NY FS - sr20det stuff, some ka turbo stuff - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AsleepAltima · 07-13-2012, 08:08 PM

1 ka ecu - not sure if its auto or 5sp - 50 bucks

sr20det coilpacks - all check out at .7 ohms except for the one with the zip tie - that one was 1 ohm. 60 bucks for a set of 4.

sr20det coil pack harness wires, perfect for building a new harness. one was slightly melted but it wasnt arcing out or anything. 20 bucks.

4 740cc top feed injectors with resistors. cant remember if they are msd or rc. i had a set of each and i put one of them on my sr and the other on a ka-t. cant remember which set went where. 200 for the set of 4 with o-rings and pigtails w/resistors. 275 with jwt fuel rail

ka-t fmax t3 turbo manifold w/38mm tial wastegate. it was on my fwd ka but from what i understand, its a first run log manifold and will fit the rwd ka as well - topmount SOLD!

baller dp setup, has to be cut and turned for rwd setup though - 200 bucks

i can get more pics of the downpipe,

aeromotive boost reference fuel pressure regulator - red, comes with fuel pressure gauge and braided lines - $100 plus shipping

buyer is responsible for all paypal fees

AsleepAltima · 07-14-2012, 10:51 AM

740cc injectors

upper half of the downpipe, the rest of it is on the car, ill pull it off today. this is a custom one off piece that was made for a high hp turbo altima.

AsleepAltima · 07-15-2012, 09:14 AM

ttt - buy my stuff!

Sliderintrainin · 07-15-2012, 03:28 PM

e5 is stock s13 sr20det ecu.

bump

team13 · 07-15-2012, 05:30 PM

whats that eccs harness too/

AsleepAltima · 07-15-2012, 06:48 PM

its to a ka, it has the injector resistors on it.

thanks slider, i didnt know if i had kept that ecu or let it go with the coupe i sold.

team13 · 07-15-2012, 07:51 PM

s14 ka u want to sell it

AsleepAltima · 07-15-2012, 08:00 PM

Quote:

Originally Posted by team13

s14 ka u want to sell it

i dont have an s14 ka

team13 · 07-15-2012, 10:28 PM

I ment the cut harness For sale is it s14 ka ?

AsleepAltima · 07-16-2012, 07:52 AM

Quote:

Originally Posted by team13

I ment the cut harness For sale is it s14 ka ?

no, its actually for a 95 altima. i think you can still use it if your harness is the same color, you just have to repin a couple wires. i think jwt talks about it on their site, but i could be wrong.

AsleepAltima · 07-17-2012, 03:56 PM

E5 ecu and manifold are sold

AsleepAltima · 07-19-2012, 10:40 AM

ttt - items added

AsleepAltima · 07-21-2012, 02:20 PM

ttt - parts still available!

***Future240*** · 07-21-2012, 08:34 PM

Over the 2 bump limit, you can start a new thread in 3 days.

07-13-2012, 08:08 PM	#1
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	FS - sr20det stuff, some ka turbo stuff 1 ka ecu - not sure if its auto or 5sp - 50 bucks sr20det coilpacks - all check out at .7 ohms except for the one with the zip tie - that one was 1 ohm. 60 bucks for a set of 4. sr20det coil pack harness wires, perfect for building a new harness. one was slightly melted but it wasnt arcing out or anything. 20 bucks. 4 740cc top feed injectors with resistors. cant remember if they are msd or rc. i had a set of each and i put one of them on my sr and the other on a ka-t. cant remember which set went where. 200 for the set of 4 with o-rings and pigtails w/resistors. 275 with jwt fuel rail ka-t fmax t3 turbo manifold w/38mm tial wastegate. it was on my fwd ka but from what i understand, its a first run log manifold and will fit the rwd ka as well - topmount SOLD! baller dp setup, has to be cut and turned for rwd setup though - 200 bucks i can get more pics of the downpipe, aeromotive boost reference fuel pressure regulator - red, comes with fuel pressure gauge and braided lines - $100 plus shipping buyer is responsible for all paypal fees Last edited by AsleepAltima; 07-21-2012 at 02:22 PM..

07-14-2012, 10:51 AM	#2
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	740cc injectors upper half of the downpipe, the rest of it is on the car, ill pull it off today. this is a custom one off piece that was made for a high hp turbo altima. Last edited by AsleepAltima; 07-17-2012 at 03:56 PM..

07-15-2012, 05:30 PM	#5
team13 Zilvia Junkie Join Date: Mar 2004 Location: dubuque Age: 38 Posts: 353 Trader Rating: (5) Feedback Score: 5 reviews	whats that eccs harness too/ __________________

07-15-2012, 07:51 PM	#7
team13 Zilvia Junkie Join Date: Mar 2004 Location: dubuque Age: 38 Posts: 353 Trader Rating: (5) Feedback Score: 5 reviews	s14 ka u want to sell it __________________

07-15-2012, 10:28 PM	#9
team13 Zilvia Junkie Join Date: Mar 2004 Location: dubuque Age: 38 Posts: 353 Trader Rating: (5) Feedback Score: 5 reviews	I ment the cut harness For sale is it s14 ka ? __________________

07-15-2012, 09:14 AM	#3
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	ttt - buy my stuff!

07-15-2012, 03:28 PM	#4
Sliderintrainin Zilvia Member Join Date: Sep 2011 Location: NY Posts: 266 Trader Rating: (12) Feedback Score: 12 reviews	e5 is stock s13 sr20det ecu. bump

07-15-2012, 06:48 PM	#6
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	its to a ka, it has the injector resistors on it. thanks slider, i didnt know if i had kept that ecu or let it go with the coupe i sold.

07-17-2012, 03:56 PM	#11
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	E5 ecu and manifold are sold

07-19-2012, 10:40 AM	#12
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	ttt - items added

07-21-2012, 02:20 PM	#13
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	ttt - parts still available!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode