Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 10-08-2020, 09:35 PM   #1
solo_ryder
Zilvia Junkie
 
solo_ryder's Avatar
 
Join Date: Mar 2011
Location: The True North
Posts: 529
Trader Rating: (18)
solo_ryder is making a name for him/her selfsolo_ryder is making a name for him/her self
Feedback Score: 18 reviews
Anyone with Nismo subframe bushings?

S14

Got the subframe out, do I need to remove the outer "cup" or leave it it? Seems like the outer cup is supposed to be removed (you would leave in with poly bushings) but I dont want to remove it and find out I wasnt supposed to do that..

Do the rears have a outer cup/shell as well? Have not started on those yet.

Any help would be good
solo_ryder is offline   Reply With Quote
Sponsored Links
Old 10-09-2020, 04:30 AM   #2
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
The sleeve "cup" has tobe removed. The nismo bushings are a direct replacement, means the entire old bushing needs tobe removed.
S14rebuild is offline   Reply With Quote
Old 10-09-2020, 06:01 AM   #3
zombiewolf513
BANNED
 
Join Date: Mar 2011
Location: AZ
Age: 33
Posts: 1,682
Trader Rating: (6)
zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513
Feedback Score: 6 reviews
Yeah, the metal shells have to come out. PITA.

Burn out all the rubber, scrape off what you can or itll bind the saw blade.

On one side of the shell theres a lip that mushrooms over the subframe. Use a hammer and chisel to start separating what you can reach of that lip from the subframe just a little.

Youll be cutting a notch in the shell, so chisel a part of the shell's lip where you intend to cut so that it sticks straight up.

Use a 24 tooth/inch metal hacksaw blade to cut a notch in it. Cut the notch on the outside edges where you have full access with a chisel and hammer. Start with the lip, then put the blade through the hole, then attach blade to handle and cut the inside. Dont use a fucking sawzall or youre gonna rek your subframe. Take your time to cut all the way through the shell, try not to cut into the subframe.

Hammer around the perimeter to spiral the shell into a curl. You'll probably find you didnt saw all the way through. Finish cutting it before trying to curl it any further or else its gonna be hard af to remove, lets put it that way.

If you did it right, it should just fall out while youre curling it. But sometimes we fuck up and need to carefully whack it out from the other side by the shell's edge, work your way around to push it out evenly. but try not to scrape up the subframe.


Last edited by zombiewolf513; 10-09-2020 at 05:32 PM.. Reason: Pic added
zombiewolf513 is offline   Reply With Quote
Old 10-12-2020, 04:04 PM   #4
solo_ryder
Zilvia Junkie
 
solo_ryder's Avatar
 
Join Date: Mar 2011
Location: The True North
Posts: 529
Trader Rating: (18)
solo_ryder is making a name for him/her selfsolo_ryder is making a name for him/her self
Feedback Score: 18 reviews
Thanks guys, I cut the front and rear cups with a sawzall carefully and chiseled the out the front was pretty easy, back was abit more hammering but they came out. Also measured it with a caliper and got roughly 66mm on the bushing and the subframe, it was 63mm~ with the outer shell in
solo_ryder is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™