Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 07-30-2009, 12:55 AM   #1
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
Thumbs up Nistune information guide - How tos, a guide for you

Nistune informative thread First off I, and a few others are working on this together to help you get started with nistune. For those of you who don't know anything about nistune,

NIStune is a real-time tuning suite designed especially for Nissans which provides the ability to:
  • Retune factory Nissan Engine Control Units (ECU)
  • Monitor gauges and map tracing on your ECU
  • Data log from your ECU using consult, wideband and auxiliary inputs
  • Perform playback using graphs, gauges and map tracing
It provides:
  • Connectivity for up to two emulators simultaneously (Pocket Romulator and Moates Ostrich)
  • Loads and Saves files in regular and odd/even formats for chip burning (EPROM/FLASH)
  • Support for up to two simultaneous wideband units (various commercial units supported)
  • Communication to our specially developed NIStune Real-time boards to perform real-time tuning
Features:
  • Real time tuning, map tracing, logging and playback
  • Consult display capabilities with real time diagnostic information in a separate window
  • Full Log Recording and playback is available for all consult variants.
  • Dual channel Wide Band support
  • Wideband can also be recorded inline with consult data and played back.
  • Edit five ROM images simulatenously, with comparison capabilities
  • Map and table copy feature
  • Intelligent display tables decoded for easy modification
  • Completely editable multi window grid, map/table views
  • Knock cells highlightable, pinpoint map trace configurable for follow and trail functionality, cell marking available
  • Resize injectors and change AFM capabilities
  • Real time RAM monitoring system
  • AFR and auxillary input trace against RPM and load
  • Hardware and software installation guides and manuals provided
over the next month or so, I will be documenting the process of installation, and tuning with nistune on my J4 ecu sr20DET, you will learn that you too can make reliable power with out breaking the bank....

Rules for posting in this thread:
please if you are going to post here, please keep it on the topic, this is a thread created to educate you about nistune, the installation process, tuning process, and the experience i am going through getting it all done.

If you have a problem with your nistune feel free to post a question.

If you have something to post about some other tuning program, standalone, this thread is about nistune only please start your own thread.


Stay tuned......

dcperformance.com --socal's authorized nistune Shop
__________________

handinpants is offline   Reply With Quote
Sponsored Links
Old 07-30-2009, 12:58 AM   #2
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
hexdmy

Join Date: Apr 2009
Location: Los Angeles
Posts: 4
Trader Rating: (0)


Ok, so back to the INFORMATIVE part of this thread, t

So here goes my first Nistune installation:

Stock ecu

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Removing the conformal coating in preparation for de-soldering (note: the conformal coating will get on you fingers) with lacquer thinner.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

After cleaning with lacquer thinner to remove conformal coating, I used alcohol to remove residue.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

I applied a strip of flux to make it easier to de-solder the holes on the ecu board. The guys at Nistune encourage people to be very careful here during the de-solder process as the traces on the ecu are very fragile.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Using the HAKKO de-soldering tool, I think it would be difficult to use a manual solder sucker that you might find at Radio Shack, or at least I have not had good luck with those devices in the past.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Here I'm inserting the ribbon cable into the board, this requires a little patience as the cable required a bit of wiggling to get all of the little wire to go through the board at the same time.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Nistune recommends tack soldering the cable on this side first to hold it in place before flipping the ecu over and soldering all of the connections.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Soldering all of the connections, for those that don't do a lot of soldering, it is very important to keep your soldering tip clean with a wet sponge during the soldering process.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

I know this picture does not really show it, but I'm looking for nice even solder joints that have a nice shinny appearance. If the solder joint looks dull or matte , you may want to flux and re-flow that solder connection.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

The last soldering step is to remove the resistor at position R021 to position R020, this tells the ecu to access the Nistune board instead of the normal ROM.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Fitting the type 4 Nistune board, there was conformal coating in two of the screw holes, so I used a dab of lacquer thinner to soften the coating, and the screws went right in.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

Done ! Hope to test it on Steve's car tomorrow.

This image has been resized. Click this bar to view the full image. The original image is sized 800x537.

click here to see video of it hooked up in handinpant's car http://www.youtube.com/watch?v=An1NhPvQMRM


handinpants is offline   Reply With Quote
Old 07-30-2009, 01:10 AM   #3
GSXRJJordan
Post Whore!
 
GSXRJJordan's Avatar
 
Join Date: May 2006
Location: << 626 >>
Posts: 9,135
Trader Rating: (19)
GSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to GSXRJJordan
Sweet, can't wait to see more. I'm looking for a 92-94 VG30DE Maxima ECU for my RB25 to go Nistune on towards the end of the year, glad there's a shop here in Socal that's takin it up!
__________________


Jordan Innovations has a new web site!
www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com
GSXRJJordan is offline   Reply With Quote
Old 08-03-2009, 09:53 AM   #4
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
numbers are in:
I went from a baseline of 219whp and 227 wheel torque
ended up with 268whp and 277wheel torque. Tuned on DC performance's Dynapak setup. videos and pics will be posted shortly.
__________________

handinpants is offline   Reply With Quote
Old 08-03-2009, 12:52 PM   #5
TheWolf
Zilvia FREAK!
 
TheWolf's Avatar
 
Join Date: Aug 2005
Location: Orange Park, FL (Jax)
Posts: 1,468
Trader Rating: (0)
TheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant futureTheWolf has a brilliant future
Feedback Score: 0 reviews
so you made 49HP and 50ftlbs with just changing the ECU and not changing the boost?
__________________
Eye on the Prize
TheWolf is offline   Reply With Quote
Old 08-03-2009, 02:21 PM   #6
hexdmy
 
Join Date: Apr 2009
Location: Los Angeles
Posts: 17
Trader Rating: (0)
hexdmy is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by TheWolf View Post
so you made 49HP and 50ftlbs with just changing the ECU and not changing the boost?
We did increase the boost, I'm not sure how much of the power gains were from the boost increase, but I can tell you that the previous tune, that the car came in with, was not optimal for Steve's setup. Specifically, it was very rich, which was causing drivability issues, and the load scaling (TP or theoretical pulse width) was not setup correctly with the MAF/injector combination that was installed on the car. Basically we were running to the end of the timing and target afr lookup tables well before our target boost levels. So whether we were running 8 psi boost or 18, our timing values remained constant, which is not a good thing. Because the car was running so rich, it has some very noticeable drivability issues (ie misfiring) , that were not nearly as oblivious on the dyno, as on the road. Below are the power graphs and aft/boost graph.



hexdmy is offline   Reply With Quote
Old 08-03-2009, 08:35 PM   #7
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
What boost controller are you using? The boost spike and then sudden dip shows that it isnt reacting fast enough. Usually dips at your peak tq area are alarming but it can be seen by the map logging that your boost controller is at fault for that. Never the less it can make tuning difficult because its hard to tell the difference between too much timing and pressure drop from the sudden wastegate opening.

Do you have a gain control on your boost controller?

Im not trying to be negative, the rest of the graph looks smooth. I just think the car will feel more controllable and more powerful if this small detail can be overcome.

The boost controller seems to settle down just fine too after max boost is reached so I dont think its a solenoid problem, I think its most likely a setting on the controller itself.
4x4le is offline   Reply With Quote
Old 08-03-2009, 08:48 PM   #8
silly_13
Zilvia Addict
 
silly_13's Avatar
 
Join Date: Aug 2008
Location: Los Angeles
Age: 32
Posts: 773
Trader Rating: (2)
silly_13 will become famous soon enoughsilly_13 will become famous soon enoughsilly_13 will become famous soon enoughsilly_13 will become famous soon enough
Feedback Score: 2 reviews
nice write up steven!
silly_13 is offline   Reply With Quote
Old 08-05-2009, 02:44 AM   #9
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
i have a blitz dual sbc spec s, with the gain set at 25, and the boost setting at 65. before gain was set at 20 or 25, and boost setting was at 50. but still whoever designed the blitz dual sbc made it very confusing, and not very user friendly. i am happy with the gains, but still not sure how the heck the boost controller is supposed to function..... any input?" and yeah the old tune was a rom tune, like the kind you send your ecu to and they tune it based on their tune, then expect it to produce the same results in someone elses car..... but thats another story, i am happy as hell at the results i am getting way better gas mileage per tank, though my rear tires aren't very happy...
__________________

handinpants is offline   Reply With Quote
Old 08-14-2009, 07:39 PM   #10
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
video posted

hey i wanted to post up this video

YouTube - Nissan 180sx
__________________

handinpants is offline   Reply With Quote
Old 08-14-2009, 09:53 PM   #11
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
After playing with a Nis-Tune unit for a customer I have these main reservations still...


1. The unit will not allow Real Time tuning as is
2. The unit will not allow you to actually tune the map if you install the software more than 3 times. That means if you buy this product and you have a systems crash and you own more than three computers which many now do you are totally SOL.
3. The unit does not allow you to adjust while the car is running. You have to Image the map and then "burn" it to the eprom, this is not a standalone unit. This is the definition of a reprogrammable chip just as I thought.
4. The layout of and the ergonomics of the maps and adjustments are very generic or confusing and not very clear compared to FC Data logit for Power FC or Haltech Software. There is much more room for improvement.
Some of the descriptions and adjustments do not even use the standard Vocabulary that most EFI universities or engineering schools refer to in some cases.

That being said It is still a cool unit. However once it is all said and done the cost of the unit is almost as much as a Power FC, which you CAN tune in read time using fc logit or the provided software, you can map trace IN REAL TIME and you do not need to use an outside EMULATOR or additional ghost unit to tune the car in real time.

REAL TIME TUNING: Tuning while the engine in running and watching the power, EGT, knock and AFR in REAL TIME and adjusting a given cell in the MAP while the car is running, under power on the dyno, rolling to see IMMEDIATE results and to adjust accordingly over and over in steady state to fine tune every single cell

Most believe real time tuning is simply tuning the car while the engine is running...NOT SO

That is not true real time function adjustment...Haltech is the one who pioneered this and for Nissan the PFC is a more affordable way to do this with the FC Datalogit because you can adjust a cell and hit "write all" over and over while running and on the dyno for the same effect...

If I am missing something I apologize but it doesnt seem like this is possible for just the cost of the Regular old Nistune setup!

Unless you have dyno tuned cars you would not really understand why this is soo important to truly get the most out of the unit.

If someone could address the emulator and software license issue I still believe this package is overpriced by about 100-150 dollars just purely on the fact you have to image the rom and are not actually re-programming the actual computer.

Before anyone goes into a fit, these are VERY VALID concerns when one is evaluating price and the true capabilty of the unit they are buying. The consult and logging abilities of Nistune are great but when you are buying a REPROGRAMMABLE Engine Management unit the number one focus should be how does this product meet my needs to get the most out of my engine during the actual process of TUNING. This was much less impressive than I was expecting it to be and I don't really see how it is a "better deal" when you can get a used power fc in many cases for a couple hundred dollars less than this

Please answer these questions

1. explain exactly how to tune the unit in Real Time without using an Emulator or external side ecu. As in real time I am rolling on the Dyno Dynamics watching tractive effort and I need to raise or lower timing value in real time to see tractive effort go up or down so I can tune in steady state...

2. explain how to handle the software issue because nistune still has not allowed the consumer software to be free and fully downloadable.

3. Also explain the refresh rate of the "Target AFR" function...target AFR mapping is notorious even on highly advanced quick refresh units like Haltech to be AWEFUL. This is not "tuning" and typically the ecu will over correct or undercorrect and this causes sporadic high temperature period in the engine leading eventually to valve sealing seating issues, hot spots in the combustion chamber and cracked exhaust manifolds (very common)...I would not suggest using this function on the Nis-Tune if you have one. You should edit raw values but you will need to do this IN REAL TIME to really get each cell right....

I am happy to answer and questions of members regarding my experience with the unit and my reservations.

Again I do not sell any hardware and do not have an personal relationships with any company that sells hardware or units. I am purely a weekend dyno tuner with a very specific specialty (Nissan and BMW EFI).

Thanks
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Old 08-15-2009, 03:19 PM   #12
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
Steve, if you were using an emmulater and you didnt have real time capabilitys you were not using a real full nistune setup. Pm me you number and i will give you a call sunday and i will explain stuff to you. Your consirns with this setup still seem whack because you still are yet to deal with an ecu that has been modified properly with nistune.
4x4le is offline   Reply With Quote
Old 08-15-2009, 04:37 PM   #13
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
A real full purpose EMS/Standalone writes directly to the unit...

If you require an external emulator to do real time tuning you have made my point. This is a rom modification unit not a Standalone EMS

Explain the total costs for a full NisTune setup with an emulator vs. without it?

I think this information should be released to the whole forum not just me direct.

Is there any way to tune Nis-Tune in Real time without using a special emulator

The above explanations don't mention emulators
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Old 08-15-2009, 10:25 PM   #14
sidewaysstarion
 
sidewaysstarion's Avatar
 
Join Date: Nov 2005
Location: Torrance, CA
Age: 35
Posts: 32
Trader Rating: (0)
sidewaysstarion is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to sidewaysstarion
Steve, If you open your eyes you will see Chris soldering in the INTERNAL emulator. which referred to as the NISTUNE board. this has been released to the forum as a whole, do us all a favor go ask your doctor for a rectal cranial extraction then read through this thread before you post next time, I'm pretty sure handinpants and hexdmy are tired of cleaning up your idiotic posts.

Also just an FYI only recently has HALTECH started doing 02 reference traget AFR, But you would know that because your an expert Haltech tuner

So do us all a favor and stick to your mail order powerfc base maps and leave the tuning to the REAL experts with REAL dynos.

[/]
__________________
Only Shady Tuners Work in the Shadows
sidewaysstarion is offline   Reply With Quote
Old 08-15-2009, 10:40 PM   #15
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
Quote:
Originally Posted by sidewaysstarion View Post
Steve, If you open your eyes you will see Chris soldering in the INTERNAL emulator. which referred to as the NISTUNE board. this has been released to the forum as a whole, do us all a favor and pull your head out of your ass and read through this thread before you post next time, I'm pretty sure handinpants and hexdmy are tired of cleaning up your idiotic posts.

I understand this also but on Nis Tune's own site it suggests you use an external emulator board...

Also just an FYI only recently has HALTECH started doing 02 reference traget AFR, But you would know that because your an expert Haltech tuner

Yes I know this and I suggest everyone DOES NOT USE THIS. The reason why haltech added this feature is purely for marketing against the AEM unit. The platinum and brand new Haltech units have a much more advanced and higher sample rate version of this option which is OK but I still recommend against it. You must do real steady state dyno tuning to watch tractive effort and get the best possible cylinder pressure

So do us all a favor and stick to your mail order powerfc base maps and leave the tuning to the REAL experts with REAL dynos.

The base map service is to help others who do not have good or local dyno shops available, most of my business is Dyno tuning? Have you seen my site? Not exactly sure what you are talking about on this comment...

[/]
Again, the license issue is what holds back many of my customers who have mulitple computers that they would like to use with their unit from going with Nis-tune. I believe this software should be given to any paying customer for free with much more than limiting to only 3 computers.

On the issue of the emulator ON-BOARD, I would like someone to show the real time tuning in steady state in a video if possible...

If I can unlock the software for my customers car I will happily post a video of me doing it on my dyno once I can get access to that portion of the unit.
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Old 08-15-2009, 11:01 PM   #16
sidewaysstarion
 
sidewaysstarion's Avatar
 
Join Date: Nov 2005
Location: Torrance, CA
Age: 35
Posts: 32
Trader Rating: (0)
sidewaysstarion is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to sidewaysstarion
Quote:
Originally Posted by steve shadows View Post
Again, the license issue is what holds back many of my customers who have mulitple computers that they would like to use with their unit from going with Nis-tune. I believe this software should be given to any paying customer for free with much more than limiting to only 3 computers.

On the issue of the emulator ON-BOARD, I would like someone to show the real time tuning in steady state in a video if possible...

If I can unlock the software for my customers car I will happily post a video of me doing it on my dyno once I can get access to that portion of the unit.

Well maybe there is a reason why they sell a dealers license? so maybe people can tune Multiple ecus?

Also they do give a FREE version to the PAYING customers, as crazy as it sounds its true. Hexdmy paid for a dealers license and they gave him a FREE unlimited version of the software.

The reason why they sell the software is because you can use it with hardware other than their own. so if you wanted you could use a third party external emulator to build a map and then burn it to a chip and sell it. but you could also buy the nistune board which has an on board eeprom and an on board emulator which supports live tuning and live map tracing, all done through the stock consult connector.

why would someone bring their car to you to tune their nistune if you haven't even read the documentation? Please do you homework before someone winds up having to rebuild a motor.

ALL OF THE INFORMATION I HAVE POSTED WAS PROVIDED IN THE NISTUNE DOCUMENTATION THAT IS AVAILABLE ON THEIR WEBSITE FOR FREE!!!

Incase you can't use google, here is a link http://www.nistune.com/documentation.html personally Steve for you I would start with http://www.plmsdevelopments.com/file...ing_basics.pdf
__________________
Only Shady Tuners Work in the Shadows

Last edited by sidewaysstarion; 08-15-2009 at 11:33 PM..
sidewaysstarion is offline   Reply With Quote
Old 08-16-2009, 02:01 AM   #17
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
Quote:
Originally Posted by steve shadows View Post
Again, the license issue is what holds back many of my customers who have mulitple computers that they would like to use with their unit from going with Nis-tune. I believe this software should be given to any paying customer for free with much more than limiting to only 3 computers.

On the issue of the emulator ON-BOARD, I would like someone to show the real time tuning in steady state in a video if possible...

If I can unlock the software for my customers car I will happily post a video of me doing it on my dyno once I can get access to that portion of the unit.

I talked on the phone with this guy, I have no real clue what is going on but there is something screwy going on. His software license was not bought new, but was tried to have been transfered and they are not supposed to be transfered so that may have been picked up on, however I dont think they have safeguards against that.... Somewhat stumpped. I can assure you I have never had a customer that bought the software and board and had It installed by us have never had an issue like this.

And there is no need for a emmulator with nistune, if there is a nistune board, not a cheap chipped daughter board but an actual type 1-3 board there is no need for a emmulator, just a usb or consult cable. The tuning can be done in real time too, live, the changes are made instantly, the car dont have to be shut off, the burn button does not need to be pressed, the results are instant. You can see the vid that hand in pants posted (the one that said not to be confused with any other steve lol) the fuel map with map trace happening. That is showing the puslewidth of the injectors and what part the ecu is pulling from, and you can click on any of them and make a change instantly at any time.

Now if your in streaming mode which makes the program act allot faster the tuning is a little less real time if you will but that is a different discussion.

Either way, I still think you shouldn't (and no one should) so much as think about touching a nistune setup until they have read all the documentation that is available.
Steve, that could have saved one of your customers 3 hours of dyno time couldnt it have?
4x4le is offline   Reply With Quote
Old 08-16-2009, 01:00 PM   #18
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
I vote lets keep the thread clean, it may take a while but he will be educated If I can help it.

Now I did have someone call me that was having all sorts of wierd problems but he purchased the ecu and software (which isnt supposed to be transfered) from someone other than a nistune shop. Its hard to figure out what all is going on with that situation but that is the one and only time Steve Shadows had a chance to mess with Nistune. No wonder he hates it.
4x4le is offline   Reply With Quote
Old 08-16-2009, 05:28 PM   #19
GSXRJJordan
Post Whore!
 
GSXRJJordan's Avatar
 
Join Date: May 2006
Location: << 626 >>
Posts: 9,135
Trader Rating: (19)
GSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to GSXRJJordan
Live tuning is not the same as REAL TIME. Emulation + being able to write the ROM is not the same as the ECU making changes while loaded on the dyno. That's Steve's beef, among other things it seems.

I agree that Nistune has to present a significant price/performance advantage to make it preferable to the other "big names" in the industry.

I'm watching to see how this sorts itself out.
__________________


Jordan Innovations has a new web site!
www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com
GSXRJJordan is offline   Reply With Quote
Old 08-17-2009, 03:36 AM   #20
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
Quote:
Originally Posted by GSXRJJordan View Post
Live tuning is not the same as REAL TIME. Emulation + being able to write the ROM is not the same as the ECU making changes while loaded on the dyno. That's Steve's beef, among other things it seems.

I agree that Nistune has to present a significant price/performance advantage to make it preferable to the other "big names" in the industry.

I'm watching to see how this sorts itself out.
Yes it is, but I will report back once I use this unit again and tell you guys if it actually does allow real time tuning in the sense of the way that Haltech does.

The main beef I have, however, is that there is not a fully downloadable and openly accessible software for the DIY'er or customer...

The fact that they sell licenses just does not line up with all other main stream class A standalone systems. I don't really see how keeping it this way makes it any easier on the community or the customers either...

Quote:
Originally Posted by 4x4le View Post
Newest info from [email protected]

The error message the user had (that steve shadows was going to tune the car for and had trouble with) has opened too many address files looking around at stuff, or its possible that the person he bought the license from has done this. Since this is a single user license and the software detected that it was being used commercially (or so it seemed) it had shut itself down.

Matt gave me instructions for me to pass on to the current license holder in order to make the program work correctly once again.
Excellent, thank you.

I will report back into this thread with a full review of the unit once I get to really try Real Time steady state tuning with it.
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Old 08-16-2009, 06:01 PM   #21
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 35
Posts: 15,080
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
i see it as this, a PFC unit for a CA18 cost pretty much double for me then u SR Rb gents...and thats with out controller usually, im not going for huge numbers...300 and im good, Nistune will get me where i need to be and itll be safer then a chip...

when i get my car done ill see war happens wen it happens
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 08-16-2009, 08:38 PM   #22
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
Newest info from [email protected]

The error message the user had (that steve shadows was going to tune the car for and had trouble with) has opened too many address files looking around at stuff, or its possible that the person he bought the license from has done this. Since this is a single user license and the software detected that it was being used commercially (or so it seemed) it had shut itself down.

Matt gave me instructions for me to pass on to the current license holder in order to make the program work correctly once again.
4x4le is offline   Reply With Quote
Old 08-19-2009, 07:31 PM   #23
GSXRJJordan
Post Whore!
 
GSXRJJordan's Avatar
 
Join Date: May 2006
Location: << 626 >>
Posts: 9,135
Trader Rating: (19)
GSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to GSXRJJordan
Brandon, thanks for getting Matt's input back to us! Sounds like Steve had a bad license/unit, and that the Nistune really does offer us the best value. The "Target AFR" function with a quick wideband sounds like a great option for 'basemaps' for people that can't make it directly to a dyno ~ I agree that the feature is a plus, even if the most advanced tuners wouldn't use it.

To clarify - the Type 4 board will work on a ECR33 ECU? Would it be any easier/better if I used a VG30DE VVT (like the Maxima discussed earlier in this thread) ECU?
__________________


Jordan Innovations has a new web site!
www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com
GSXRJJordan is offline   Reply With Quote
Old 08-19-2009, 09:32 PM   #24
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
Yea, sorry. No support for the r33 for some reason....... Kinda skipped that one and I dont know why. You can run a maxima ecu like you mentioned or a z32 ecu. We can cut you a deal on a type 2 board if you go with a z32 ecu. We are figuring out the price and we are going to offer a "hook up" on the type 2 boards in the preme section soon to come.
4x4le is offline   Reply With Quote
Old 08-19-2009, 10:30 PM   #25
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
i'd be more than willing to take someone for a ride in my car to see how it works...... hopefully someone out there can show me how to ride my motorcycle on the freeway
__________________

handinpants is offline   Reply With Quote
Old 08-19-2009, 11:37 PM   #26
gmember240
Leaky Injector
 
gmember240's Avatar
 
Join Date: Jun 2009
Location: Cleveland
Age: 31
Posts: 106
Trader Rating: (2)
gmember240 is an unknown quantity at this point
Feedback Score: 2 reviews
Going tommorow to local race shop to chat about getting my s14 nistuned there. They just got their dealers license and i would be the first. I have a pretty basic setup and I'm kind of curious if there's anything I need to get before I can get it Nistuned. Here's my setup:

95 240sx KA24DET
SR T25 turbo
SR 370cc injectors
N60 Maf
ebay FMIC
Megan Racing 3" straightpipe exhaust
Megan Racing 3" downpipe
Megan Racing turbo elbow
stock turbo 7psi wastegate
Greddy type rs BOV
Blow Through Setup

I'm extremely new to tuning and basically what I'm asking is do I have all the required parts to get the car Nistuned? I don't want to get an ECU tune and I like what I've heard about Nistune. Thanks
gmember240 is offline   Reply With Quote
Old 08-20-2009, 01:43 AM   #27
GSXRJJordan
Post Whore!
 
GSXRJJordan's Avatar
 
Join Date: May 2006
Location: << 626 >>
Posts: 9,135
Trader Rating: (19)
GSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfectionGSXRJJordan is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to GSXRJJordan
Quote:
Originally Posted by 4x4le View Post
Yea, sorry. No support for the r33 for some reason....... Kinda skipped that one and I dont know why. You can run a maxima ecu like you mentioned or a z32 ecu. We can cut you a deal on a type 2 board if you go with a z32 ecu. We are figuring out the price and we are going to offer a "hook up" on the type 2 boards in the preme section soon to come.
Cool, I'll keep an eye out for that. I'd love to be one of the first with this setup in the states, and put it against other similar RB25 setups out there.

Quote:
Originally Posted by handinpants View Post
i'd be more than willing to take someone for a ride in my car to see how it works...... hopefully someone out there can show me how to ride my motorcycle on the freeway
Haha, replied to your PM - I'm down to show you how to ride it on one wheel or two on the freeway
__________________


Jordan Innovations has a new web site!
www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com
GSXRJJordan is offline   Reply With Quote
Old 08-20-2009, 09:40 PM   #28
handinpants
FreshColdBeer.com
 
handinpants's Avatar
 
Join Date: Feb 2008
Location: California
Age: 38
Posts: 2,665
Trader Rating: (48)
handinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud ofhandinpants has much to be proud of
Feedback Score: 48 reviews
Send a message via AIM to handinpants
I'm only stating from experience, and my wallet does not get bigger from any of my claims. I just know that I have a suckass $10 and hour job stacking tomatos, and i can't afford to shell out $900 for a power fc or haltech, then spend another $600 on a tune, its just too friggin expensive. which is why i sold my power fc without even trying to install it. bought the nistune board and paid for tuning, and saved my self some money i was able to still pay some bills...

so from a financial standpoint best bang for buck, definitely nistune. i guess i am kinda biased you know but I feel for every other low baller 240 owner, cause i'm in that boat.

if anyone wants to doubt my claims i'll take you on a ride in my car with it....
__________________

handinpants is offline   Reply With Quote
Old 08-20-2009, 10:53 PM   #29
4x4le
Zilvia FREAK!
 
4x4le's Avatar
 
Join Date: Nov 2008
Location: Manchester, Tn
Posts: 1,253
Trader Rating: (1)
4x4le is an unknown quantity at this point
Feedback Score: 1 reviews
Send a message via AIM to 4x4le Send a message via Yahoo to 4x4le
Im just going to get to the point. Im not trying to be a dick.

Nistunes business plan has worked so far, it has also made it world wide when that wasnt the plan at first. Why change a business plan that works? Especially when you are officially the 1st and only person I have heard of with such complaints?

They are not going to take business advice from anyone. I dont blame them either.

You never hear people using nistune be unhappy with it unless the real problem is on their end.

If you want to tune a nissan ecu for free download tuner pro, get a consult cable, a chip burner, a standard daughter board, and 2 emmulators and have at it, for free! You make the same tune as you can with a nistune board and software, its just not as easy and the software typicially sucks. Nistune does not add features to your ecu, it just allows you to change the existing parameters, just like tuner pro rt.
NOW if you want to be able to tune a nissan ecu easier, with better software and less hardware cough up the money for the software or shut up. Youve gotta pay to play. Nistune is a luxury. You can walk to dinner for free, or you can take a limo, but dont expect the limo to be free.
4x4le is offline   Reply With Quote
Old 08-21-2009, 09:05 AM   #30
kandyflip445
Post Whore!
 
kandyflip445's Avatar
 
Join Date: Sep 2002
Location: Arden, NC
Age: 36
Posts: 4,460
Trader Rating: (1)
kandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfectionkandyflip445 is close to perfection
Feedback Score: 1 reviews
Send a message via AIM to kandyflip445
Quote:
Originally Posted by 4x4le View Post
Im just going to get to the point. Im not trying to be a dick.

Nistunes business plan has worked so far, it has also made it world wide when that wasnt the plan at first. Why change a business plan that works? Especially when you are officially the 1st and only person I have heard of with such complaints?

They are not going to take business advice from anyone. I dont blame them either.

You never hear people using nistune be unhappy with it unless the real problem is on their end.

If you want to tune a nissan ecu for free download tuner pro, get a consult cable, a chip burner, a standard daughter board, and 2 emmulators and have at it, for free! You make the same tune as you can with a nistune board and software, its just not as easy and the software typicially sucks. Nistune does not add features to your ecu, it just allows you to change the existing parameters, just like tuner pro rt.
NOW if you want to be able to tune a nissan ecu easier, with better software and less hardware cough up the money for the software or shut up. Youve gotta pay to play. Nistune is a luxury. You can walk to dinner for free, or you can take a limo, but dont expect the limo to be free.
I think you guys are taking Steve's comments the wrong way. He's asking for clarification on a few issues he's seen/had. A few of them were answered by that guy from Nistune. Which is great. Notice he's not beating a dead horse about those questions.

Also notice, you "sideways" guys, that just calling names and saying things like "let me break it down for you in simple first grade mathematics" doesn't help people see the merit in this thread OR the product. I automatically think, "hey look, if I become a part of the Nistune users I can be a part of a group of dickheads!" If you have a REAL answer to a question then answer. If you don't fully understand where Steve is coming from then ask him to clarify his question.

I think, and correct me if I'm wrong Steve, that his issue is not that he's trying to get them to change their operating model. I think his issue is that he DOES have experience with Nistune. His experience was that someone bought a second hand Nistune and couldn't get Steve to tune it like he would have if the person would have bought a NEW Nistune.

Now I know you can just go buy a new license of Nistune software. But I think that's kinda doing a disservice to the customers. If I had bought a Power FC or AEM EMS or Haltech from someone second hand then I wouldn't have to call the company to buy the tuning software to use it. (I'm assuming here cause I've never bought these. lol)

That's my .02 cents.

Let's try to keep it on topic and leave the useless name-calling and finger-pointing out of here.
__________________
My 240 vBgarage
kandyflip445 is offline   Reply With Quote
Reply

Bookmarks

Tags
efi tuning, nistune, power fc, socal, standalone


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™