Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 10-31-2020, 01:39 PM   #1
LtSlayer
Leaky Injector
 
Join Date: Jul 2020
Location: Norco
Posts: 68
Trader Rating: (0)
LtSlayer is an unknown quantity at this point
Feedback Score: 0 reviews
SR Solution to sr20 rocker arms

Hey there, My name's Hector and my partner would be my friend Nathan. I had been noticing that there wasn't any real upgrades for the SR20 when it came to rocker arms. I've seen arms offered by companies like HKS but they're little more than treated OEM arms that cost over 200 an arm when you buy the set. Having personally experienced a cracked rocker arm, I know the risk is out there and nobody wants their build to have a weak point after so much time, effort, and dedication has been poured into it.

My buddy works at a nice machine shop equipped with state of the art machining set ups. To make this a reality wed have to create in bulk to make it affordable as well as economical for all parties involved.

Although some critics may try and say the rocker arm was designed to be the weak link in the system, A thrown or cracked rocker arm can destroy a head. Rocker arm stoppers have been proposed as a solution but they too have a split jury with half of the forum say they cause more harm than good by forcing them to stay in place risking bent valves among other catastrophic failures.

The reason for this post is to gauge interest if this is something we should pursue as there's no real aftermarket solution even though the platform has been around for decades. Would there be enough support to warrant various versions such as a dual guide/solid lifter/solid and dual/ arm on top of normal arms.

What would y'all be willing to pay for these as production won't be too cheap but could lead to a great step forward in SR reliability.

My SR will be the guinea pig as its healthy and about to be completely built. This will give multiple opportunities to refine the design until I feel confident running these arms in my daily as a proof of concept and are ready to put them on the market for all of you. The manufacturing process as well as materials used will be decided on with the help of the lead engineer at the machine shop.

Thank you for the read and I'm hoping we can male something work out. Take care

Last edited by LtSlayer; 10-31-2020 at 02:26 PM.. Reason: typo
LtSlayer is offline   Reply With Quote
Sponsored Links
Old 10-31-2020, 01:46 PM   #2
LtSlayer
Leaky Injector
 
Join Date: Jul 2020
Location: Norco
Posts: 68
Trader Rating: (0)
LtSlayer is an unknown quantity at this point
Feedback Score: 0 reviews
I understand Alpha Omega Racing has already designed what we are shooting for but they have had that page up for years now and have not reached production so we'll see if we can make it. We already have the machine shop capable of production but need a large order to realize it.
LtSlayer is offline   Reply With Quote
Old 11-01-2020, 07:29 AM   #3
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 33
Posts: 5,431
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
I would get a realistic “group buy” price figured out and a total number of sets you need to start. Then people can sign up and put a down payment down and you can build a prototype set for testing. Then once you’ve finalized design and have beaten the shit out of them, you’ll have given time for people to sign up for the group buy and you can start producing them.

For me personally, I would consider paying up to $400ish for some very nice, indestructible rocker arms that came ready for dual guides. That’s just my two cents though. I may not be the typical “market”.
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 11-01-2020, 08:56 AM   #4
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,056
Trader Rating: (34)
jr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nice
Feedback Score: 34 reviews
Send a message via AIM to jr_ss
Dupe......
__________________
My SR20VET

Last edited by jr_ss; 11-13-2020 at 06:27 AM..
jr_ss is offline   Reply With Quote
Old 11-01-2020, 09:49 AM   #5
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,056
Trader Rating: (34)
jr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nice
Feedback Score: 34 reviews
Send a message via AIM to jr_ss
I think this falls into the too little too late category.

SR’s are becoming expensive to purchase and as vendors fade away, will be extremely expensive to modify. Compounding this, the VE head blows the DE/DET head out of the water. If one has to invest $500 into just rockers, that is half the cost of just a VE head. To me, it is not worth the investment.

With that said, it doesn’t mean someone wouldn’t be interested, especially someone that has a lot of money wrapped up into a DE/DET head already.

Just my thoughts.
__________________
My SR20VET

Last edited by jr_ss; 11-13-2020 at 06:26 AM..
jr_ss is offline   Reply With Quote
Old 11-02-2020, 04:15 PM   #6
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Stock rockers ground for dual guides is literally all you need. The only time they break is when they get tossed off the valve shim.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Reply

Bookmarks

Tags
billet, custom, quality, reliable, rocker arm


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™