![]() |
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Zilvia Junkie
![]() Join Date: Dec 2009
Location: phoenix az
Age: 39
Posts: 422
Trader Rating: (1)
![]() Feedback Score: 1 reviews
|
new 3 row radiator sitting to high
This is on a redtop sr20det 240sx s13.I
got a megan 3 row radiator to help keep the temps lower.the radiator didn't come with gromments or any mounting brackets so I figuered I'd use the ones from the OEM radiator.once installed the clearance seems pretty off as the radiator sits so high the OEM top mounting brackets don't even touch the chassis.now I was considering cutting the bottom rubber mounting gromments down to bring the radiator down a bit then I thought maybe I'm not supposed to reuse the bottom mounting gromments?I'm worried though if I remove the bottom grommets the radiator will rub and over time create a leak.so should I remove completely or just cut them down?are these radiators not supposed turn reuse the OEM gromments? |
|
|
|
| Sponsored Links |
|
|
#2 |
|
Zilvia FREAK!
![]() Join Date: Dec 2013
Location: nation of Texas
Age: 25
Posts: 1,302
Trader Rating: (4)
![]() ![]() ![]() ![]() Feedback Score: 4 reviews
|
make sure its seated all the way done and into the grommets, sometimes they'll sorta stick up if they're not seated all the way down, ie the little stabbers at the bottom of the radiator into the grommets themselves.
I don't know if I would cut the grommets, as they are kinda important for you not to rub holes in it If all else fails you could always space up the bracket with some washers |
|
|
|
|
|
#4 |
|
Nissanaholic!
![]() Join Date: Feb 2012
Location: someone's sisters' pants
Posts: 2,288
Trader Rating: (37)
![]() Feedback Score: 37 reviews
|
Another one for not being seated all the way down. I've used s13/14 ka and sr radiators throughout the years and I've never had an issue other than not being seated all the way down. Granted I've only used stock and Koyos though.
__________________
I like my bikes how I like my b¡tches...naked! 2014 Triumph Street Triple |
|
|
|
|
|
#5 |
|
Premium Member
![]() Join Date: Jun 2003
Location: torrance, ca
Age: 39
Posts: 12,407
Trader Rating: (129)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 129 reviews
|
take some measurements and I can compare them to my stock s13 sr20 koyo for you. Mine fit fine.
|
|
|
|
|
|
#6 |
|
Zilvia FREAK!
![]() Join Date: Dec 2013
Location: nation of Texas
Age: 25
Posts: 1,302
Trader Rating: (4)
![]() ![]() ![]() ![]() Feedback Score: 4 reviews
|
My sr is hooked up to this cheap ebay triple core for an sr (dna motorsports) and it fit perfectly fine, im sure megan is better quality than that, so either they sent you the wrong radiator or the thing isn't stabbed in all the way
|
|
|
|
|
|
#7 |
|
Post Whore!
![]() Join Date: Dec 2004
Location: Poconos, PA
Age: 36
Posts: 8,030
Trader Rating: (58)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 58 reviews
|
To mimic all of the above, it's not seated in the gromets...it' snot like one out of the hundreds doesn't work from MR
__________________
![]() Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20! Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|