|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
 |
|
|
Thread Tools | Display Modes |
03-02-2013, 11:28 PM
|
#1 |
|
Nissanaholic!
 Join Date: Jul 2006
Location: Tampa, Florida
Posts: 1,677
Trader Rating: (14)
 Feedback Score: 14 reviews
|
Rb25 top feed adapter solution
A little back story.. I have a series 2 rb25, using a greddy style intake manifold. I wanted to switch to top feed and found a set of Deatchwerks rb20/26 top feed injectors (Bosch ev14). The issue I had was the injectors were slimmer than the injector port itself. After doing some homework, I tried many other Nissan top feed injector insulators and nothing came close to a snug fit.
 Uploaded with ImageShack.us So i kept on digging and trying different options. Well I found a solution!! I found a company here in Florida (Fuelinjectorclinic.com) that sells solid spacers, made for a Supra top feed conversion. If this is old new, then I am late to the party and my bad for the thread. If not! Then I hope this helps others that run into this problem!  Uploaded with ImageShack.us Pic here is the injector port, without the oem insulator  Uploaded with ImageShack.us The spacer they sell fits right into the port and allows the injector to sit in right where it should sit, had it been a factory set up.  Uploaded with ImageShack.us Final product! Now you can utilize other Top feed injectors with your rb25 greddy plenum! Very simple and fast Solution (besides the obvious "go buy side feed" answer) Hope this helps the Rb community out!  Uploaded with ImageShack.us |
|
|
| Sponsored Links |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
