JurisMyDiction

before i go buying a set of sportmax's i have a couple questions... usually, if feedback form almost EVERYBODY is negative about a product, it's cause the thing sucks. so i read up on sportmax's. i see plenty of people call them crappy, yet no substance as to why... searched for a while and they don't seem to be overly heavy, they don't seem to break, and they're not very expensive... so

question 1) why not sportmax?

question 2) for those of you that can't afford 3k wheels like me, what wheels do you run? i don't really want to spend 1k on wheels.

i'll probably end up with those sportmax 962's cause, well, they're attractive, well priced, and staggered. if your'e gonna flame, do so with good info. if what i'm saying sounds stupid, say so, but explain. otherwise, i don't see the reason why people HATE on these wheels so much (is it like the honda/rota thing?)

DataXUnknown

I think sportmax is just waaaaaay to played out. Pretty much anyone who doesn't have enough money to buy good lookin' wheels, either get ROTA or sportmax. Chances are, all of us here on Zilvia will see you rolling on sportmax wheels.

Personally, I don't like the look of a lot of them, but I would imagine there is more to it than just looks and cheap behind the hating of sportmax. Is it considered a knock-off brand?

lflkajfj12123

sportmax, NO.

they're cheap and gross

question 2 - only wheels that are like 3k is like TE's brand new

hardly anyone buys brand new wheels

you can buy nice used sets of COOL wheels for like under 1500

you can also run oem r33 and r34 gtr wheels

Brian

It's because most of us are tired of the new kids coming in and PROVIDING a market for this cheap SHIT that people sell now.

It used to be about good parts. Now it's about "I don't really want to spend $1000 on wheels."

One of these days soon it's gonna be, "I don't want to spend $500 on wheels...." ..."Oh yeah, but I want them to be light, look cool, and never bend."

__________________
http://bhworld.wordpress.com/

JurisMyDiction

all good replies... unfortunatey i AM a noob and i am kinda broke. i'd rather run a nice wide "played out" wheel then something "cool" in like 7inch width. anybody have any suggestions of brands or even specific wheels that thos of us who don't wanna be "mocked" should look at...

always been an FN01RC fan but those seem liek they're getting played too. the enkei's i like are too expensive, catch my drift? maybe if you guys could make some general suggestions i could stray from the noob path and still not break the bank lol

codyace

Can't hate on OEM

I like the way Z and G wheels look on 240's. Sure it's not gonna score ya points at HIN, but they are clean and functional. Plus their sizing allows for some decent tires to be used on them.

I bought a set of nice wheels once (Brand new 57 pros)...didn't even install them. I had second thoughts about ruining them, or similar, and opted for Z wheels. haven't looked back since.

__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

5t341tH

lol forizzle
+1

__________________

lexus baby

JurisMyDiction

just kinda want something around 8.5 or 9" that i can stretch tires on most OEM are between 7 and 8" width, no? i guess i just have to cruise the used forum and see what i come up with. another thing i wanted to stay away from.

also, i'm 4 lug so OEM is pretty limited.

ms!3

gx-01, fn01r-c, r33, 350z, mb weapons/battles/competitions.

if you cant afford either of those, find another hobby.


962s look like shit bro. I would much rather run oem 15x6j.

C-unit

Just drive with stock wheels, save up till your can affrod something better than Sportmax.

Matej

Get the FN01RC's.
They got so played out that nobody has had them for the past couple years.
Falken Hanabis are pretty cheap too, and not too many people have them.

zylvia213

i would say mb battles... they are decent looking w/ decent size and they are affordable. Dude just save up some money for a while then purchase something nice and quality.

__________________

pyshin

Falken Hanabi's 17x9 +20 offset. Got mine for $500 used with brand new tires

Mangudai

Why not go OEM? There are a lot of nice wheels to choose from.

__________________
Almost there.

JurisMyDiction

ok i'm liking these options. but what OEM wheels come in 4 lug? i'm not converting for now, just not an option. but i like the options you guys are suggesting.

ballinnmiami240sx

Dope wheels and 4 lug doesnt exist. Rota makes a few that are nice.

Ballin on a budget!!!!!


http://zilvia.net/f/wheels-tires/293...5x114-3-a.html

__________________
1994 FD3S Drift // 945garage // sumospeed.com

JurisMyDiction

lol those are 5 lug... but yeah i would rock them in 9 in width.

those MB battles are nice that someone suggested earlier and inexpensive as well. i think i will save up for them!

M11's

what would be a good price to purchase 300zx oem wheels at. i am considering buying some for $250 with 50% Les Swab generic tread, i thought this sounded pretty low.

Touge Noob S13

Rotas were never nice. A nice set of meshies like i have are pretty nice and affordable.

