Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 12-21-2017, 05:38 PM   #1
Pixel6
 
Pixel6's Avatar
 
Join Date: Nov 2017
Location: Earf
Posts: 22
Trader Rating: (0)
Pixel6 is an unknown quantity at this point
Feedback Score: 0 reviews
S13 Silvia - Rear Subframe Swap Question

So question...

I have a 91 Silvia with the super HICAS rear subframe. I bought the lockout bar, but just found a pretty good deal on a standard USDM S13 subframe.

So before I clean it all up, put on all new Energy Suspension bushings, and the ISR suspension kit, I need to know a few things...

Are the subframe mounts on my Silvia all in the same position for both subframes??

The USDM one came with an open differential. Will my stock LSD that’s on the super HICAS bolt straight up?

If so I’ll probably weld the open diff to lock it, and have the ability to swap em out as needed.

So yea, the big question I have before I begin, is if it’s just a straight swap and if all the bolt holes line up on the main subframe mounts.

Thanks.
Pixel6 is offline   Reply With Quote
Sponsored Links
Old 12-21-2017, 07:10 PM   #2
ANDY black s13
Zilvia Member
 
Join Date: Mar 2012
Location: erith kent england
Age: 53
Posts: 153
Trader Rating: (0)
ANDY black s13 is an unknown quantity at this point
Feedback Score: 0 reviews
the sub frames are same mounting points,the diffs will swap between the two sub frames
the only difference afaik is in rear half propshaft lengths open diff longer lsd shorter
ANDY black s13 is offline   Reply With Quote
Old 12-21-2017, 10:28 PM   #3
Pixel6
 
Pixel6's Avatar
 
Join Date: Nov 2017
Location: Earf
Posts: 22
Trader Rating: (0)
Pixel6 is an unknown quantity at this point
Feedback Score: 0 reviews
Nice. I’ll see if I can source a half prop for the open one then. Or maybe have a shim made as I would need to lengthen my oem one to accommodate the open diff.
Pixel6 is offline   Reply With Quote
Old 12-21-2017, 11:08 PM   #4
ANDY black s13
Zilvia Member
 
Join Date: Mar 2012
Location: erith kent england
Age: 53
Posts: 153
Trader Rating: (0)
ANDY black s13 is an unknown quantity at this point
Feedback Score: 0 reviews
if you go with the shim option it needs to be well made and locate same as the prop flange
imo go with swapping rear ends of the prop to avoid diff bolts coming loose problems
the only possible is prop shaft imbalance and vibration,flip rear half 180 degrees
ANDY black s13 is offline   Reply With Quote
Old 01-07-2018, 10:42 AM   #5
Pixel6
 
Pixel6's Avatar
 
Join Date: Nov 2017
Location: Earf
Posts: 22
Trader Rating: (0)
Pixel6 is an unknown quantity at this point
Feedback Score: 0 reviews
It’s coming along.

Energy suspension bushings all around. Bunch of ISR adjustable bits. Made a mistake and cut out the collars on the main subframe bushings, so had to order new whiteline bushings, burn out the bushings that came with it, and press in the collar to add the ER bushings again.

Went ahead and got new wheel bearings, brake pads, rotors, sway bar links, axles, eccentric bolt lock-out bolts.

Rebuilding the calipers today, and welding the open diff that came with the setup.

Still need to source steel and rubber brake lines, then she’ll be ready to go on! (Although I’ll probably change the fluid use the LSD that’s on the car now, and use the LSD)

But yea, all painted and looking good!
Attached Images
File Type: jpg 217150B2-C09D-4CAC-A9E3-44643C20CE0C.jpg (217.1 KB, 17 views)
Pixel6 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™