IA Getting rid of everything REDTOP, powerfc, avcr, t3t40e, lots of stuff check it out - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slimcat7m3 · 08-06-2009, 12:00 PM

Like the title states I am getting out of the sr/240sx game. I am just going to make a list of parts that are on the engine. It is assembled for the most part. I just put it together most parts are new or like new.

I have the complete Redtop engine, bottom end looks like brand new, apexi head gasket, stock head, ARP headstuds. Basically complete engine and trans $1000

I didn't want to part it out, but am forced to

complete sr20det head with
jim wolf tech S4 cams
greddy valve springs
greddy RAS

http://forums.freshalloy.com/showthread.php?t=175695

I purchased this head off of fresh alloy there is markings on one journal and one lobe. These are how I purchased them, he was still running them in his car, so I was just going to run them as is. I paid $400 plus shipping so thats what I am asking.

New ACT 6 puck sprung clutch
used ACT HDSS clutch selling all together $250
HD pressure plate

thats how you radius a quarter for flares

(this thing would have been fast as hell, by the way it was dropped about another inch and half. This car weighs about 2000lbs. its also for sale if anyone is interested. This pic doesn't do it justice, those are the 15X8 0 offset all the way around, lots more info if you would like)

New Megan exhaust mani top mount t3/t4 $80

CS braided turbo lines $100

New Garrett T3/t4oe 60 trim 64ar SOLD

new ISIS intake mani $180

apexi AVCR $300

apexi Power FC SOLD

Z32 MAF with plug (looks like brand new and has both screens) $125

Make offers

Stock turbo manifold
blown T25
down pipe and cat delete pipe for s13
stock radiator and fan shroud for sr20det s13.

Feel free to make me offers on the stuff, I haven't checked the prices on this stuff lately. PM me with questions. Will ship everything but the engine and trans

Paypal
[email protected]

email is
[email protected]

BadazzSr20 · 08-06-2009, 12:54 PM

125.00 for the ISIS mani. LMK

30psi · 08-07-2009, 12:26 AM

any pics of the manifold?

frost1988 · 08-07-2009, 01:49 AM

pm me with pics of the turbo

slimcat7m3 · 08-07-2009, 05:25 PM

bump to the top for the night crowd.

I will get pics up as soon as I get a chance, sorry for the delay.

Creizai · 08-07-2009, 09:24 PM

How much for the head gasket down? I've never shipped a block before what does it usually run for?

Tokona-x · 08-08-2009, 04:52 AM

damn to bad you live far or id be all over the sr setup .......bump

jdmchuckiwill · 08-08-2009, 11:00 AM

pics of the turbo?

slimcat7m3 · 08-08-2009, 08:21 PM

Sorry for taking so long to post up pics, but here they are. I will take pics of anything you guys are interested in. I have a couple guys looking at the engine local, so I would rather go that route.

thanks for all the interest guys and gals

slimcat7m3 · 08-11-2009, 08:57 AM

back to the top.

save me the trouble of listing it on ebay.

Thanks

S13project · 08-12-2009, 03:46 AM

pm'ed about power fc

wings_s13 · 08-12-2009, 03:59 AM

Are u willing to ship the turbo? also do u have pics of clutch??very interedted thanks

bump

180sx_this · 08-12-2009, 03:06 PM

I'm down for the motor and trans.

slimcat7m3 · 08-13-2009, 09:30 PM

guys I am trying to sell the engine and trans local first to avoid shipping. I will try and get pics up of the stuff you are interested in. I just had a family emergency so the next few days are going to be really busy. Please be patient, I will get them up as soon as I can.

Thanks a lot
Jeremy

DrifterPaw · 08-13-2009, 09:31 PM

PM interested in the fan shroud still available

slimcat7m3 · 08-25-2009, 12:15 PM

To the top.

Thanks for all the interest

*racerx2k1* · 08-25-2009, 12:38 PM

Quote:

Originally Posted by slimcat7m3

bump to the top for the night crowd.

I will get pics up as soon as I get a chance, sorry for the delay.

Quote:

Originally Posted by slimcat7m3

Sorry for taking so long to post up pics, but here they are. I will take pics of anything you guys are interested in. I have a couple guys looking at the engine local, so I would rather go that route.

thanks for all the interest guys and gals

Quote:

Originally Posted by slimcat7m3

back to the top.

save me the trouble of listing it on ebay.

Thanks

Quote:

Originally Posted by slimcat7m3

To the top.

Thanks for all the interest

2 bump limit. You can start new thread in 3 days.