__________________

DreamN

Don't know how the market is for wheels in your area, but I could get 17" 350Z wheels with tires for less than that here. 300ZX wheels aren't big sellers in SoCal from what I have noticed unless they're really cheap.

A really clean set of 350Z 18" Anniversary wheels (5 Spoke) go anywhere from $350-$500 with tires (What I'm thinking of getting next) and same goes for those G35 18" 7 Spokes. Great sizing on all of these considering they're OEM. Space them out a little and they look great on an S-Chassis.


If you're still 4 lug and looking for a nice set of wheels I would look into 17x9 +20 FNs or Falken Hanabis are nice. Check out RBMotoring.com for their wheel section. They usually have some nice 4 lug sets for a good price.

__________________
- Jimmy

Wanted:
TBD

For Sale:
TBD

ryguy

If all you do is drive the car to the mall and back I don't see how the brand of the wheel matters. If somebody made a wheel that looked like the sportmax 006 in 4x114.3 that was cheaper than Work VS-XX I would buy it, but there's no way I'm paying $4500 for a set of wheels and tires. Oh, and to everybody that complains that people support the sub-$1000 wheel market, it's not like buying used wheels helps out any manufacturer anyways. Also, I should not have to change my hubs to accommodate a wheel manufacturer, they should be accommodating me.

Sentra SE-R Spec V wheels are the best looking OEM 4 lug IMO, too bad the sizing sucks.

__________________

thestreetzking

one thing I find hilarious. I went to d1 in english town and I can literally say MORE than 50% of the cars were on sportmax wheels. swear to god, even a nice, heavily modified r32 was rocking a set of 962;s

and there are factors for me why I think there ok, the roads where I live are HORRIBLE, not a day I drive where I do not hit a pothole, and no its not my driving, its the way the roads are, some are paved but a lot have that strip in the road thats like 3 feet wide across the whole road that is 2 inches deeper, sometimes coming to a complete stop is not an option. I WISH I lived where some of you guys do, my car is as low as I can go for getting in and out of my drive way and being able to keep aero on, I still have a inch gap between tire and fender.

codyace

O/P:

If you're 4 lug, it's hard to say which way to go. You really would be better off saving for the 5 lug conversion.


Agreed. Great wheel. I ran them on my turbo Altima

__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

ManoNegra

I don't understand how you - OP
- are new to 240s
- are not 5 lug nor plan to be anytime soon
and want to spend money on cheap/knock off wheels

not putting you down, just don't follow the logic
my advice to you would be to drive on a set of stock SE wheels with good tires for a while
save your money and go 5 lug and get a quality set of wheels

I like looking at wheels but it's never been a priority for me
so I took a while - years ago - to hunt down a clean set of R33s
and I've been happy since
that's what I would get if I had a 1k budget to work on (and were 5 lug)

Nezahualcoyotl

^ thats what im currently doing
it would be a lot better to save up for a 5lug conversion then buying affordable oem rims like the ones stated above. also, in the long run it would be easier to swap to bigger brakes and the like if you plan on doing so

Touge Noob S13

Nothing wrong with 4-lug

__________________

AN89HATCH

Just do what you want to do and don't worry about what everyone else thinks. So if you like the 962's get them. Honestly they look better than sunken in OEM wheels and I don't care what any one says about that. Buy a 25mm spacer, slam your car, and pull the fenders a little and your set. I had 962's about 2 years ago, and everyone was jocking my car, to the point where it got stolen. The wheels are a bit heavy but, but they are of good quality especially for the price. If your just going to dd the car they're good. Trust me I was glad I had 400 dollar sportmaxes on my car when it was stolen rather than $2-3000 super Jdm wheels. After my experience I'm scared to have expensive wheels now because you always have to worry about people jacking them, and following you home (especially if they are rare). Good luck man.

BTW heres proof they can look good, just depends how you set them up http://zilvia.net/f/chat/216957-spor...-possible.html

I would reccomend 17x9 front 18x9.5 rear with 25 mm spacer all the way around (or 17x9 rear if you want same wheel size). looked good on my car and had decent lip in both front and rear.

__________________
slide your ride.com

S14DB

I hate to think of what kind of tires you are thinking about running if you can't afford wheels.

__________________
Comments should be taken as Opinions not as Statements of Fact

onehundredoctane

generic pic from google, no pics of them on my car, but these imho are the only thing that should ever be put on an S13. Hanabi DT05R's, not sure the cost, but well worth it.

ayuaddict

they are like 15,000 yen.

cheap cheap.

I don't understand people who buy sportmax wheels.
If you don't have money, you probably have time to wait for a good deal.
Its not like you are going to revolutionize the world, there is no rush, no need to settle for bullshit.
There are numerous (not to mention cheaper) alternatives to sportmax wheels, you just need to take some time to figure this stuff out.