KA-T Picture/Video thread :D - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

punxva · 06-24-2011, 12:59 PM

^ Fixed it for ya

nevertheless · 06-24-2011, 01:05 PM

Yeaaaah! haha
I hate Srt-4s..

jamg · 06-24-2011, 01:09 PM

guys running with stock internals-

how is it holding up?

how many miles did the motor have before you went boost?

mewantkouki · 06-24-2011, 01:17 PM

It's all in the tune really. I got my car with 72k on it. Turbocharged it around 85kish. Drove the living shit out of it all the time, nuked one .50 trim, upgraded to a beast mode precision turbo and it handled everything I threw at it. My car was turbo from November 2007- December 2010. Then I made the decision to go with an sr to "try something new". Of course my sr committed suicide in epic fashion... Good news is, I have another ka I'm actually going to build this time around and shoot for higher power. Only problems I noticed were that the turbocharger worsened my valve stem seal leak. I attribute that to the engine being 15 years old though.

That srt4 video brings back memories. hahaha I wish I'd videotaped the smoke screen that my car let out the next day when the turbo breathed it's last.

Skraight · 06-24-2011, 01:30 PM

Just got my GT2871 .86 in the mail and my 850cc top mount RC's. Ready to turn the boost up.

jdmspooge · 06-24-2011, 04:29 PM

Hahaha it's always fun to walk on the SRT's and the STI's. Sad how those guys have puzzled looks on their faces when they get romped on hahaha. Love it daily!

ke70 sr20det · 06-24-2011, 04:45 PM

Quote:

Originally Posted by punxva

gt2871r
built bottom
440cc injectors
xcessive manifold
10lbs for no until i fix my profec

wow damn its clean work punxva my kinda taste.. i am basically an sr20 lover but recently ka`s are attracting me these days becuz there is no rocker arm problems and 2.4 ive always seen good torque numbers compare to hps .. good luck

***CrimsonRockett*** · 06-24-2011, 04:51 PM

Punxva's is the only one that's really impressed me so far. The rest have been "okay".

Still waiting to see someone with a KA-T set up including a fuse box relocation, full wire tuck, PS reservoir relocated, BMC and Clutch master hardlines relocated (err, using ChaseBays SS lines or something similar), top mount manifold, and shiny TIG'd IC piping.

That'd be neat.

ke70 sr20det · 06-24-2011, 04:59 PM

i love kat torque for streets ... his setup is is simple but eye catching no mess in the bay....

punxva · 06-24-2011, 05:34 PM

thanks guys, i have changed a few things but a fuse box relocation is in the works

future · 06-24-2011, 05:56 PM

Some of you huys are making me want to just throw 15lbs of boost at the ka I have and say fuck rebuilding my spare one lol.

s14tan · 06-24-2011, 06:52 PM

Quote:

Originally Posted by CrimsonRockett

Punxva's is the only one that's really impressed me so far. The rest have been "okay".

Still waiting to see someone with a KA-T set up including a fuse box relocation, full wire tuck, PS reservoir relocated, BMC and Clutch master hardlines relocated (err, using ChaseBays SS lines or something similar), top mount manifold, and shiny TIG'd IC piping.

That'd be neat.

That would be dope to see, I would rather prefer Function > Form.

Quote:

Originally Posted by secondtonone317

YouTube - ‪SecondToNone aka. Yogi Bishnu 1998 240sx turbo Ka24de on Pump Gas 23PSI 457WHP‬&rlm;

Engine
Built KA24DE
Arias pistols 8:8:1 compression .20over
K1 rods
Clevite Bearings
ETC!
Working on installing a trunk mounted meth kit.

Nice setup dude, thanks for answering.

Skilz10179 · 06-24-2011, 06:53 PM

Skilz10179 KA-T coming 2012....

I already have a few parts from previous cars, currents parts pile...

