sr20det oil pump o ring and oil pickup tube o ring - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bckfire · 01-23-2018, 08:22 PM

soo....let me start by saying that this is my first post in this forum, and actually my very first post on any forum...soo hang with me for a sec but ive decided to document this somewhere since it may be helpful for some.
I am currently doing a rebuild on my sr and i noticed that my oil pump o-ring that meets the block with the front cover is flat..not using it...same with my oil pick up tube o-ring....i looked these up online and they are between $4-$10 and yes that means ill have to wait for it to arrive....well i recently found out that there's a lot of subaru parts that fit on a 240sx...and maybe ill make a separate tread later about them but for now the subaru tribeca 3.0 front timing cover shares the same o-ring size as the sr oil pump o ring, the subaru part is 806916080(o ring-16. 1x2.3) its about $1.73.
I also found an o-ring that fits perfectly on my oil pick up tube, i will have the part number tomorrow since i was able to get my hands on it late today at work, figure this may help some guys that are willing to drive to their local subaru dealer to get a $2 o-ring if they need it ASAP or are inpatient like me.

***Future240*** · 01-24-2018, 09:38 AM

Thread had to be approved. Bumping for visibility.

battery1882 · 01-24-2018, 11:08 AM

Quote:

Originally Posted by bckfire

soo....let me start by saying that this is my first post in this forum, and actually my very first post on any forum...soo hang with me for a sec but ive decided to document this somewhere since it may be helpful for some.
I am currently doing a rebuild on my sr and i noticed that my oil pump o-ring that meets the block with the front cover is flat..not using it...same with my oil pick up tube o-ring....i looked these up online and they are between $4-$10 and yes that means ill have to wait for it to arrive....well i recently found out that there's a lot of subaru parts that fit on a 240sx...and maybe ill make a separate tread later about them but for now the subaru tribeca 3.0 front timing cover shares the same o-ring size as the sr oil pump o ring, the subaru part is 806916080(o ring-16. 1x2.3) its about $1.73.
I also found an o-ring that fits perfectly on my oil pick up tube, i will have the part number tomorrow since i was able to get my hands on it late today at work, figure this may help some guys that are willing to drive to their local subaru dealer to get a $2 o-ring if they need it ASAP or are inpatient like me.

I wouldn't risk it personally. if that seal goes bad, you will lose pressure and there goes your bearings. You may get away with it but not worth the risk.

s13silvia123 · 01-24-2018, 12:51 PM

If it meets ANSI, ASME, or SAE standards. I approve, o-rings are common parts all around the globe must meet by these standards. they are not custom parts by any means. industries have been using them and cross referencing them to engineer into products

Hoffman5982 · 01-24-2018, 11:41 PM

If I'm not mistaken it's not just simply an o-ring right? It's one of these right?

If so, go to your Nissan dealer part department. Mine had them in stock. Other gaskets can usually be had in a day or two.

s13silvia123 · 01-25-2018, 05:56 AM

proper name is oil seal its not even a o-ring

use this to reference it

common parts? NO? YES?

http://www.tristate-bearing.com/pdf/...al_catalog.pdf

if you're having problems to understand then read this book

engineering drawing and design 7th edition

then move to this book

Machinery's Handbook
Book by Erik Oberg

everything is in there for you to understand

Hoffman5982 · 01-25-2018, 12:37 PM

Quote:

Originally Posted by s13silvia123

proper name is oil seal its not even a o-ring

use this to reference it

common parts? NO? YES?

http://www.tristate-bearing.com/pdf/...al_catalog.pdf

if you're having problems to understand then read this book

engineering drawing and design 7th edition

then move to this book

Machinery's Handbook
Book by Erik Oberg

everything is in there for you to understand

You were too busy being a condescending prick to look it up yourself and see that even Nissan refers to it as an o ring

s13silvia123 · 01-25-2018, 01:19 PM

Quote:

Originally Posted by Hoffman5982

You were too busy being a condescending prick to look it up yourself and see that even Nissan refers to it as an o ring

lmao LOOK IT UP

books sitting in front me

dont get mad now

Hoffman5982 · 01-25-2018, 01:46 PM

Again, we’re simply going off what Nissan calls them. I trust their judgement more than some douchebag on the internet. Enjoy your books

s13silvia123 · 01-25-2018, 02:03 PM

Ok keyboard warrior

Butthurt much!