08-06-2009, 12:00 PM	#1
slimcat7m3 Leaky Injector Join Date: Apr 2006 Location: Iowa City, Iowa Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	Getting rid of everything REDTOP, powerfc, avcr, t3t40e, lots of stuff check it out Like the title states I am getting out of the sr/240sx game. I am just going to make a list of parts that are on the engine. It is assembled for the most part. I just put it together most parts are new or like new. I have the complete Redtop engine, bottom end looks like brand new, apexi head gasket, stock head, ARP headstuds. Basically complete engine and trans $1000 I didn't want to part it out, but am forced to complete sr20det head with jim wolf tech S4 cams greddy valve springs greddy RAS http://forums.freshalloy.com/showthread.php?t=175695 I purchased this head off of fresh alloy there is markings on one journal and one lobe. These are how I purchased them, he was still running them in his car, so I was just going to run them as is. I paid $400 plus shipping so thats what I am asking. New ACT 6 puck sprung clutch used ACT HDSS clutch selling all together $250 HD pressure plate thats how you radius a quarter for flares (this thing would have been fast as hell, by the way it was dropped about another inch and half. This car weighs about 2000lbs. its also for sale if anyone is interested. This pic doesn't do it justice, those are the 15X8 0 offset all the way around, lots more info if you would like) New Megan exhaust mani top mount t3/t4 $80 CS braided turbo lines $100 New Garrett T3/t4oe 60 trim 64ar SOLD new ISIS intake mani $180 apexi AVCR $300 apexi Power FC SOLD Z32 MAF with plug (looks like brand new and has both screens) $125 Make offers Stock turbo manifold blown T25 down pipe and cat delete pipe for s13 stock radiator and fan shroud for sr20det s13. Feel free to make me offers on the stuff, I haven't checked the prices on this stuff lately. PM me with questions. Will ship everything but the engine and trans Paypal [email protected] email is [email protected] Last edited by slimcat7m3; 08-19-2009 at 11:26 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2009, 12:54 PM	#2
BadazzSr20 Zilvia Junkie Join Date: Mar 2009 Location: West Palm beach Posts: 564 Trader Rating: (13) Feedback Score: 13 reviews	125.00 for the ISIS mani. LMK

08-07-2009, 12:26 AM	#3
30psi Leaky Injector Join Date: Jul 2009 Location: pa Posts: 77 Trader Rating: (0) Feedback Score: 0 reviews	any pics of the manifold?

08-07-2009, 01:49 AM	#4
frost1988 Leaky Injector Join Date: Jul 2009 Location: seattle Age: 33 Posts: 146 Trader Rating: (2) Feedback Score: 2 reviews	pm me with pics of the turbo

08-07-2009, 05:25 PM	#5
slimcat7m3 Leaky Injector Join Date: Apr 2006 Location: Iowa City, Iowa Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	bump to the top for the night crowd. I will get pics up as soon as I get a chance, sorry for the delay.

08-07-2009, 09:24 PM	#6
Creizai Zilvia Junkie Join Date: Mar 2005 Location: Cincinnati / Gaithersburg Age: 36 Posts: 360 Trader Rating: (2) Feedback Score: 2 reviews	How much for the head gasket down? I've never shipped a block before what does it usually run for?

08-08-2009, 04:52 AM	#7
Tokona-x Zilvia FREAK! Join Date: Nov 2008 Location: 909 Posts: 1,298 Trader Rating: (140) Feedback Score: 140 reviews	damn to bad you live far or id be all over the sr setup .......bump

08-08-2009, 11:00 AM	#8
jdmchuckiwill Zilvia Member Join Date: Nov 2008 Location: Lebanon, Tn Posts: 272 Trader Rating: (0) Feedback Score: 0 reviews	pics of the turbo?

08-08-2009, 08:21 PM	#9
slimcat7m3 Leaky Injector Join Date: Apr 2006 Location: Iowa City, Iowa Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	Sorry for taking so long to post up pics, but here they are. I will take pics of anything you guys are interested in. I have a couple guys looking at the engine local, so I would rather go that route. thanks for all the interest guys and gals

08-11-2009, 08:57 AM	#10
slimcat7m3 Leaky Injector Join Date: Apr 2006 Location: Iowa City, Iowa Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	back to the top. save me the trouble of listing it on ebay. Thanks

08-12-2009, 03:46 AM	#11
S13project Zilvia Junkie Join Date: Mar 2006 Location: dirtysouth Posts: 512 Trader Rating: (7) Feedback Score: 7 reviews	pm'ed about power fc

08-12-2009, 03:59 AM	#12
wings_s13 Zilvia Junkie Join Date: Dec 2007 Location: California Posts: 440 Trader Rating: (0) Feedback Score: 0 reviews	Are u willing to ship the turbo? also do u have pics of clutch??very interedted thanks bump

08-12-2009, 03:06 PM	#13
180sx_this Zilvia Member Join Date: Sep 2005 Location: Springfield, VA Posts: 257 Trader Rating: (0) Feedback Score: 0 reviews	I'm down for the motor and trans.

08-13-2009, 09:30 PM	#14
slimcat7m3 Leaky Injector Join Date: Apr 2006 Location: Iowa City, Iowa Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	guys I am trying to sell the engine and trans local first to avoid shipping. I will try and get pics up of the stuff you are interested in. I just had a family emergency so the next few days are going to be really busy. Please be patient, I will get them up as soon as I can. Thanks a lot Jeremy

08-13-2009, 09:31 PM	#15
DrifterPaw Leaky Injector Join Date: Dec 2007 Location: Germantown,MD Age: 37 Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	PM interested in the fan shroud still available

08-25-2009, 12:15 PM	#16
slimcat7m3 Leaky Injector Join Date: Apr 2006 Location: Iowa City, Iowa Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	To the top. Thanks for all the interest