18x10 +11 square - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ollie · 01-05-2010, 02:15 PM

Will I have any trouble fitting 18x10 et11s on the front of my s13 hatch? I know I can get them to fit fine in the rear but it seems the front might poke a little more.. I just have stock metal fenders but the fenders are pretty beat and I have a fender roller and am not afraid to pound them out with a hammer. Ill probably run a 235/35 falken or something close

This is only until I get overfenders. What size over fenders would work with this set up + how big of spacers in the rear?

TIA I am very new to this car but not to fitment.

fckillerbee · 01-05-2010, 02:21 PM

Quote:

Originally Posted by Ollie

Will I have any trouble fitting 18x10 et11s on the front of my s13 hatch? I know I can get them to fit fine in the rear but it seems the front might poke a little more.. I just have stock metal fenders but the fenders are pretty beat and I have a fender roller and am not afraid to pound them out with a hammer. Ill probably run a 235/35 falken or something close

This is only until I get overfenders. What size over fenders would work with this set up + how big of spacers in the rear?

TIA I am very new to this car but not to fitment.

then measure it. you can figure it out mathematically....or you can click the "search" and see where you post ends up....but this is zilvia...you have 6 posts..and I'm 100% sure you didn't search...cause we have threads for this.

Ollie · 01-05-2010, 02:33 PM

word.. I have been searching and everyone runs crazy offsets in the rear and milder setups up front.. I dont see too many square set ups. I cant measure because I still have a 4 lug and these are 5 and I also havent bought the wheels yet.

but you are correct sir. i can do the math, i was just being a lazy ass nub

*fliprayzin240sx* · 01-07-2010, 05:09 AM

Its doable but its not just the fenders you'd have to worry about. You will be rubbing all over the wheel well. Time to relocate the harness and beat the shit out of the wheel well to get some full lock clearance.

TurboMex · 01-11-2010, 07:53 PM

Or you can tub it, looks super gangster and no rubb-age!

rubhamusan · 01-13-2010, 01:16 PM

9.5 +15 sticks out about 15mm so ad 12.6 and them add 5mm on that so maybe stick out about 30ish

half-breed · 01-13-2010, 04:18 PM

235/35 on a 18x11? dont you think thats a little narrow for such a wide rim?

boostinS14 · 01-17-2010, 10:08 AM

Quote:

Originally Posted by half-breed

235/35 on a 18x11? dont you think thats a little narrow for such a wide rim?

yes that is pretty narrow for such a wide rim. id say 245/40/18

jrocslider · 01-17-2010, 11:25 AM

Quote:

Originally Posted by half-breed

235/35 on a 18x11? dont you think thats a little narrow for such a wide rim?

He said 18x10+11

GripTerror · 01-19-2010, 09:35 AM

265/35/18 or 285/30/18 be a man.

half-breed · 01-21-2010, 04:01 PM

Sorry 18x10 you should still have 275 or larger on the it. If you do the math a 10 inch wide rim is actually closer to 11 inches lip to lip because 10 inches is the inside of the rim. so 25.4 millimeters equals 1 inch so 11x25.4=279.4

01-05-2010, 02:15 PM	#1
Ollie Leaky Injector Join Date: Sep 2009 Location: Albany, NY Age: 31 Posts: 106 Trader Rating: (0) Feedback Score: 0 reviews	18x10 +11 square Will I have any trouble fitting 18x10 et11s on the front of my s13 hatch? I know I can get them to fit fine in the rear but it seems the front might poke a little more.. I just have stock metal fenders but the fenders are pretty beat and I have a fender roller and am not afraid to pound them out with a hammer. Ill probably run a 235/35 falken or something close This is only until I get overfenders. What size over fenders would work with this set up + how big of spacers in the rear? TIA I am very new to this car but not to fitment.

01-07-2010, 05:09 AM	#4
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Its doable but its not just the fenders you'd have to worry about. You will be rubbing all over the wheel well. Time to relocate the harness and beat the shit out of the wheel well to get some full lock clearance. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2010, 02:33 PM	#3
Ollie Leaky Injector Join Date: Sep 2009 Location: Albany, NY Age: 31 Posts: 106 Trader Rating: (0) Feedback Score: 0 reviews	word.. I have been searching and everyone runs crazy offsets in the rear and milder setups up front.. I dont see too many square set ups. I cant measure because I still have a 4 lug and these are 5 and I also havent bought the wheels yet. but you are correct sir. i can do the math, i was just being a lazy ass nub

01-11-2010, 07:53 PM	#5
TurboMex Join Date: Jun 2009 Location: M-town Age: 36 Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	Or you can tub it, looks super gangster and no rubb-age!

01-13-2010, 01:16 PM	#6
rubhamusan Zilvia Member Join Date: Oct 2008 Location: Knoxville,TN Age: 48 Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews	9.5 +15 sticks out about 15mm so ad 12.6 and them add 5mm on that so maybe stick out about 30ish

01-13-2010, 04:18 PM	#7
half-breed Join Date: Jan 2010 Location: buffalo Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	235/35 on a 18x11? dont you think thats a little narrow for such a wide rim?

01-19-2010, 09:35 AM	#10
GripTerror Zilvia Addict Join Date: Nov 2009 Location: Canada Age: 36 Posts: 685 Trader Rating: (0) Feedback Score: 0 reviews	265/35/18 or 285/30/18 be a man.

01-21-2010, 04:01 PM	#11
half-breed Join Date: Jan 2010 Location: buffalo Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	Sorry 18x10 you should still have 275 or larger on the it. If you do the math a 10 inch wide rim is actually closer to 11 inches lip to lip because 10 inches is the inside of the rim. so 25.4 millimeters equals 1 inch so 11x25.4=279.4