5/16 inline fuel pressure gauge adapter? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jt1583 · 05-12-2008, 03:16 AM

Anyone know where to get a one peice adapter like this? Basically a T with two 5/16" fuel line barbs and 1/8 npt female threads as the middle connection?

I know I could peice it together from parts but I would like one unit if anyone makes it.

Thanks

rican_nick · 05-12-2008, 07:14 AM

i didnt search much but i never found a 5/16's one.

I ended up getting a MR. Gasket 3/8's and grinding the barbs down a little bit and worked like a charmp after forcing the hose on.

then i dumped all that and changed my whole fuel set up to -6.

If your interested in it.. 20 shipped including the gauge.. its just sitting around now. PM me.

projectRDM · 05-12-2008, 01:12 PM

I just did the same thing for a customer's car, used the 3/8" and grinded the flares down a little, then lubed the shit out of the hoses. It's janky, but the clamps hold it fine. If using OE hoses they're actually 8MM, so an aftrmarket piece of 5/16" fits a little better. I plan to replace it all next time I have the car on hand.
On my own car I have a Greddy sender so it's 1/8" BPST, I was able to piece it together with Earl's fittings, a 1/8" T then two 1/8" to a hose barb fittings, but those three alone were like $30.

jholman05 · 05-23-2008, 10:50 AM

I'm trying to do the same thing found the adapter on ebay for $15 shipped.

http://cgi.ebay.com/ebaymotors/5-16-...spagenameZWD1V

McCoy · 05-23-2008, 10:58 AM

^^^ That's the one I have in my garage... waiting to go on the car. It's more than worth the $15.

SRpetey · 09-23-2010, 10:00 PM

Quote:

Originally Posted by jt1583

Anyone know where to get a one peice adapter like this? Basically a T with two 5/16" fuel line barbs and 1/8 npt female threads as the middle connection?

I know I could peice it together from parts but I would like one unit if anyone makes it.

Thanks

Reviving this from the dead to post my findings

greasecar.com/components/temperature-gauge-fittings-bag

05-12-2008, 03:16 AM	#1
jt1583 Zilvia Member Join Date: Jul 2005 Location: Georgia Age: 33 Posts: 262 Trader Rating: (3) Feedback Score: 3 reviews	5/16 inline fuel pressure gauge adapter? Anyone know where to get a one peice adapter like this? Basically a T with two 5/16" fuel line barbs and 1/8 npt female threads as the middle connection? I know I could peice it together from parts but I would like one unit if anyone makes it. Thanks

05-12-2008, 07:14 AM	#2
rican_nick Zilvia FREAK! Join Date: May 2003 Location: Augusta, GA Age: 39 Posts: 1,204 Trader Rating: (0) Feedback Score: 0 reviews	i didnt search much but i never found a 5/16's one. I ended up getting a MR. Gasket 3/8's and grinding the barbs down a little bit and worked like a charmp after forcing the hose on. then i dumped all that and changed my whole fuel set up to -6. If your interested in it.. 20 shipped including the gauge.. its just sitting around now. PM me. __________________ Nick O. 97 240sx My Seller's Review Thread

05-12-2008, 01:12 PM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	I just did the same thing for a customer's car, used the 3/8" and grinded the flares down a little, then lubed the shit out of the hoses. It's janky, but the clamps hold it fine. If using OE hoses they're actually 8MM, so an aftrmarket piece of 5/16" fits a little better. I plan to replace it all next time I have the car on hand. On my own car I have a Greddy sender so it's 1/8" BPST, I was able to piece it together with Earl's fittings, a 1/8" T then two 1/8" to a hose barb fittings, but those three alone were like $30. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-23-2008, 10:50 AM	#4
jholman05 Zilvia Member Join Date: Sep 2006 Location: Cincinnati Age: 34 Posts: 286 Trader Rating: (2) Feedback Score: 2 reviews	I'm trying to do the same thing found the adapter on ebay for $15 shipped. http://cgi.ebay.com/ebaymotors/5-16-...spagenameZWD1V

05-23-2008, 10:58 AM	#5
McCoy Zilvia Junkie Join Date: Jan 2007 Location: WA Age: 45 Posts: 317 Trader Rating: (5) Feedback Score: 5 reviews	^^^ That's the one I have in my garage... waiting to go on the car. It's more than worth the $15.