobra

I have to say those are nice Numbers, especially with stock cams. However, i still can't believe it... Were these numbers from the 'Dynojet' ?

My car put down ~330whp with 302 wtq at 15-16 psi.

Supporting mods include:

S14 Kouki SR20DET Motor (stock bottom)
GT28RS
HKS Step 2 Cams 256in/264ex
HKS Step 2 Valve Springs
HKS 555cc injectors
Peakformance Retainers
Apexi 1.1mm Headgasket
Splitfire Ignition System
Z32 MAF
Power FC
SARD FPR
RPS Max Street Clutch

and all that other crap... Mind you my turbo is just a lil smaller than yours... Anyways, nice numbers.

Steve.

Crank that shit up to 20 pounds, you will see the difference, prolly 360+ whp

djcobra · 01-01-2009, 07:44 PM

I'm going to pretend that I didn't read your post 'S13 curtis' boosting over 18 psi on this turbo is just plain stupid and not to mention out of efficiency range.

Steve.

BiG MiKE86 · 01-02-2009, 06:48 AM

Well boyz I just changed out my Fuel pump because it started screaming like crazy - Im hoping this fixes my previous problem of not being able to go past 15psi - because I noticed as the pump got worse the level of boost I could hit got lower and lower - Back to the dyno! O and nice numbers Sileighty 85 - thats sweetness man goodluck

S13 curtis · 01-06-2009, 08:18 AM

Looks like this guy got Cody Ace beat,Zilvia member.
.86 users please drool

http://zilvia.net/f/cars-sale/123696...pics-pics.html

Traped 124mph in a S14 chassis.

drftmark · 01-28-2009, 05:31 PM

I made 260whp and I *think* 248tq (don't have the graph next to me) at 16 psi. Does this seem low to anybody? It was on a Dyno Dynamics - I know its the heatbreaker dyno but I was just wondering.

s15 sr
JE forged pistons
HKS step 1 256/256 cams *Eliminated VTC* (was this a mistake? should I buy a 256 intake cam that I can put the VTC back on?)
Stock exhaust mani
3in turbo elbow + dowpipe + exhaust *no cat*
apexi FMIC
sard 850cc's
gt2781r .86

Questions:
1)Does this seem low?
2)would VTC make me see a bigger gain?

*slider2828* · 01-28-2009, 05:34 PM

Yes that seems very low on a .86 GT2871R... What ECU you using? WHo is tuning for you

drftmark · 01-28-2009, 05:35 PM

Quote:

Originally Posted by slider2828

Yes that seems very low on a .86 GT2871R... What ECU you using? WHo is tuning for you

Opps forgot to include that

Its a Haltech E8

A reputable shop with a good tuner tuned it.

JeremyR · 01-28-2009, 05:37 PM

jesus thats like 100hp too low for the setup you have...

stock s15 sr makes like what 250ish??

somethings wrong...

drftmark · 01-28-2009, 05:43 PM

I am thinking my piston rings could be blown. OR when I had the engine rebuilt the shop could have ordered different size CR on the JE pistons. BUT I don't think they messed up.

ALSO note this was on a dyno dynamics

fromxtor · 01-28-2009, 05:46 PM

My motor is almost done(just need to install cams etc), and I cant wait to drop this bitch in the car. I also have a spare block I am going to get hot tanked, honed, re-surfaced, for a more agressive setup later after my driving skill improves.

*slider2828* · 01-28-2009, 07:19 PM

Quote:

Originally Posted by drftmark

I am thinking my piston rings could be blown. OR when I had the engine rebuilt the shop could have ordered different size CR on the JE pistons. BUT I don't think they messed up.

ALSO note this was on a dyno dynamics

Check your compressions.... wow at 16psi... still low...

BiG MiKE86 · 01-29-2009, 07:36 AM

Quote:

Originally Posted by drftmark

I made 260whp and I *think* 248tq (don't have the graph next to me) at 16 psi. Does this seem low to anybody? It was on a Dyno Dynamics - I know its the heatbreaker dyno but I was just wondering.

s15 sr
JE forged pistons
HKS step 1 256/256 cams *Eliminated VTC* (was this a mistake? should I buy a 256 intake cam that I can put the VTC back on?)
Stock exhaust mani
3in turbo elbow + dowpipe + exhaust *no cat*
apexi FMIC
sard 850cc's
gt2781r .86

Questions:
1)Does this seem low?
2)would VTC make me see a bigger gain?

