racepar1

Well, it's time to clean-out the shelves here at the shop! I've gathered all the random parts sitting around that I think someone else might need. All prices are OBO unless otherwise stated and I will ship, also unless stated otherwise. I will make package deals and will be much more willing to lower the price for pick-up/cash transactions. Remember, shipping is a PITA and my time is valuable...

Parts are located at my work in Northridge, 91324...

I will be adding more stuff as I dig it out!!!



Porsche Brembo calipers
This is a PAIR of Porsche calipers, made by Brembo. These are 928 S4 rear calipers, about the same dimensions as a 300zx 26mm caliper. The original rotor diameter was 299mm (11.77") and 24mm thick (.94"). I would use a 12" diameter, 1" thick rotor with these personally. The calipers are in mechanically good shape, no leaks. The finish is a little rough and they could definitely use a re-paint. You will need custom brackets and rotors to use these. I do not have the brackets or rotors. These would make a GREAT front setup on a lower powered car (miata, ae86, N/A 240, etc...) and probably would not require a master upgrade due to the smaller pistons. They would also make a GREAT rear setup for a higher powered car. Pair these with a set of Porsche Brembo "big red" or the corresponding 928 S4 front calipers and you'll be able to stop the earth's rotation at will!

$125 FIRM!!!






Work RS-Beta centercaps
These are 3 ORIGINAL Work RS-Beta centercaps. Two of the caps are in pretty good shape, just some small scratches in he clearcoat. The thirdcap has the clearcoat peeling and would need restoration to look good.

$20/ea for the clean pair
$10 for the damaged one








S13 subframe bushing inserts
This is a BNIB set of S13 subframe bushing inserts, made by energy suspension. These slide into the hollow areas of your stock bushings to stiffen them up a little. EVERYTHING is included, bag is unopened.

$10





S13/S14 rear knuckle/arm bushings
This is a loose pair of brand new bushings for the rear knuckles or the rear suspension arms on an S13 or S14. These will NOT FIT S14 stock toe arms as those bushings are wider. I ONLY have the pair of bushings. This would be great for someone running stock trac arms with adjustable rear toe/camber arms.

$10





KA M/T starter bolts
This is a mis-matched pair of bolts for the KA w/manual transmission starter bolts. Both bolts are metric grade 8.8 and both come with lockwashers. The heads of both bolts are also the same size so you can use the same socket.

$10 shipped




S13 SOHC injectors
This is a set of 4 S13 SOHC KA injectors. ALL injectors have been tested electrically, terminals cleaned, and are known to be good. NO seals are included. Nissan injectors LOVE to take a shit, everyone should have a spare.

$10/ea



Sidemount Seat Brackets
This is a pair of sidemount seat brackets. I have no idea what seat these are for. The seat must be much narrower in the rear than the front.

$20




PAIR of Rays Blue Valvestems

This is a pair of blue Ray's valvestems with caps. These came off an older set of Gramlights and when the wheels sold, these were left. The Finish id NOT perfect and they could use new seals.

$10





Pair of Spacers for TEIN tension rods
This is a pair of spacers for TEIN tension rods. If you lose these you're screwed so I figure someone could use them.

$20





Stock S13 steering knuckles
This is a pair of stock S13 steering knuckles. No damage...

$10





S14 KA IACV
This is a good working S14 IACV valve. It's in good shape no damage. I'm not sure if it would work on an S13 KA, you would need to check the part numbers to be sure.

$20





S14 KA EGR solenoid
This is a good condition used EGR solenoid for an S14 KA24DE. New these are about $100 from the dealer...

$20





S13 dash switches
These are random S13 dash switches. All are in good working order and would just need a little cleaning to look nice.

$5/ea





S13 pop-up headlight subharnesses
These are 3 S13 pop-up headlight subharnesses. These are often damaged or missing. Most people don't know that Silvia headlights SHOULD come with a subharness of their own that plugs into this harness for the headlights.

$10/ea





Pigtails/connectors for SR wiring
I have two complete sets of connectors for wiring an SR harness for a 240sx chasis. The connectors are all in good shape, no issues. This would be perfect for someone who doesn't want to hack-up their KA harness or if you don't have the stock engine harness. For the underdash plug I DO NOT cut and solder the wires. I simply re-pin the wiring into the new connector. For a dualcam swap you just swap the pins directly across to the same position in the new connector. For the SR wiring you'll have to do a little more research on how to pin them. FR sport has a GREAT write-up. Two of the underdash plugs are already de-pinned and one of the others isn't actually for the underdash harness so the wire colors won't match. I also have the dash harness connector separately for those of you doing a DOHC swap.

$15/set (specify if your chasis was originally SOHC or DOHC...)





S13 cluster subharnesses
This is a pair of instrument cluster subharnesses for an S13 chasis. The harnesses are in good shape, no damage.

$10/ea





Redtop SR coolant sensor subharness
This is a coolant sensor subharness for an S13 SR20DET. The harness is in good shape, no issues.