Garrett GT3076R (.63 turbine housing)
Custom intercooler (Griffen core with HKS end tanks)
Greddy Type S BOV
Greddy Profec B
Turbonetics Evolution 35mm wastegate
Innovative LM1 wide band

I had my heart set on a Peak Boost turbo manifold but a friend was just telling me they went out of business, anyone know if thats true???? If Peak boost is gone what is the next best manifold other than Full Race, must be a top mount, available with a T3 flange and a 35/38mm wastegate flange and be great quality..........?

And heres a pic i snapped just for this thread to keep things exciting!!!!!!!!!!!!!!!!!!!

newslidz · 06-24-2011, 07:30 PM

CrimsonRockett

limited on tools so was forced to purchase main kit but still changing it a little and I will have some more for you later

-10 fitting will be welded to pump and 90* will be on the return so its not 100% stock

DRFT180 · 06-24-2011, 07:37 PM

AMS rebuild kit
Stock head
BikiRom
AMS GT32
FC Oil Cooler

During the rebuild a few years ago.

Engine bay soon after completion.

Some things have changed, mostly switching to a mid-mount setup. So the intake, charge piping, and recirc. setup has been moved around. I'll have to get some more up to date recent pics.

somewhat recent action shot

enjoy

***CrimsonRockett*** · 06-24-2011, 07:40 PM

Newslidz, sorry I missed yours (was a little busy when I posted). It's definitely impressive. I personally dislike having the OEM wiring/fuse boxes in the engine bay. So, relocating and tucking is on my to-do list.

Any reason why you chose E-Fan's over the stock clutch fan/fan shroud?

Thought about ordering a set of E-fans myself (cleaner look), but the fan shroud works better in my opinion.

Quote:

Originally Posted by s14tan

That would be dope to see, I would rather prefer Function > Form.

I agree with you completely, but when both function and form are done properly, you get the best of both worlds. Shit works awesome AND it looks awesome.

Here's one I found on the net quite some time ago.

I'm aiming for something similar to this, but with the things I mentioned above. Fuseboxes relocated, hardlines relocated, and PS reservoir relocated.

DRFT180 · 06-24-2011, 07:48 PM

What I ended up doing with my hardlines

newslidz · 06-24-2011, 07:48 PM

Quote:

Originally Posted by CrimsonRockett

Newslidz, sorry I missed yours (was a little busy when I posted). It's definitely impressive. I personally dislike having the OEM wiring/fuse boxes in the engine bay. So, relocating and tucking is on my to-do list.

Any reason why you chose E-Fan's over the stock clutch fan/fan shroud?

Thought about ordering a set of E-fans myself (cleaner look), but the fan shroud works better in my opinion.

No problem I know its still not much but this isnt a build thread so i wont post before pics but the car came along way..

I do like the look of e fans just because they are close and my clutch fan had gone out and never replaced it..

plus for some reason I always have cars that like to overheat no matter how much cooling power i have so atleast i can put them on a acc timer or set them to run till its reached a set temp

LINK TO BUILD JUST IN CASE : http://zilvia.net/f/chat/354516-ka-g...many-pics.html

newslidz · 06-24-2011, 07:57 PM

mxsx25 · 06-24-2011, 09:54 PM

jrs · 06-25-2011, 12:01 AM

This is what I've got ...
Custom Arias 8:8:1, Eagle Rods, Clevite Bearings, Apr Head Stud and Main Kit, Spec Stage 3, already ordered wideband and 550's, havent bought the turbo but it'll be a garret t04e, wastegate tial, fmic, downpipe, greddy rs, manifold treadstone, then I'll get cometic headgasket, walbro, and nistune for tuning, what else would you guys recommend me? Is this enough to made 350whps?
Jorge

Spring Break '92 · 06-25-2011, 12:39 AM

jrs, sounds good. You will also need a Z32 MAF. From what Ive read on KA-T.org, people have found the Cometic HG to be somewhat problematic and the general consensus is to go with a Fel-Pro HG. Personally I am on a Cometic and have had no problems but if it ever fails I am going Fel-Pro.

s14tan · 06-25-2011, 12:55 AM

Quote:

Originally Posted by CrimsonRockett

I agree with you completely, but when both function and form are done properly, you get the best of both worlds. Shit works awesome AND it looks awesome.

Here's one I found on the net quite some time ago.

I'm aiming for something similar to this, but with the things I mentioned above. Fuseboxes relocated, hardlines relocated, and PS reservoir relocated.

That would look really good to see, the Chasebays engine bay IMO has set the bar for the cleanest KA engine bay by far. If there was a bay that Looked like that and put down a good amount of power would be full of win.

DRFT180: High Fvcking Five dude! that looks damn good! what lines/fittings did you use?

ej2civic · 06-25-2011, 06:28 AM

Quote:

Originally Posted by turbo-travis

Very nice setup, what tuning are you using?

I had an EFI specialist rom tune with a SAFC neo, I built that setup several years ago...I have since smartened up and learned how to to tune myself. If i where to do it again i'd go nistune or that new nismotronics...Car ran good, smooth and strong for 15k miles. Only complaint was i wrecked 3 trans in that time. I've since moved on from the KA but i'm going to be rebuilding that short block and throwing it in a buddies car.

bboyoracle · 06-25-2011, 06:33 AM

posted in wrong thread.......

s14fbs · 06-25-2011, 06:52 AM

finally have a chance to post specs

cp pistons .20 over 9-1
eagle rods
arp main studs
arp headstuds
clevite coated bearings

new nissan oem
water pump
oil pump
timing chains
guides
thermostat
valve cover gasket
oil pan gasket

cometic headgasket
rebuilt stock head new felrpo valves seals ect
s13 cams and head
s14 tranny with short shifter
spec stage 3 clutch
lightened flywheel

crank was polised
internals were all balanced
line honed
.20 over bore
surfaced block and head

turbo
turbonetics .50 63 t/3 t/4 ceramic coated
tgs manifold cermamic coasted
tial wastegate 38mm ]
jim wolf fuel rail
rc 750cc rc injectors
pbm high mount ic
greddy rs bov

i run the setup at 18psi

xpinoyxmk · 06-25-2011, 07:14 AM

This engine bay is so clean:

GroundPerformance · 06-25-2011, 08:43 AM

^^ Config look familiar.. Looks like it will be running on running the SR Engine Management like mine to run COP. I'm doing the same thing now. Maybe a writeup soon to convert KA ro run SR EMS.

*ManoNegra* · 06-25-2011, 09:46 AM

Quote:

Originally Posted by DRFT180

What I ended up doing with my hardlines

I like it and the vacuum box

Quote:

Originally Posted by Spring Break '92

jrs, sounds good. You will also need a Z32 MAF. From what Ive read on KA-T.org, people have found the Cometic HG to be somewhat problematic and the general consensus is to go with a Fel-Pro HG. Personally I am on a Cometic and have had no problems but if it ever fails I am going Fel-Pro.

we've used Cometic HGs
if you prep the surfaces well shouldn't be a problem

fckillerbee · 06-25-2011, 10:49 AM

buddy's old setup...should be a dead give away.

sorry for the shitty pics. I couldn't find a good one that he had.

Schelley Racing News
http://www.youtube.com/watch?v=56NkJ4WXfhQ
http://www.youtube.com/watch?v=0rVaM...eature=related
always enjoyed watching him drive....

06-24-2011, 01:05 PM	#62
nevertheless Zilvia Junkie Join Date: Jan 2009 Location: omaha, ne Age: 30 Posts: 502 Trader Rating: (5) Feedback Score: 5 reviews	Yeaaaah! haha I hate Srt-4s.. __________________ Jessefuckinwood Street Prowl

06-24-2011, 04:59 PM	#69
ke70 sr20det Leaky Injector Join Date: Jan 2011 Location: dubai Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	i love kat torque for streets ... his setup is is simple but eye catching no mess in the bay.... __________________ ke70 corolla sr20det redtop t28 s15 7 psi stock motor

06-24-2011, 06:53 PM	#73
Skilz10179 Zilvia Member Join Date: Nov 2008 Location: Detroit Age: 41 Posts: 162 Trader Rating: (3) Feedback Score: 3 reviews	Skilz10179 KA-T coming 2012.... I already have a few parts from previous cars, currents parts pile... Garrett GT3076R (.63 turbine housing) Custom intercooler (Griffen core with HKS end tanks) Greddy Type S BOV Greddy Profec B Turbonetics Evolution 35mm wastegate Innovative LM1 wide band I had my heart set on a Peak Boost turbo manifold but a friend was just telling me they went out of business, anyone know if thats true???? If Peak boost is gone what is the next best manifold other than Full Race, must be a top mount, available with a T3 flange and a 35/38mm wastegate flange and be great quality..........? And heres a pic i snapped just for this thread to keep things exciting!!!!!!!!!!!!!!!!!!! __________________ Last edited by Skilz10179; 06-26-2011 at 04:30 PM..

06-24-2011, 07:30 PM	#74
newslidz Zilvia Member Join Date: Feb 2009 Location: ORLANDO FL... Age: 31 Posts: 259 Trader Rating: (3) Feedback Score: 3 reviews	*CrimsonRockett* limited on tools so was forced to purchase main kit but still changing it a little and I will have some more for you later -10 fitting will be welded to pump and 90* will be on the return so its not 100% stock __________________ JUST A RED TOP SR

06-24-2011, 07:37 PM	#75
DRFT180 Zilvia Addict Join Date: Nov 2003 Location: Louisiana Posts: 655 Trader Rating: (7) Feedback Score: 7 reviews	AMS rebuild kit Stock head BikiRom AMS GT32 FC Oil Cooler During the rebuild a few years ago. Engine bay soon after completion. Some things have changed, mostly switching to a mid-mount setup. So the intake, charge piping, and recirc. setup has been moved around. I'll have to get some more up to date recent pics. somewhat recent action shot enjoy __________________ S14 Build

06-24-2011, 01:09 PM	#63
jamg Nissanaholic! Join Date: May 2009 Location: GA Posts: 2,106 Trader Rating: (7) Feedback Score: 7 reviews	guys running with stock internals- how is it holding up? how many miles did the motor have before you went boost?

06-24-2011, 01:17 PM	#64
mewantkouki Zilvia FREAK! Join Date: Nov 2007 Location: Orlando, Fl Age: 35 Posts: 1,221 Trader Rating: (36) Feedback Score: 36 reviews	It's all in the tune really. I got my car with 72k on it. Turbocharged it around 85kish. Drove the living shit out of it all the time, nuked one .50 trim, upgraded to a beast mode precision turbo and it handled everything I threw at it. My car was turbo from November 2007- December 2010. Then I made the decision to go with an sr to "try something new". Of course my sr committed suicide in epic fashion... Good news is, I have another ka I'm actually going to build this time around and shoot for higher power. Only problems I noticed were that the turbocharger worsened my valve stem seal leak. I attribute that to the engine being 15 years old though. That srt4 video brings back memories. hahaha I wish I'd videotaped the smoke screen that my car let out the next day when the turbo breathed it's last.

06-24-2011, 01:30 PM	#65
Skraight Leaky Injector Join Date: Jun 2011 Location: Kankakee, IL Age: 32 Posts: 73 Trader Rating: (0) Feedback Score: 0 reviews	Just got my GT2871 .86 in the mail and my 850cc top mount RC's. Ready to turn the boost up.

06-24-2011, 04:29 PM	#66
jdmspooge Post Whore! Join Date: Jan 2006 Location: San Diego Posts: 2,609 Trader Rating: (39) Feedback Score: 39 reviews	Hahaha it's always fun to walk on the SRT's and the STI's. Sad how those guys have puzzled looks on their faces when they get romped on hahaha. Love it daily!

06-24-2011, 05:56 PM	#71
future Post Whore! Join Date: Dec 2010 Location: SoCal 909 Age: 28 Posts: 4,737 Trader Rating: (42) Feedback Score: 42 reviews	Some of you huys are making me want to just throw 15lbs of boost at the ka I have and say fuck rebuilding my spare one lol.

06-24-2011, 07:48 PM	#77
DRFT180 Zilvia Addict Join Date: Nov 2003 Location: Louisiana Posts: 655 Trader Rating: (7) Feedback Score: 7 reviews	What I ended up doing with my hardlines __________________ S14 Build

06-24-2011, 07:57 PM	#79
newslidz Zilvia Member Join Date: Feb 2009 Location: ORLANDO FL... Age: 31 Posts: 259 Trader Rating: (3) Feedback Score: 3 reviews	__________________ JUST A RED TOP SR

06-24-2011, 09:54 PM	#80
mxsx25 Zilvia Junkie Join Date: Sep 2007 Location: hudson NH Age: 33 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	__________________

06-25-2011, 12:01 AM	#81
jrs Leaky Injector Join Date: Jun 2010 Location: Monterrey, Mexico Posts: 68 Trader Rating: (2) Feedback Score: 2 reviews	This is what I've got ... Custom Arias 8:8:1, Eagle Rods, Clevite Bearings, Apr Head Stud and Main Kit, Spec Stage 3, already ordered wideband and 550's, havent bought the turbo but it'll be a garret t04e, wastegate tial, fmic, downpipe, greddy rs, manifold treadstone, then I'll get cometic headgasket, walbro, and nistune for tuning, what else would you guys recommend me? Is this enough to made 350whps? Jorge

06-25-2011, 12:39 AM	#82
Spring Break '92 Zilvia Member Join Date: Dec 2007 Location: unconcious on Daytona Beach Posts: 180 Trader Rating: (1) Feedback Score: 1 reviews	jrs, sounds good. You will also need a Z32 MAF. From what Ive read on KA-T.org, people have found the Cometic HG to be somewhat problematic and the general consensus is to go with a Fel-Pro HG. Personally I am on a Cometic and have had no problems but if it ever fails I am going Fel-Pro. __________________ BOOYAH!

06-25-2011, 06:33 AM	#85
bboyoracle Zilvia FREAK! Join Date: Mar 2003 Location: Silver Spring MD Age: 37 Posts: 1,215 Trader Rating: (8) Feedback Score: 8 reviews	posted in wrong thread.......

06-25-2011, 06:52 AM	#86
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	finally have a chance to post specs cp pistons .20 over 9-1 eagle rods arp main studs arp headstuds clevite coated bearings new nissan oem water pump oil pump timing chains guides thermostat valve cover gasket oil pan gasket cometic headgasket rebuilt stock head new felrpo valves seals ect s13 cams and head s14 tranny with short shifter spec stage 3 clutch lightened flywheel crank was polised internals were all balanced line honed .20 over bore surfaced block and head turbo turbonetics .50 63 t/3 t/4 ceramic coated tgs manifold cermamic coasted tial wastegate 38mm ] jim wolf fuel rail rc 750cc rc injectors pbm high mount ic greddy rs bov i run the setup at 18psi

06-25-2011, 07:14 AM	#87
xpinoyxmk Zilvia Addict Join Date: Feb 2009 Location: FL Posts: 704 Trader Rating: (11) Feedback Score: 11 reviews	This engine bay is so clean:

06-25-2011, 08:43 AM	#88
GroundPerformance Zilvia FREAK! Join Date: Oct 2008 Location: Socal Posts: 1,477 Trader Rating: (44) Feedback Score: 44 reviews	^^ Config look familiar.. Looks like it will be running on running the SR Engine Management like mine to run COP. I'm doing the same thing now. Maybe a writeup soon to convert KA ro run SR EMS.

06-25-2011, 10:49 AM	#90
fckillerbee Post Whore! Join Date: Nov 2007 Location: Southern California Age: 36 Posts: 4,266 Trader Rating: (5) Feedback Score: 5 reviews	buddy's old setup...should be a dead give away. sorry for the shitty pics. I couldn't find a good one that he had. Schelley Racing News http://www.youtube.com/watch?v=56NkJ4WXfhQ http://www.youtube.com/watch?v=0rVaM...eature=related always enjoyed watching him drive....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode