36chambers

I need help I'm a rookie to splicing, I just did my 180sx turn signals and spliced them to the green and black wires from the stock harness.

I don't know how to splice into the stock side marker harness for my position lights.

I already have the pig tails for them but I don't know how to splice into them if I splice the harness wires into the Jdm 180sx side markers I have in the picture because the harness wont plug into the female socket if you can see.

ultimateirving

Cut both pig tails with enough wire to reconnect if u ever needed to.. Then solder/heat shrink the connections and be done ?

__________________
Z32 with lq4 swap
Desert Street Scene || Dssevents.com

36chambers

Thanks for the reply put the question is how do I splice up my 180sx position light pig tails to the two pigtails in the picture?

Mikester

OP, your post is not clear at all. What is the desired outcome? If it is just to join the two things in your pic, then follow post #2 and be done... or mix/match the USDM & JDM harnesses so that your OEM connectors work. If you are adding something into the mix, then you can get Tee splices.

__________________

36chambers

Seems pretty clear to me lol. First all I want to do is wire up my 180sx turn signals, positionlights, and jdm side markers. I have done the turb signals by splicing into the stock chuki turn signal harness.

But now I have trouble wiring up the position lights because I read you need to splice intp the side marker harness. But I have jdm side markers that I need to splice to the oem side marker harness as well. I dont really know how to splice 6 wires together I guess.