oil light on????? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

buku_points · 03-22-2008, 08:11 PM

earlier today i was driving on the 5 south to irvine i was doing about 70 mph and hit a dip on the freeway. Right after the oil light came on and i pulled over right away. i checked the oil pan and there was no leaks so i ran the car with the oil cap on and it was still getting oil pressure. so my question is could it just be a bad oil press. sensor? or am i gonna run ionto some serious problems? theres no knocking or unusual noises coming from under the hood. thanks for all info!

*brndck* · 03-22-2008, 08:14 PM

first of all i'd check for corrosion at the connector for the sensor/sending unit. next i'd get a mechanical oil pressure gauge and check for pressure.

*fliprayzin240sx* · 03-22-2008, 09:07 PM

Dont even think of starting it till you're sure its the sensor....

916S14 · 03-22-2008, 10:02 PM

Did you dent the oil pan when you hit that dip? Like the othes said install a mechanical oil pressure gauge and check.

buku_points · 03-22-2008, 10:25 PM

i got under the car and saw no visual dents or scrapes on the bottom of the oil pan. no leaking either. tomorrow i will get an mech oil press gauge and make sure its safe.

03-22-2008, 08:11 PM	#1
buku_points Zilvia Addict Join Date: Mar 2006 Location: Cali Posts: 989 Trader Rating: (16) Rides Gallery: buku_points Feedback Score: 16 reviews	oil light on????? earlier today i was driving on the 5 south to irvine i was doing about 70 mph and hit a dip on the freeway. Right after the oil light came on and i pulled over right away. i checked the oil pan and there was no leaks so i ran the car with the oil cap on and it was still getting oil pressure. so my question is could it just be a bad oil press. sensor? or am i gonna run ionto some serious problems? theres no knocking or unusual noises coming from under the hood. thanks for all info!

03-22-2008, 09:07 PM	#3
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Dont even think of starting it till you're sure its the sensor.... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-22-2008, 10:02 PM	#4
916S14 Zilvia Junkie Join Date: Jul 2007 Location: Sacramento Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	Did you dent the oil pan when you hit that dip? Like the othes said install a mechanical oil pressure gauge and check.

03-22-2008, 10:25 PM	#5
buku_points Zilvia Addict Join Date: Mar 2006 Location: Cali Posts: 989 Trader Rating: (16) Rides Gallery: buku_points Feedback Score: 16 reviews	i got under the car and saw no visual dents or scrapes on the bottom of the oil pan. no leaking either. tomorrow i will get an mech oil press gauge and make sure its safe.