I think that does seem a bit low... I made 330/298 @ 15psi on a similar setup (S13 + 256/256) GT2871r .64

Start Troubleshooting.. goodluck

Sleepy240 · 01-29-2009, 09:31 AM

Quote:

Originally Posted by BiG MiKE86

I think that does seem a bit low... I made 330/298 @ 15psi on a similar setup (S13 + 256/256) GT2871r .64

Start Troubleshooting.. goodluck

See whats weird and I see all these numbers and my car doesn't make nearly what i think it should then...

S13 Redtop
gt2871r 64ar
550cc Sards
264/264 BC
Retainers/Springs/Valves
New Rods/Piston/Rings blah blah
3" Catback/downpipe etc
Tial 44mm External Gate
Bored/Honed Stock Mani
FMIC
Enthalpy Tune

@ 22psi I only made 335 HP // 305 TQ

drftmark · 01-29-2009, 11:52 AM

^ I am in the same boat. Just a wtf moment.

drftmark · 02-01-2009, 01:09 AM

Here are my dyno sheets. My compression is 140/130/140/140, so my second cylinder is a little iffy. I put some oil in it and it went up to like 180+.

Here is the HP/TQ

PSI

AFR

12-02-2008, 07:23 AM	#722
s15specR Zilvia FREAK! Join Date: Oct 2007 Location: USA Posts: 1,021 Trader Rating: (18) Feedback Score: 18 reviews	I was told by a local garrett dealer that 22-23psi is pushing it on the gt2871r, also the GT30 carries the same shaft as these and should be ran no more than 22-23 as well. __________________

12-02-2008, 07:55 AM	#723
smelly240 Nissanaholic! Join Date: Oct 2006 Location: Philaburbia Age: 43 Posts: 2,137 Trader Rating: (4) Feedback Score: 4 reviews	25 is easily doable on a 3071r... its well within the compressor efficiency. __________________ HREs on a S13 - check, 6262 - check, Girlfriend.... - nope

12-12-2008, 09:56 PM	#725
jakerps13 Zilvia Member Join Date: Nov 2003 Location: Appleton, WI Age: 37 Posts: 171 Trader Rating: (0) Feedback Score: 0 reviews	Anyone running the t3 yet? __________________ Lower than a pornstar's morals.

01-01-2009, 10:16 AM	#726
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Just got Mine Dyno'd yesterday, no dyno chart yet I have to drive back to Al, since I couldnt get it tuned before I left (fucken UPS) but Made 363whp and 332ft-lbs Torque on Stock Cams @ 1.5bar My tuner says it feels faster than 360, so im excited i cant wait to feel the power >_< GT2871R .64 PowerFC W/Boost controller Z32 MAF Splitfire Ignition System Crankshaft Polished and Balanced Pulsar GTI-R Main Crank Bolts Nismo Main Crank Bearings Tomei Micro-Finished Con-Rod Bearings Eagle H Con-Rods Wiseco Pistons Power Enterprise 1.5 mil Metal H/G ARP Head Studs Brian Crower Valve Springs with Titanium Retainers Peak Performance Tubular Manifold Greddy Type-R BOV Greddy Front Mount Intercooler RSR Turbo Back Exhaust OS Giken Twin Plate Clutch ect... __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

01-01-2009, 12:28 PM	#729
usdm180sx Post Whore! Join Date: Dec 2005 Location: 562 Posts: 4,807 Trader Rating: (5) Rides Gallery: usdm180sx Feedback Score: 5 reviews	Snap. Do you have a/c? __________________ -Norm!

01-01-2009, 10:56 AM	#727
NewS13Guy Zilvia Addict Join Date: Jan 2008 Location: Charlotte NC Age: 36 Posts: 667 Trader Rating: (13) Feedback Score: 13 reviews	^ pics of engine bay??

01-01-2009, 04:31 PM	#731
S13 curtis Zilvia Addict Join Date: Jun 2008 Location: Orlando,FL Age: 30 Posts: 651 Trader Rating: (13) Feedback Score: 13 reviews	Holy Shit, 363whp on stock cams... How high is your compression?

01-01-2009, 05:03 PM	#733
S13 curtis Zilvia Addict Join Date: Jun 2008 Location: Orlando,FL Age: 30 Posts: 651 Trader Rating: (13) Feedback Score: 13 reviews	i also have a 2871r sr20 red top, i'm still on stock cams. you jus made me wanna see what mine will put out on stock cams.lol only difference is i have apex 1.1mm, stock internals, Greddy Intake manifold, E-manage blue, i have no a/c or p/s. im jus waiting to get 740cc injectors. Last edited by S13 curtis; 01-02-2009 at 02:14 PM..

01-01-2009, 05:24 PM	#735
djcobra Zilvia Junkie Join Date: Aug 2006 Location: Calgary Age: 42 Posts: 306 Trader Rating: (1) Feedback Score: 1 reviews	I have to say those are nice Numbers, especially with stock cams. However, i still can't believe it... Were these numbers from the 'Dynojet' ? My car put down ~330whp with 302 wtq at 15-16 psi. Supporting mods include: S14 Kouki SR20DET Motor (stock bottom) GT28RS HKS Step 2 Cams 256in/264ex HKS Step 2 Valve Springs HKS 555cc injectors Peakformance Retainers Apexi 1.1mm Headgasket Splitfire Ignition System Z32 MAF Power FC SARD FPR RPS Max Street Clutch and all that other crap... Mind you my turbo is just a lil smaller than yours... Anyways, nice numbers. Steve. __________________ S14 326 whp, 311 tq @ 15 psi HKS F-CON V-PRO Last edited by djcobra; 01-01-2009 at 05:28 PM.. Reason: add to list...

01-01-2009, 07:44 PM	#737
djcobra Zilvia Junkie Join Date: Aug 2006 Location: Calgary Age: 42 Posts: 306 Trader Rating: (1) Feedback Score: 1 reviews	I'm going to pretend that I didn't read your post 'S13 curtis' boosting over 18 psi on this turbo is just plain stupid and not to mention out of efficiency range. Steve. __________________ S14 326 whp, 311 tq @ 15 psi HKS F-CON V-PRO

01-02-2009, 06:48 AM	#738
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Well boyz I just changed out my Fuel pump because it started screaming like crazy - Im hoping this fixes my previous problem of not being able to go past 15psi - because I noticed as the pump got worse the level of boost I could hit got lower and lower - Back to the dyno! O and nice numbers Sileighty 85 - thats sweetness man goodluck __________________

01-06-2009, 08:18 AM	#739
S13 curtis Zilvia Addict Join Date: Jun 2008 Location: Orlando,FL Age: 30 Posts: 651 Trader Rating: (13) Feedback Score: 13 reviews	Looks like this guy got Cody Ace beat,Zilvia member. .86 users please drool http://zilvia.net/f/cars-sale/123696...pics-pics.html Traped 124mph in a S14 chassis.

01-28-2009, 05:31 PM	#740
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	I made 260whp and I think 248tq (don't have the graph next to me) at 16 psi. Does this seem low to anybody? It was on a Dyno Dynamics - I know its the heatbreaker dyno but I was just wondering. s15 sr JE forged pistons HKS step 1 256/256 cams Eliminated VTC (was this a mistake? should I buy a 256 intake cam that I can put the VTC back on?) Stock exhaust mani 3in turbo elbow + dowpipe + exhaust no cat apexi FMIC sard 850cc's gt2781r .86 Questions: 1)Does this seem low? 2)would VTC make me see a bigger gain?

01-28-2009, 05:34 PM	#741
slider2828 Premium Member Join Date: Oct 2004 Location: San Francisco, CA Posts: 5,824 Trader Rating: (13) Feedback Score: 13 reviews	Yes that seems very low on a .86 GT2871R... What ECU you using? WHo is tuning for you __________________ Turn and Burn!

01-28-2009, 05:43 PM	#744
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	I am thinking my piston rings could be blown. OR when I had the engine rebuilt the shop could have ordered different size CR on the JE pistons. BUT I don't think they messed up. ALSO note this was on a dyno dynamics

01-28-2009, 05:46 PM	#745
fromxtor Post Whore! Join Date: Aug 2005 Location: NC Age: 40 Posts: 3,012 Trader Rating: (23) Feedback Score: 23 reviews	My motor is almost done(just need to install cams etc), and I cant wait to drop this bitch in the car. I also have a spare block I am going to get hot tanked, honed, re-surfaced, for a more agressive setup later after my driving skill improves. __________________ Seller feedback>>http://www.zilvia.net/f/showthread.p...light=fromxtor

01-29-2009, 11:52 AM	#749
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	^ I am in the same boat. Just a wtf moment.

02-01-2009, 01:09 AM	#750
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	Here are my dyno sheets. My compression is 140/130/140/140, so my second cylinder is a little iffy. I put some oil in it and it went up to like 180+. Here is the HP/TQ PSI AFR

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode