Stock ka24de trying to make power - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nicks13chandler · 10-25-2013, 09:47 PM

Alright this may be a dumb set up but I've never seen it done nor do I know if it would work or even be worth it, but here it goes. I have a stock ka24de with 5 degree advanced timing on 93 octane, aftermarket header and Megan catback exhaust. Also took out the air box and put a cone filter (lol). But anyways I have 460cc injectors out of my rx7 was wondering if it would be worth it to put into the ka and if so would I have I change maf, intake manifold, throttle body, intake or anything for it to make sense or power. I know I'd have to get a tune but would there be anything else that's recommended to get done with just the upgrades injectors. I've never seen it done on a stock motor and I kind of want to try it out. Let me know if anyone has tried this and what results they got. Thanks.

hatchtastic · 10-25-2013, 09:59 PM

Keep stock injectors. Get yourself an n60 or n62 maf and a decent tune and call it a day. You should be pushing around 160 ish to the wheels depending on tune.

nicks13chandler · 10-25-2013, 10:03 PM

You don't think putting the 460's on a stock motor would do much?

hatchtastic · 10-25-2013, 10:08 PM

There would be no benefit to putting larger injectors in with the mods that you have. If you wanted to stay na and let's say put the kae pistons in then I would make sense. But without changing compression with either forced induction or taller pistons there is no point. The maf will make a big difference tho but you will need at the very least an safc to run it

nicks13chandler · 10-25-2013, 10:16 PM

Single cam pistons? Hmm I just want to throw something quick together to get a little more power. Being basically stock is getting boring. Would I need single cam rods too or just the piston heads?

zerodameaon · 10-26-2013, 02:26 AM

You would have to run 97 octane for the compression you would be getting. It might be a little faster but its not going to be earth shattering. Do a google search and you will find so much info on the swap, more than any of us are going to bother repeating. Some people say they are running 91 just fine but the few I have seen could never get them tuned right running 91.

sleepyS14se · 10-30-2013, 10:23 AM

i would like more info on upgrading ONLY the MAF. I notice the inside hole is a bit small.

what MAF do i need and will it work with my original ka24de ecu (95 s14)

i don't want to tune or have to do dumb crap in order to go to a bigger maf, so if a lot is required i will just leave it be.

Drifting Kalamari · 11-04-2013, 10:52 PM

With a MAF change it will definitely need a tune to make her run well. I have seen people frankenstein a stock KA MAF by taking it apart a rebuilding onto a larger inner diam pipe... N60 or N62 would be much simpler.

sleepyS14se · 11-05-2013, 07:24 AM

^ could you elaborate on "n60" /"n62"

what is it and would i have to tune afterward?

NoPistons! · 11-08-2013, 07:16 PM

Sell the ka for $5000 on craigslist then buy a v8. Problem solved.

Welcome to zilvia......enjoy your stay. Pray......A LOT.

10-25-2013, 09:47 PM	#1
nicks13chandler Join Date: Sep 2012 Location: south jersey Age: 29 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Stock ka24de trying to make power Alright this may be a dumb set up but I've never seen it done nor do I know if it would work or even be worth it, but here it goes. I have a stock ka24de with 5 degree advanced timing on 93 octane, aftermarket header and Megan catback exhaust. Also took out the air box and put a cone filter (lol). But anyways I have 460cc injectors out of my rx7 was wondering if it would be worth it to put into the ka and if so would I have I change maf, intake manifold, throttle body, intake or anything for it to make sense or power. I know I'd have to get a tune but would there be anything else that's recommended to get done with just the upgrades injectors. I've never seen it done on a stock motor and I kind of want to try it out. Let me know if anyone has tried this and what results they got. Thanks.

10-30-2013, 10:23 AM	#7
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	i would like more info on upgrading ONLY the MAF. I notice the inside hole is a bit small. what MAF do i need and will it work with my original ka24de ecu (95 s14) i don't want to tune or have to do dumb crap in order to go to a bigger maf, so if a lot is required i will just leave it be. __________________ 95 S14 se RB25DET 348whp

11-05-2013, 07:24 AM	#9
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	^ could you elaborate on "n60" /"n62" what is it and would i have to tune afterward? __________________ 95 S14 se RB25DET 348whp

11-08-2013, 07:16 PM	#10
NoPistons! Zilvia Junkie Join Date: Jan 2009 Location: Carolina Posts: 548 Trader Rating: (1) Feedback Score: 1 reviews	Sell the ka for $5000 on craigslist then buy a v8. Problem solved. Welcome to zilvia......enjoy your stay. Pray......A LOT. __________________ Just another broke ass drifter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-25-2013, 09:59 PM	#2
hatchtastic Zilvia Member Join Date: Feb 2013 Location: phoenix az Age: 31 Posts: 281 Trader Rating: (6) Feedback Score: 6 reviews	Keep stock injectors. Get yourself an n60 or n62 maf and a decent tune and call it a day. You should be pushing around 160 ish to the wheels depending on tune.

10-25-2013, 10:03 PM	#3
nicks13chandler Join Date: Sep 2012 Location: south jersey Age: 29 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	You don't think putting the 460's on a stock motor would do much?

10-25-2013, 10:08 PM	#4
hatchtastic Zilvia Member Join Date: Feb 2013 Location: phoenix az Age: 31 Posts: 281 Trader Rating: (6) Feedback Score: 6 reviews	There would be no benefit to putting larger injectors in with the mods that you have. If you wanted to stay na and let's say put the kae pistons in then I would make sense. But without changing compression with either forced induction or taller pistons there is no point. The maf will make a big difference tho but you will need at the very least an safc to run it

10-25-2013, 10:16 PM	#5
nicks13chandler Join Date: Sep 2012 Location: south jersey Age: 29 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Single cam pistons? Hmm I just want to throw something quick together to get a little more power. Being basically stock is getting boring. Would I need single cam rods too or just the piston heads?

11-04-2013, 10:52 PM	#8
Drifting Kalamari Zilvia Member Join Date: Jul 2012 Location: Woodstock Age: 38 Posts: 176 Trader Rating: (0) Feedback Score: 0 reviews	With a MAF change it will definitely need a tune to make her run well. I have seen people frankenstein a stock KA MAF by taking it apart a rebuilding onto a larger inner diam pipe... N60 or N62 would be much simpler.