![]() |
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
AutoX Junkie
![]() |
This usually happens when applying say 40-70% throttle. I shift from 1st to 2nd and for about half a second nothing happens. This also causes a fairly harsh 1-2 shift b/c the revs aren't where they should be when I release the clutch. How can I fix this?
|
|
|
|
| Sponsored Links |
|
|
#3 |
|
AutoX Junkie
![]() |
Oh, ok. I must have just recently forgotten how. :rolleyes:
I don't know about your car, but most cars I've driven accelerate as soon as you hit the gas. And what do you mean don't pound on my gas? |
|
|
|
|
|
#4 |
|
I'm starting to get the feeling that this is the quality of comments we can expect from this board... driftrx ;p
My '91 manual has never had this problem, so I don't think its your driving style. Either fuel or spark. Since it is hard to check these while driving down the road making a 1-2 shift, I'd say its time to either buy a scan tool or take it to a shop to have the ECU codes read. Probably a throttle position sensor or something like that. I think www.240sx.org lists a way to read error codes without a scan tool. |
|
|
|
|
|
|
#6 |
|
AutoX Junkie
![]() |
Yes, just for like half a second.
It doesn't do it WOT and isn't noticeable when I'm barely accelerating. But when I'm kinda on it and shifting around 4000-4500, it does something like this... rrrrrRRRRRR :shift: mmmmrrrrRRRRRRRR :shift: rrrrrrrrRRRR....etc. |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|