$15





S13 corner lights
These are good condition S13 corner lamps. The rears are a matched set, left and right, and come with the sockets. The fronts are BOTH for the right side and ONLY ONE comes with the socket. You can use them on the left side as well, the writing on the lens would just be upside-down.

$5/ea





S13 push-button delete panel
This is a good condition push-button delete panel for where the rear wiper switch or factory foglight switch would go on an S13. The panel is in good shape, just some very light scratches here and there. The clips are also included, just push it right in!

$5





S13 coin tray
This is the coin tray that goes in the cluster bezel on an S13. it's in good shape, just needs a good cleaning. Clips are included as well.

$5





S13 inner door handle screw covers
This is a pair of the screw covers that go in the bottom of the inner door handles on an S13. These are usually missing and are hard to find.

Will post better pic, I didn't realize how out of focus that was...

$10 shipped





S14 passenger's side urethane steering rack bushing
This is a passenger's side steering rack bushing for an S14 chasis. It is made by energy suspension and has never been used.

$5





KADE or SR oil caps
This is a pair of oil filler caps for an SR or KADE. These will NOT fit a singlecam and I don't know about CA. Both caps are in good condition.

$5/ea





S13 manual window crank
This is a window crank for an S13. It is faded as usual, but compared to a lot of them is in pretty good shape. The clip and the plastic washer are included as well.

$5





KA dipstick
This is a dipstick out of a KADE, but I'm pretty sure it will work for singlecam's as well. It's in good shape, no issues.

$5





S13 rear hood seal
This is the seal that goes along the back of the engine bay and seals the hood for an s13. The seal is in good shape and all clips are included.

$5





S13 "oh shit" handle
This is the handle for the passenger's door on an S13, commonly referred to as the "oh shit handle". This one is very clean.

$10





S13 clutchline bracket
This is the bracket for the clutch line on an S13. These are commonly left out on swapped cars.

$5





S13/14 clutch and brake pedal pins
These are the pins for either the clutch or the brake pedals on an S13 or S14. These two are actually from the brake pedal, but will work on either one perfectly.

$5/ea





S13 front swaybar link
This is a front swaybar link for an S13 chasis. It should work on an S14 as well. This one is in good condition, moves free, nice and tight.

$5





RANDOM CRAP...
I also have a whole shitload of small random stuff as well. I've got 3 boxes full of wiring, relays, switches, and other misc electrical shit. I've got 2 parts shells, one coupe and one hatch. If you need a random small part that's not listed HIT ME UP! I probably have it...

s13_redSILVIA

sorry, this isnt related to your sale tread, but where did you get that front lip?

__________________

racepar1

That's the Garage Defend front lip. It looks super nice, but it was egg shell thin fiberglass and very fragile. I sold it to a buddy of mine and it was thoroughly destroyed...

JeffreySFG

Still have injecters and starter?

mechanicalmoron

Steering bushing 10 bucks shipped? 79734.

Rich260z

So that's what the lip looked like before the all the duct tape.

racepar1

If it's still listed, I still have it!

Nah, I've gotta get at least $15 shipped. List price on that is about $20 +shipping from online retailers.

Yep, before Ruel the destroyer got his paws on it! HAHA!

mechanicalmoron

....15 shipped then? That still sounds good to me.

Black R

Some neat stuff in here.

I'll pay $20 shipped for the steering shaft bushing.

Do the Porsche brembo's have the pads in them still?

I'm interested, but want to research pads first.

__________________
S13 XE coupe: Aristo GTE, R154, GT37, Defsport Wilwood kit, KTS coilovers

D.Adams

would you want to part with just the knuckles and no hubs.

__________________
“About the time we think we can make ends meet, somebody moves the ends.” ―Herbert Hoover

The build
http://zilvia.net/f/builds-builds-on...u-city-az.html

Owner of NVS Fabrications

racepar1

You should have PMed me. I already gave my paypal out on that item today. If the other buyer backs out I'll PM you with my paypal, thanks!

I do not have the pads. Those pads should be VERY easy to get your hands on though. Pads for Brembo calipers are not really hard to find and besides that it's from a Porsche. I'm going to do a little research on what exactly those calipers came from. I'll let you know if I find anything.

As for the steering bushing, I've already got my paypal out on that one, I'll let you know if the other two buyers back out.

Yeah, I can do that. $20 for the pair of knuckles.


EDIT: Sorry guys, the steering shaft bushing is SOLD!

TurboSE

Do you have a passenger side lower fender cap?

Sent from my EVO using Tapatalk 2

__________________
WTB: PAIR 18x10 0 to -25, less than $1500 shipped please.

racepar1

You mean for a chuki front end?

racepar1

First bump, more info added on the Brembos...

Jizzyjozay

How much would that alternator cost to ship

racepar1

$20 for shipping

racepar1

Last bump, more parts added!