LMAO

Hoffman5982 · 01-25-2018, 03:06 PM

Keyboard warrior? You do realize that YOU came into a civil discussion with no intent other than to belittle someone over their choice of words.

5280VertDET · 01-25-2018, 04:15 PM

Quote:

Originally Posted by s13silvia123

proper name is oil seal its not even a o-ring

use this to reference it

common parts? NO? YES?

http://www.tristate-bearing.com/pdf/...al_catalog.pdf

if you're having problems to understand then read this book

engineering drawing and design 7th edition

then move to this book

Machinery's Handbook
Book by Erik Oberg

everything is in there for you to understand

https://www.reddit.com/r/iamverysmart/

s13silvia123 · 01-25-2018, 06:02 PM

Quote:

Originally Posted by Hoffman5982

You were too busy being a condescending prick to look it up yourself and see that even Nissan refers to it as an o ring

Quote:

Originally Posted by Hoffman5982

Again, we’re simply going off what Nissan calls them. I trust their judgement more than some douchebag on the internet. Enjoy your books

Yeap poor choice of words LMAO

01-23-2018, 08:22 PM	#1
bckfire Join Date: Dec 2017 Location: covington, LA Age: 26 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	sr20det oil pump o ring and oil pickup tube o ring soo....let me start by saying that this is my first post in this forum, and actually my very first post on any forum...soo hang with me for a sec but ive decided to document this somewhere since it may be helpful for some. I am currently doing a rebuild on my sr and i noticed that my oil pump o-ring that meets the block with the front cover is flat..not using it...same with my oil pick up tube o-ring....i looked these up online and they are between $4-$10 and yes that means ill have to wait for it to arrive....well i recently found out that there's a lot of subaru parts that fit on a 240sx...and maybe ill make a separate tread later about them but for now the subaru tribeca 3.0 front timing cover shares the same o-ring size as the sr oil pump o ring, the subaru part is 806916080(o ring-16. 1x2.3) its about $1.73. I also found an o-ring that fits perfectly on my oil pick up tube, i will have the part number tomorrow since i was able to get my hands on it late today at work, figure this may help some guys that are willing to drive to their local subaru dealer to get a $2 o-ring if they need it ASAP or are inpatient like me.

01-24-2018, 12:51 PM	#4
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 39 Posts: 3,256 Trader Rating: (16) Feedback Score: 16 reviews	If it meets ANSI, ASME, or SAE standards. I approve, o-rings are common parts all around the globe must meet by these standards. they are not custom parts by any means. industries have been using them and cross referencing them to engineer into products __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

01-24-2018, 11:41 PM	#5
Hoffman5982 Nissanaholic! Join Date: Jan 2009 Location: Definitely NOT FL.... Age: 29 Posts: 2,491 Trader Rating: (25) Feedback Score: 25 reviews	If I'm not mistaken it's not just simply an o-ring right? It's one of these right? If so, go to your Nissan dealer part department. Mine had them in stock. Other gaskets can usually be had in a day or two. __________________

01-25-2018, 05:56 AM	#6
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 39 Posts: 3,256 Trader Rating: (16) Feedback Score: 16 reviews	proper name is oil seal its not even a o-ring use this to reference it common parts? NO? YES? http://www.tristate-bearing.com/pdf/...al_catalog.pdf if you're having problems to understand then read this book engineering drawing and design 7th edition then move to this book Machinery's Handbook Book by Erik Oberg everything is in there for you to understand __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

01-25-2018, 01:46 PM	#9
Hoffman5982 Nissanaholic! Join Date: Jan 2009 Location: Definitely NOT FL.... Age: 29 Posts: 2,491 Trader Rating: (25) Feedback Score: 25 reviews	Again, we’re simply going off what Nissan calls them. I trust their judgement more than some douchebag on the internet. Enjoy your books __________________

01-25-2018, 02:03 PM	#10
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 39 Posts: 3,256 Trader Rating: (16) Feedback Score: 16 reviews	Ok keyboard warrior Butthurt much! LMAO __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

01-25-2018, 03:06 PM	#11
Hoffman5982 Nissanaholic! Join Date: Jan 2009 Location: Definitely NOT FL.... Age: 29 Posts: 2,491 Trader Rating: (25) Feedback Score: 25 reviews	Keyboard warrior? You do realize that YOU came into a civil discussion with no intent other than to belittle someone over their choice of words. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode