cold air is good but h2o is bad - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Silvia716 · 02-21-2011, 12:13 PM

So I'm putting a custom cold air on my s14 that is going to come out the front bumper the only thing is this is going to be my daily driver come spring and I don't want it to suck up any water any ideas

Banana_Cute · 02-21-2011, 12:18 PM

dont put cold air intake.

or relocate your battery and using a intercooler top half piping, relocate your intake/maf on passenger side with the filter under the engine bay but not low enough water can get to it. and keeping the factory splash guards helps.

EDT007 · 02-21-2011, 12:26 PM

AEM sells a unit which is basically a coupler but would not allow water to be injested but instead would allow the air to come in from the outside in the event you were to suck some in. Read about it. Hope this helps. You can by one depending on what diamater you need. Goodluck.

AEM Air Bypass Valve for Cold Air Intakes - Prevents Hydro-lock

Propaganda · 02-21-2011, 12:56 PM

or... just get a hose in front of your car pointed towards your intake...

lucas13dourado · 02-22-2011, 12:00 PM

Quote:

Originally Posted by Propaganda

or... just get a hose in front of your car pointed towards your intake...

we have a winner

Silvia716 · 02-21-2011, 01:21 PM

Think I'm gonna go with that by pass valve

02-21-2011, 12:13 PM	#1
Silvia716 Zilvia Junkie Join Date: Aug 2010 Location: buffalo ny Posts: 302 Trader Rating: (1) Feedback Score: 1 reviews	cold air is good but h2o is bad So I'm putting a custom cold air on my s14 that is going to come out the front bumper the only thing is this is going to be my daily driver come spring and I don't want it to suck up any water any ideas

02-21-2011, 12:18 PM	#2
Banana_Cute Zilvia FREAK! Join Date: Jan 2011 Location: Irvine, So. Cal. Posts: 1,338 Trader Rating: (16) Feedback Score: 16 reviews	dont put cold air intake. or relocate your battery and using a intercooler top half piping, relocate your intake/maf on passenger side with the filter under the engine bay but not low enough water can get to it. and keeping the factory splash guards helps. __________________ Simplicity is the key to brilliance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-21-2011, 12:26 PM	#3
EDT007 Zilvia Addict Join Date: Feb 2008 Location: NJ Age: 39 Posts: 617 Trader Rating: (8) Feedback Score: 8 reviews	AEM sells a unit which is basically a coupler but would not allow water to be injested but instead would allow the air to come in from the outside in the event you were to suck some in. Read about it. Hope this helps. You can by one depending on what diamater you need. Goodluck. AEM Air Bypass Valve for Cold Air Intakes - Prevents Hydro-lock

02-21-2011, 12:56 PM	#4
Propaganda Zilvia Junkie Join Date: May 2005 Location: Charleston, SC Age: 34 Posts: 451 Trader Rating: (10) Feedback Score: 10 reviews	or... just get a hose in front of your car pointed towards your intake...

02-21-2011, 01:21 PM	#6
Silvia716 Zilvia Junkie Join Date: Aug 2010 Location: buffalo ny Posts: 302 Trader Rating: (1) Feedback Score: 1 reviews	Think I'm gonna go with that by pass valve